Manualios.com

Epson S5U1C17001H Operation & User’s Manual

  • S5U1C17001H Computer Hardware
  • maUAODDE2kjeU
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 31

Epson S5U1C17001H Manual Online:

3.7, 1514 votes
Epson S5U1C17001H User Manual
Epson S5U1C17001H User Guide
Epson S5U1C17001H Online Manual

Text of Epson S5U1C17001H User Guide:

  • Epson S5U1C17001H, NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requir - ing high level reliability, such as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there

  • Epson S5U1C17001H, Issue November, 2007 Printed in Japan A L (ICD Mini Ver. 1.0) S5U1C17001H User Manual EPSON Electronic Devices Website SEMICONDUCTOR OPERATIONS DIVISION http://www.epson.jp/device/semicon_e Document code: 411153600 Downloaded from Elcodis.com electronic components distributor

  • Epson S5U1C17001H, 4 CONNECTIONS S5U1C17001H USER MANUAL EPSON 9 (ICD MINI VER. 1.0) 4 Connections 4.1 Connecting the Target System 4.1.1 Target Interface Connector The 4-pin target interface connector (black) on the S5U1C17001H is used to input/output the debug signals from/ to the S1C processor on the target system. Use the target interface cable attached to the S5U1C17001H to connect between this connector and the target system. This connection is always required to perform debugging. The pin assignment of the 4-pin connector (black) on the S5U1C17001H is shown in the t

  • Epson S5U1C17001H, 10 SPECIFICATIONS S5U1C17001H USER MANUAL EPSON 23 (ICD MINI VER. 1.0) 10 Specifications Table 10.1 Specifications Components Items Specifications Remarks S5U1C17001H Dimensions 100 mm (W) × 85 mm (L) × 25 mm (H) Rubber feet included Input voltage DC 5 V Power consumption 2.5 W max. USB cable Length 1 m Connector S5U1C17001H side: Standard-B type Host PC side: Standard-A type Target system interface cable (4 pins) Length Approx. 15 cm Flash programming power supply cable (4 pins) Length Approx. 15 cm Table 10.2 Recommended Connectors on the Target System Components Items Specification

  • Epson S5U1C17001H, CONTENTS S5U1C17001H USER MANUAL EPSON i (ICD MINI VER. 1.0) - Contents - 1 Overview ......................................................................................................................... 1 1.1 Features ............................................................................................................................ 2 1.2 Operating Environment ..................................................................................................... 2 2 Components Included with Package ..........

  • Epson S5U1C17001H, 4 CONNECTIONS S5U1C17001H USER MANUAL EPSON 11 (ICD MINI VER. 1.0) 4.2 Connecting to the Host Computer Use the attached USB cable to connect the S5U1C17001H to the host computer. When the S5U1C17001H is con- nected to the host computer for the first time, the host computer will request that the USB driver be installed. Install the USB driver by the procedure shown below. The USB driver is located in the “C:\EPSON\gnu17\utility\drv_usb” directory created when the S5U1C17001C (S1C17 Family C Compiler Package) was installed. USB driver installation procedure (1) First time the S5U1C17001H is connec

  • Epson S5U1C17001H, 5 ICD MODE S5U1C17001H USER MANUAL EPSON 13 (ICD MINI VER. 1.0) 5 ICD Mode ICD mode is an S5U1C17001H operating mode for debugging the target system by connecting the S5U1C17001H to the debugger (gdb.exe) on the PC. The following explains the settings for activating ICD mode and operations. 5.1 Specifying ICD Mode Set the DIP switches as below so that the S5U1C17001H will start up in ICD mode. SW2 = OPEN SW3 = OPEN 5.2 Activation in ICD Mode After connecting the S5U1C17001H to the target system and the host computer, start up the S5U1C17001H by fol- l

  • 4 CONNECTIONS 12 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) The device manager will be displayed as shown below when the USB driver has been installed correctly. Note: If the window above is not displayed correctly, try to reinstall the USB driver. Downloaded from Elcodis.com electronic components distributor

  • Epson S5U1C17001H, 3 NAME AND FUNCTION OF EACH PART 4 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) 3 Name and Function of Each Part The following shows the name of each part of the S5U1C17001H. 3.1 Left Side Panel 4-pin Flash programming power supply connector (white) 4-pin target interface connector (black) GND pin BRK IN pin DIP switch Left Side Panel 4-pin target interface connector (black) This connector is used to input/output the debug signals (DCLK, DSIO, and DST2) from/to the S1C processor on the target system. See Section 4.1.1, “Target Interface Connector,” for the pin assignment

  • Epson S5U1C17001H, Devices S1 C 17xxx F 00E1 Packing specifications 00 : Besides tape & reel 0A : TCP BL 2 directions 0B : Tape & reel BACK 0C : TCP BR 2 directions 0D : TCP BT 2 directions 0E : TCP BD 2 directions 0F : Tape & reel FRONT 0G: TCP BT 4 directions 0H : TCP BD 4 directions 0J : TCP SL 2 directions 0K : TCP SR 2 directions 0L : Tape & reel LEFT 0M: TCP ST 2 directions 0N : TCP SD 2 directions 0P : TCP ST 4 directions 0Q: TCP SD 4 directions 0R : Tape & reel RIGHT 99 : Specs not fixed Specification Package D: die form; F: QFP, B: BGA Model number Model name C: microcomputer, digital products Product cl

  • Epson S5U1C17001H, 6 FLASH PROGRAMMER MODE S5U1C17001H USER MANUAL EPSON 17 (ICD MINI VER. 1.0) 6.2 Operations in Flash Programmer Mode The following describes how to start up the S5U1C17001H and procedure for Flash programming. (1) Set SW2 and SW3 according to the Flash operation to be performed. One of the three sequences, erasing and programming, verification only, or erasing, programming, and verifica- tion, can be selected. Table 6.2.1 DIP Switch Settings in Flash Programmer Mode SW2 SW3 Setting OPEN (↑) OPEN (↑) ICD mode (default) ON (↓) OPEN (↑) Flash programmer mode Erase → program OPEN (↑) ON (

  • Epson S5U1C17001H, 1 OVERVIEW 2 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) 1.1 Features • S1C cores supported S1C17 Core S1C33 STD Core *1 S1C33 mini Core *1 S1C33 PE Core *1 S1C33 ADV Core *1 • Host interface USB 1.1 • Data download rate Approx. 65KB/s when DCLK = 40 MHz (Max.) *2 Approx. 50KB/s when DCLK = 20 MHz *2 • Debugger mode ICD Mini mode • Program break functions PC break function Lapse of time break function Forced break function External forced break function (BRK IN pin input) • Measurement of program execution time Can be measured from within 3 µs to 6515 hours • Standalone Flash programmer function Available • Firmware update func

  • 8 PRECAUTIONS S5U1C17001H USER MANUAL EPSON 21 (ICD MINI VER. 1.0) Reset request Do not reset the target system while the target program execution is suspended as the S5U1C17001H will be unable to operate normally. Notes on target system power supply The allowable voltage range for the signals input from the target system is 0 to 5.5 V. The S5U1C17001H may fail if vo

  • Epson S5U1C17001H, 3 NAME AND FUNCTION OF EACH PART 6 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) 3.2 Right Side Panel USB connector Right Side Panel USB connector This connector is used to connect to a PC using the supplied USB cable. Note: When a bus-powered USB hub is used to connect the S5U1C17001H to the PC, there may be a shortage of drive power. Connect the S5U1C1700H directly to a PC’s USB port, or use a 5-V AC adapter with a USB connector for supplying power* especially when supplying the Flash program- ming voltage to the target

  • Epson S5U1C17001H, AMERICA EPSON ELECTRONICS AMERICA, INC. HEADQUARTERS 2580 Orchard Parkway San Jose, CA 95131, U.S.A. Phone: +1-800-228-3964 Fax: +1-408-922-0238 SALES OFFICE Northeast 301 Edgewater Place, Suite 210 Wakefield, MA 01880, U.S.A. Phone: +1-800-922-7667 Fax: +1-781-246-5443 EUROPE EPSON EUROPE ELECTRONICS GmbH HEADQUARTERS Riesstrasse 15 80992 Munich, GERMANY Phone: +49-89-14005-0 Fax: +49-89-14005-110 ASIA EPSON (CHINA) CO., LTD. 23F, Beijing Silver Tower 2# North RD DongSanHuan ChaoYang District, Beijing, CHINA Phone: +86-10-6410-6655 Fax: +86-10-6410-7320 SHANGHAI BRANCH 7F, High-Tech Bldg., 900, Yishan Road Shanghai 200233, CHINA Phone: +86-21-5423-5522 Fax: +86-21-5423-5512 EPSON

  • Epson S5U1C17001H, 6 FLASH PROGRAMMER MODE 16 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) 6 Flash Programmer Mode Flash programmer mode is an S5U1C17001H operating mode for using it as a standalone Flash programmer. The following explains the settings for activating the Flash programmer mode and operations. 6.1 Preparation for Flash Programming The Flash programming feature allows programming the target system’s Flash memory with data such as a pro- gram, which has been downloaded into the S5U1C17001H’s internal Flash memory. First download the data to program the target system’s Flash memory into the S5U1C17001H by the procedure de- scribed below. (1) Convert the file for progra

  • 3 NAME AND FUNCTION OF EACH PART 8 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) LED4 (VERIFY) This LED indicates a Flash verification selection/operation status. l (yellow) The Flash verification function is selected. W (blinking in yellow) The Flash memory is being verified. l (green) The Flash verify operation has completed normally. (O

  • 5 ICD MODE S5U1C17001H USER MANUAL EPSON 15 (ICD MINI VER. 1.0) 5.4 Connection Test The S5U1C17001H has a connection test feature to diagnose if it can communicate with the target system properly when the debugger (gdb.exe) starts up. Perform the connection test, for example, when the S5U1C17001H does not start up by the correct procedure. Use the DIP switch to select whether

  • Epson S5U1C17001H, 4 CONNECTIONS 10 EPSON S5U1C17001H USER MANUAL (ICD MINI VER. 1.0) 4.1.2 Flash Programming Power Supply Connector The 4-pin Flash programming power supply connector (white) is used to output a reset signal and a Flash pro- gramming voltage to the target system, and to input the target interface voltage. These signals are not necessary for debugging. Connect between this connector and the target system using the Flash programming power sup- ply cable attached to the S5U1C17001H as necessary. The pin assignment of the 4-pin connector (white) on the S5U1C17001H is shown in the table below. Table 4.1.2.1 Pi

  • Epson S5U1C17001H, 1 OVERVIEW S5U1C17001H USER MANUAL EPSON 1 (ICD MINI VER. 1.0) 1 Overview The S5U1C17001H (ICD Mini) is a hardware tool (emulator) that allows software to be efficiently developed for the S1C17 Family of 16-bit processors. The S5U1C17001H provides a software development environment with the debugger (gdb.exe) by communicating it to the S1C17 processor on the target system and the debugger. In addition to debugging, it can be used as a Flash programmer to program the Flash memory built into the S1C17 processor on the target system. This manual primarily explains how to use the S5U1C17001H. For details on the debugger functi

  • 3 NAME AND FUNCTION OF EACH PART S5U1C17001H USER MANUAL EPSON 7 (ICD MINI VER. 1.0) In ICD mode LED1 (CPU) This LED indicates the target CPU selected using SW1. l (blue) C17: Target CPU is an S1C17xxx or a product in which the S1C17 Core is embedded. l (green) C33: Target CPU is an S1C33xxx or a product in which the S1C33 Core is embedded. * C33 is sch

More Instructions:

DOWNLOAD

Related Products and Documents (Computer Hardware):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Axis M3007–PV Operation & user’s manual axis/m3007-pv-K54.pdf 07 Dec 2022 55 1.31 Mb
2 D-Link DFL-CP310 Operation & user’s manual d-link/dfl-cp310-5DB.pdf 27 Mar 2024 485 9.45 Mb
3 Commell MPX-24794G2 Operation & user’s manual commell/mpx-24794g2-F87.pdf 02 Feb 2024 15
4 Lenovo ThinkCentre M71e Operation & user’s manual lenovo/thinkcentre-m71e-2MX.pdf 31 Jul 2022 114
5 Logitech S315i Quick start manual logitech/s315i-Q9G.pdf 17 Jul 2023 86
6 Hark Mini Spit HK0515 Owner's manual hark/mini-spit-hk0515-5R2.pdf 05 Dec 2022 9

Similar Resources:

  • National Instruments

    R Series

    (12 pages)
    GETTING STARTED GUIDENI PXIe-7868RR Series Reconfigurable I/O Module (AI, AO, DIO) for PXI Express,6 AI, 18 AO, 48 DIO, 1 MS/s AIO, 512 MB DRAM,Kintex-7 325T FPGAThis document describes how to begin using the NI PXIe-7868R.Safety GuidelinesCaution Do not operate the NI PXIe-7868R in a manner not specified in thisdocument. Product misuse can result in a haza …
  • AVR

    ATMEGA328

    (2 pages)
    DT-AVRATMEGA328 CPU ModuleDT-AVR ATMEGA328 CPU Module is an AVR® ATmega328(P) based microcontroller module. It features an In-System Programming (ISP). This module can be connect to the DT-COMBO BASE BOARD Series and used for various applications.Specif ications 1. ATmega328(P) based (32 KB Flash Memory, 1 KB EEPROM, & 2 K …
  • Dell

    Latitude E4200

    (32 pages)
    E-Family Reimage “How-To” Guide Dell Confidential Business Client E-Family Re-Image “How-To” Guide Revision 2.0 A00 April 30th , 2010 …
  • NXP Semiconductors

    PCA9555

    (34 pages)
    1. General descriptionThe PCA9555 is a 24-pin CMOS device that provides 16 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C-bus/SMBus applications and was developed to enhance the NXP Semiconductors family of I2C-bus I/O expanders. The improvements include higher drive capability, 5 V I/O tolerance, lower supply current, individual I/O …
  • Cypress Semiconductor

    CY7C1364C

    (18 pages)
    CY7C1364C9-Mbit (256K x 32) Pipelined Sync SRAMCypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600Document #: 38-05689 Rev. *E Revised September 14, 2006Features• Registered inputs and outputs for pipelined operation• 256K × 32 common I/O architecture • 3.3V core power supply (VDD)• 2.5V/3.3V I/O p …
  • Diamond Multimedia

    ATI TV Wonder HD 650 PCI

    (2 pages)
    DIAMOND MULTIMEDIA - SPECIFICATION SHEETSKU TVW650PCIBRAND TVW650February 4, 2011 - 6:24 amENG APVD - LK 2008-01-31MRKTG APVD - LL 2008-01-31SKU TVW650PCISYSTEM BUILDER SKUPRODUCT AMD ATI TV Wonder HD 650 PCI TV TunerPRODUCT DETAILED DESCRIPTIONThe ATI TV Wonder™ HD 650 TV Tuner loads your system with a complete set of media abilities, transforming y …

Comments, Questions and Opinions: