Samsung SVD-4332 Operation & User’s Manual

Text of Samsung SVD-4332 User Guide:

• Samsung SVD-4332, This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact

• Samsung SVD-4332, $POUFOUT 1 Contents Preface Precautions ! Safety Precautions ...................................................... 2 Chapter 1 : Preparation Names and Functions ! Product - Monitor ............................................ 4 Chapter 2 : Operation Entrance Functions ! When a visitor is outside the entrance ...................... 5 ! Checking outdoor status ............................................ 6 Interphone Functions (Optional) ! Making internal calls ..............................

• Samsung SVD-4332, 3 Do not hang from or pull on the installed\ product. ! Take special care to prevent such abuse by small children as injury may occur. Make sure to pass the user manual onto the new home owner/tenant when moving. ! It can prevent any product misuse by the new home owner/tenant. Do not use pins or any sharp, pointy objects to press buttons or to insert into holes. ! It may cause product electric shock and/or fire. Do not clean using wet cloths or volatile substances (e.g.

• Samsung SVD-4332, 5 Preparation Chapter 1  You can open the entrance door by pressing the Door Open button during a call. These functions enable user to make a call to a visitor outside the entrance or open the entrance door. &OUSBODF'VODUJPOT  ⶺ When a visitor is outside the entrance ⷅ The limits for a call time and talk time are 1 minute and 3 minutes, respectively. If a call is not made within the call time limit, the visitor’s image is recorded/stored automatically. ⷅ Each time the doorbell rings, the Call LED blinks. If you wan

• Samsung SVD-4332,  7 Operation Chapter 2  Press the Interphone button with the handset picked up. These functions enable you to make internal calls when another monitor is installed. *OUFSQIPOF'VODUJPOT0QUJPOBM  ⶺ Making internal calls  A melody sounds from sub-phone. 1. If internal calls are not answered for one minute, the calls are disconnected. 2. Internal calls are automatically hung up after 3 minutes.  Now, you can accept the call with the handset of the subphone. To hang up the call; During the speakerphone mode, press the Call button of the Monitor, during the handset mode, replace the handset of the

• Samsung SVD-4332, 9 Operation Chapter 2 -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..--- 1. During the standby mode, press the SET button repeatedly to select 8.RTC YEAR ADJUST ~ C.RTC MIN ADJUST. 2. Press the + / - or SET buttons to adjust the desired time. + : Increase the setting value - : Decrease the setting value SET : Move to the specified item. (Move to YEAR! MONTH! DAY! HOUR! MIN in turn.) 3. To save the selected settings, press the Interphone button. -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.-

• 4VQFSWJTPSTFUUJOH'VODUJPOT 11 Operation Chapter 2 1. Remove the J1 Jumper on the SVD-4332’s bottom to enter supervisor mode.(refer to 25 page) 2. Press the SET button to select a desired supervisor setting item. 3. Press + / - button to select the value for selected setting item. < SUPERVISOR MODE > 1. ID SET MASTER 2. CAMERA QUANTITY 1 3. BEL

• Samsung SVD-4332, 13 Operation Chapter 2 -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..--- 1. During the Supervisor setting mode, press the SET button repeatedly to select 4.MULTI LOBBY SET. 2. Press the + / - buttons repeatedly to select the SET, or RELEASE. SET : The DOOR2 port is connected the multi panel. RELEASE : The DOOR2 port is connected the door camera. 3. Press the Interphone button to store your setting. -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-

• Samsung SVD-4332, 15 Operation Chapter 2 -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..--- 1. During the Supervisor setting mode, press the SET button repeatedly to select the C.DOOR1 TALK TIME SET, D.DOOR2 TALK TIME SET or E.SLAVE TALK TIME SET . 2. Press the + / - buttons repeatedly to select the desired time (30SEC ~ 1HOUR). 3. Press the Interphone button to store your setting. -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..--- Set to the each talk time limit for the Door1/2 or slave port’s. ⷅ After connecting to the DOOR1/2 or SLAVE port, be sure set to the talk time limit on the C/D.DO

• Samsung SVD-4332, 17 Operation Chapter 2 -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..--- 1. During the Supervisor setting mode, press the SET button repeatedly to select the Q.CHROMA DELAY. 2. Press the + and - buttons repeatedly to select the desired time (1SEC ~ 3SEC). 3. Press the Interphone button to store your setting. -.---.-.-.-----.---.-.-. ---..-.---.-..---.---- ---.----.---.-.-...---.-. ---..-.---.-..---  ⶺ Setting the Chroma Delay Set to the Chroma delay time for image disp

• Samsung SVD-4332, 19  ⶺ  Replaying stored images  The stored images can be replayed by pressing the Record/ Replay button in standby mode.  The next image can be replayed by pressing the + and - buttons in image replay mode. ⷅ If no image is stored, the text showing “No Image” is displayed on the screen.  ⶺ Deleting the current image  The current image can be deleted by pressing Interphone button in image replay mode. Operation Chapter 2  18  ⶺ  Auto-recording of missed visitor images These functions are used to record/store visitor images. 7JTJUPS*NBHF'VODUJPOT  If a call by a visitor is disconnected by not answering the call within CALL

• Samsung SVD-4332, 21 Installation Chapter 3 $BNFSB*OTUBMMBUJPO%SBXJOH  ⶺ  Door Camera )PXUPJOTUBMM 1. Select a place to install the product. (Install the door camera and place the center of the camera at a height of 145 cm from the floor.) 2. Fix the wall mount bracket on the selected place with 2 screws. 3. Connect the connection wire of the Monitor to the door camera terminal. 4. Check that the Monitor can be called. $BVUJPOTGPSJOTUBMMBUJPO 1. Avoid the direct sunlight, or a place where rainwater spatters, or it is near chemicals and high voltage power lines. 2. Do not install in a place with too high or too low temperatures i

• Samsung SVD-4332, 23 Installation Chapter 3 To select slave mode for SVD-4332 (be sure connect to Slave1), perform the following procedure: 1. Remove the J1 shunt on the bottom of SVD-4332 to set to supervisor setting mode. 2. Press the SET button in supervisor mode to select [1. ID SET SLAVE1]. 3. Press the + and - buttons to select the [SLAVE1]. 4. Press the Interphone button to save and exit. To set the connected unit to SLAVE device, be sure set to the SLAVE ID without overlap. If the SLAVE ID is overlaped, the unit may malfunction. /PUF 22  ⶺ  4 Monitors + 2 Door cameras (2 Doo

• 25  ⶺ  Connection cable specifications  ⶺ Various settings ⷅ Do not connect to AC Power. It may result in electrical shock and/or fire. ⷅ After changing the setting switch, always turn the power off and on. 4FUUJOHT Installation Chapter 3 ⷀ Setting supervise mode [Setting J1 Jumper on the SVD-4332’ s bottom] Normal mode (Insert)

• Samsung SVD-4332, 5SPVCMFTIPPUJOH 27 Useful Information Chapter 4  ⶺ Check This First! The power does not turn on. ⷅ Make sure if the power is connected. The screen is too dark. ⷅ Check the condition of the exterior lighting in the area of the camera. ⷅ Clean the exterior surface of the door camera. ⷅ Adjust the screen brightness in the function settings. (refer to page 9) The screen brightness settings consist of 4 phases and factory default set is 2. There is too much noise during calls. ⷅ Check to see if the door phone line has been short-circuited with the ground. Ca

Related Products and Documents (Intercom System):

Comparable Devices:

Similar Resources:

• Alcad GRF-201 (20 pages) DESCRIPCIÓNEl portero electrónico es un componente ampliamente utilizado en las viviendas actuales, permitiendo de una manera sencillacontrolar el acceso a la propiedad de personas externas.El Kit de portero electrónico es la solución más cómoda para realizar este tipo de instalaciones tanto en viviendas unifamiliarescomo en edificios de hasta 12 vivi …

• Aiphone NEM-10 (2 pages) DESCRIPTION:The NEM series is a selective calling open voicestyle intercom system. Masters are available in 10,20, 30, and 40 station sizes, with optional 20 and 40call add-on selectors. Maximum capacity is 120stations. Master stations can be wall or deskmounted.Sub stations are available in surface or flush mountstyles, with or without privacy. Outdoor stat …

• Velleman CAMSET18 (18 pages) CAMSET18 B/W VIDEO INTERCOM Z/W VIDEO INTERCOMSYSTEEM INTERPHONE VIDÉO N/B VIDEOPORTERO B/N S/W VIDEO-TÜRSPRECHANLAGE VIDEOCITOFONO BIANCO/NERO USER MANUAL GEBRUIKERSHANDLEIDING NOTICE D’EMPLOI MANUAL DEL USUARIO BEDIENUNGSANLEITUNG MANUALE UTENTE …

• CyberData 011113 (86 pages) VoIP Indoor Intercom with Keypad Operations GuidePart #011113*, RAL 9003, Signal White Color*Replaces #011078Document Part #930323Lfor Firmware Version 6.3.0CyberData Corporation3 Justin CourtMonterey, CA 93940(831) 373-2601The IP Endpoint Company …

• AMX MET-ECOM-D (2 pages) Installation GuideMET-ECOM-D Metreau™ Entry Communicator with DisplayOverviewThe MET-ECOM-D Metreau Entry Communicator with Display (FG2180-05-cc) can be placed at entry points of homes, condos and hotels to provide audio/video communications with anyone at a door or gate - all over IP. Any AMX Modero intercom-enabled touch panel can interface with the Met …

• Aiphone KB-DAR-M (1 pages) Door StrikePT-1210N(AC Transformer)A1A2WIRING DIAGRAM:Aiphone Communication Systems1700 130th Ave. N.E.Bellevue, WA 98005(425) 455-0510FAX (425) 455-0071KB-DAR-M Instr.0703bkjsToll Free Technical Support:1-800-692-0200E-mail [email protected] Detector*WhiteInstallation Guidelines:1. The motion detector must provide a normally open momentary contact. A …

Comments, Questions and Opinions: