NETGEAR Arlo Baby Operation & User’s Manual

Text of NETGEAR Arlo Baby User Guide:

• 50 Modes, Rules, and Smart Alerts Note: The device location displays as either In Zone or Out of Zone. 7. (Optional) To disable geofencing, tap the mobile device again. The check mark disappears when geofencing disabled. For more information, see Set Up Geofencing on page 47. Geofencing Accuracy For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi

• Use SmartThings With Arlo Cameras 73 6. Tap Cameras > Netgear Arlo. 7. Tap Arlo (connect). 8. Tap Connect to Arlo. 9. Enter your Arlo login credentials 10. On the bottom of the page, accept the Privacy Policy. 11. Tap Done at the upper-right corner. 12. Tap Connect to Arlo Cameras and select the cameras that you want to sync with the SmartThings app

• NETGEAR Arlo Baby, 53 Modes, Rules, and Smart Alerts You can use the sliders to adjust the sensitivity of the motion sensor: • Raise the sensitivity percentage to increase the number of videos that the Arlo Baby camera captures. • Lower the sensitivity percentage to decrease the number of videos that the Arlo Baby camera captures. • To specify motion detection zones, tap or click the zone. Note: If you’re not sure what motion sensitivity to use, you can use the motion detection test aer you finish creating the mode. Go to your camera’s settings to turn on the motion detection test. 9. Select the device that you want to record video when motion or audio is

• NETGEAR Arlo Baby, 47 Modes, Rules, and Smart Alerts 5. Under If the following, specify the motion detection and audio detection settings. 6. Under Then do the following, specify the settings for Arlo Baby to respond to motion or sound detection by recording video or taking a snapshot. 7. Under Alert, tap or click Push Notification to turn alerts on and o for your mobile device. 8. For email notifications, make sure that the Email Alerts check box is selected. 9. To specify an email address, tap or click Edit next to Email Alerts and enter the email address. Set Up Geofencing Geofenci

• NETGEAR Arlo Baby, 9 Set Up Arlo Baby Set Up Your Arlo Baby Camera Use the Arlo app and your Arlo account to set up your Arlo Baby camera. If you already set up an Arlo account, you can add the Arlo Baby camera to your account. To set up your Arlo Baby camera: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter arlo.netgear.com in the address bar of a browser. 2. If you already set up an Arlo account, log in, and tap or click Add Device. 3. If you are setting up a new Arlo account, tap or click New to Arlo? The Setup page displays. 4. Tap or click Arlo Baby. A message displays war

• NETGEAR Arlo Baby, 70 11. Tap each item in your flow to set its trigger or action. 12. Give your flow a name and tap Enable Flow when finished. Visit stringify.com for more information about how to create flows and for premade example flows that include Arlo cameras.

• NETGEAR Arlo Baby, 76 11. Troubleshooting Arlo Baby Is Not Streaming on a Mobile Device Note: The Arlo Baby Monitor includes an option for oine use. For information about the Arlo Baby Monitor, see the Arlo Baby Monitor instructions. ¾ To troubleshoot problems with your Arlo Baby video stream: 1. Check the WiFi signal strength. 2. Make sure that your Arlo Baby camera is at least 6½ feet (2 meters) away from any WiFi enabled devices, major electrical equipment, large metal or concrete objects, or other sources of signal interference. 3. Make sure that your Arlo Baby cameara�

• 78 Troubleshooting The Shortcut menu displays. 3. Tap or click Motion & Audio Settings.. The Alert Settings page displays. 4. Make sure that the Push Notification check box is selected. Check the Arlo App Settings on an iOS Device Make sure that you allow the Arlo app to receive push notifications. The Arlo app push notifications can be disabled on iOS and An

• NETGEAR Arlo Baby, View Live Video and Recordings 21 The Devices page displays. 2. Tap or click Library. 3. Tap or click the Filter icon in the upper left corner of the page. The filter page displays. 4. Tap or click filtering criteria. 5. To remove filtering, tap or click Reset. 6. Tap or click Done. The Filter icon becomes solid green to show that you are using filtering. Recordings that match your filter selections display. Dates with recordings are highlighted in dark green. Turn O the Filter The Filter icon on the Library page is solid green when you are using filtering. When filteri

• 56 6. Settings You can view and change the Arlo Baby settings. Turn the Arlo App Fingerprint ID Login On and O The Arlo app supports Touch ID fingerprint identity sensors. If you are using a mobile device with this feature, you can turn the Arlo app Touch ID login on and o. ¾ To turn the Arlo app Touch ID login on and o: 1. Tap the Arlo icon on your mobile device. The Camer

• NETGEAR Arlo Baby, View Live Video and Recordings 16 Record Clips From Live Video ¾ To record clips from live video: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Live in the camera image. The camera image icons display at the bottom of the camera image. 3. Tap or click Record Video . This icon turns red to indicate that you are recording the live feed. 4. To stop recording, tap or click Record Video . ¾ To configure your Arlo Baby camera to stop recording when motion stops: 1. Launch the Arlo app or log in to your Ar

• NETGEAR Arlo Baby, 6 Turn Night Vision On and O .......................................................................................................................................58 Turn the Microphone O and On ......................................................................................................................... 59 Change the Speaker Settings ................................................................................................................................... 59 View Device Information ....................................

• NETGEAR Arlo Baby, View Live Video and Recordings 17 2. Tap or click Live in the camera image. 3. Tap or click Snapshot . The snapshot is saved in your library. Talk and Listen ¾ To talk and listen: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Live in the camera image. 3. Tap or click Microphone . A microphone button displays. 4. Wait for the button to turn bright green. This can take up to five seconds. When the button is bright green, Talk and Listen is ready. 5. Tap and hold or click and hold the microphone button and speak. Manage Your Came

• 5 Use the Night Light......................................................................................................................................................................30 Air Sensors .....................................................................................................................................................................

• NETGEAR Arlo Baby, Continuous Video Recording 67 3. Tap or click and hold the timeline. 4. On a smartphone or mobile device, drag the timeline. • To go back in time, drag the timeline to the left (either 14 or 30 days back, depending on your CVR plan). • To move toward more recent reordings, drag the timeline to the right. 5. If you are using a browser, click to navigate to a specific time or click and drag to scroll through the timeline. 6. To return to the live feed, tap or click the Go Live button at the bottom. View the Timeline Calendar As the camera records CVR content, it notes when motion or sound was

• NETGEAR Arlo Baby, 10 Set Up Arlo Baby The Press Sync Button page displays. Syncing the Arlo Baby camera connects it to your Arlo account. 9. Press the Sync button on the camera. 10. Tap or click Continue. The How to QR Code Pair page displays. 11. Tap or click Continue. The Scan QR Code displays. 12. Hold the QR code 4 to 8 inches (10 to 20 cm) in front of the camera until you hear a chime sound. 13. When you hear a chime sound, tap or click Yes. If you do not hear a chime sound, follow the onscreen instructions. The Arlo app discovers the Arlo Baby camera and the Claim Your Device page displays. . 14. If the Arlo app do

• NETGEAR Arlo Baby, View Live Video and Recordings 18 3. Under System, tap or click Camera Order. A list of cameras displays in the order that they display on the Devices page.. 4. Tap or click Edit at the top of the page. A list icon displays. 5. Tap and hold or right-click the list icon and drag the camera to the correct position on the list. 6. Tap or click Done. Your settings are saved. Zoom a Camera Image To zoom a camera image: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices pa

• NETGEAR Arlo Baby, 79 Recalibrate the Air Sensors If you move your Arlo Baby to a new location, you might notice that you receive more alerts than usual due to dierent temperature, humidity, and air quality in the camera’s new location. If you recently moved your Arlo Baby to a new location and you are receiving too many alerts, you can power cycle your Arlo Baby to recalibrate the sensors so that they adjust to the new location and you receive fewer alerts. ¾ To recalibrate your Arlo Baby’s sensors: 1. Unplug your Arlo Baby

• NETGEAR Arlo Baby, View Live Video and Recordings 15 Access Your Live Camera Images You can access your live camera images at any time to view the feed and talk and listen to your baby. You can also manage the Arlo Baby music player, night light, and check the air conditions. ¾ To access live camera images: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. For information about these icons, see View the Camera Image Status on page 14. 2. To view and listen to a live feed, tap or click Live on the camera image. Arlo Baby Icons Description Live Feed Control Icons Description Non-stop

• NETGEAR Arlo Baby, 30 Do More With Arlo Baby Use the Night Light You can turn the night light o and on with a button on the side of Arlo Baby or by using the Arlo app. Turn the Night Light O and On With the Night Light Button The button on the right side of the camera turns the night light o and on. Turn the Night Light O and On From the Arlo App ¾ To turn the Night Light O and On from the Arlo app: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click . The Night Light controls expan

• NETGEAR Arlo Baby, Personalize Your Camera 39 Change Your Password and User Name ¾ To change your password and user name: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Under Account, tap or click Profile. The Profile page displays. 4. If you are using a smartphone, tap Edit at the top of the page. The Profile page displays. 5. Type the new entries in the password and name fields. 6. Tap or click Don

• NETGEAR Arlo Baby, Personalize Your Camera 40 3. Under Account, tap or click Profile. The Profile page displays. 4. Tap Auto Login. Your settings are saved. Grant Access to Friends You can add friends to your Arlo account. Friends can view live streams from your cameras, record video clips, and view, share, mark as favorite, and delete clips from your library, and take snapshots. Friends are granted limited access to some of the settings and features of your Arlo account. You can select which cameras friends can see and what administrative rights are available to them. Add a Friend ¾ To add

• NETGEAR Arlo Baby, 25 Do More With Arlo Baby 5. Tap or click for the sound or melody. Arlo Baby checks to make sure that there is enough storage to add the file. If there is not enough storage available, you must delete a file before you can add another file. 6. To view to your playlist, tap or click Arlo Baby Playlist. The file displays on the bottom of your Arlo Baby playlist.. Record a Sound Arlo Baby comes with a cloud library of sounds and music, but you can record additional sounds such your own voice. ¾ To record a sou

More Instructions:

NETGEAR Arlo Baby Quick start manual 05-01-2024 9

DOWNLOAD

Related Products and Documents (Baby Monitor):

Comparable Devices:

Similar Resources:

• babymoov Easy Care (32 pages) RECEIVE LEVELPOWERTRANSMITPOWERONVOXBabymoovParc Industriel des Gravanches 16, rue Jacqueline Auriol63051 Clermont-Ferrand cedex 2 - Francewww.babymoov.comEasy CareRéf. : A014015Designed and engineered by Babymoov in FranceNotice d’utilisation • Instructions for use • Gebrauchsanleitung • Gebruiksaanwijzing Instrucciones de uso • Istruzioni per l� …

• Motorola COMFORT50 (30 pages) User’s Guide Digital Video Baby MonitorModel: COMFORT50, COMFORT50-2, COMFORT50-3, COMFORT50-4The features described in this User’s Guide are subject to modifications without prior notice. …

• babymoov Babyphone Simply Care (47 pages) BabymoovParc Industriel des Gravanches 16, rue Jacqueline Auriol63051 Clermont-Ferrand cedex 2 - Francewww.babymoov.com1RWLFHGőXWLOLVDWLRQŘ,QVWUXFWLRQVIRUXVHŘ%HQXW]XQJVDQOHLWXQJŘ*HEUXLNVKDQGOHLGLQJ ,QVWUXFFLRQHVGHXVRŘ,QVWUX©·HVGHXVRŘ,VWUX]LRQLSHUOőXVRŘ1£YRGNSRXĻLW¯ Инст� …

• LorexBaby BB1811AC1 (2 pages) www.lorexbaby.comBB1811AC1_Quick Start Guide_R1 Page 11-20022013ADD-ON CAMERABB1811AC1QUICK START GUIDEx1x2x1x2 x2What’s IncludedGetting Started1212Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child.Place the camera and monitor next to each other. Make sure the monitor and the camera are turned on.Pairing the …

• The First Years Home & Away (20 pages) Before returning this product to the store for any reason, please contact our Parent Service Center at 1-800-704-8697 or [email protected], we can provide helpful tips and instructions to resolve your problem quickly over the phone or by e-mail.Y7294 04.05.11get ready for thefirstyears.com™Home& AwayPortable™Digital Video Monitor Check o …

• Voxx Accessories PNMWIFIAC (2 pages) IMPORTANT INFORMATION for Project Nursery PNMWIFIACRISK OF ELECTRIC SHOCK. DO NOT OPEN.CAUTIONCaution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily acces …

Comments, Questions and Opinions: