Siemens SISTORE AX9 250 Operation & User’s Manual

Text of Siemens SISTORE AX9 250 User Guide:

• Siemens SISTORE AX9 250, Appendix 112 Siemens Building Technologies Fire Safety & Security Products 03.2007 12.3 Time overlap If the DVR’s time and date have been reset to a time that is earlier than the existing recorded video, it is possible for the DVR to have more than one video stream in the same time range. In this case, you can search overlapping video streams individually by selecting a specific segment. For example, when the DVR has recorded video from one to five o’clock and the user changes the time backward from five to three o’clock and then continues recording until six o’clock, there will be

• Siemens SISTORE AX9 250, Configuration 63 Siemens Building Technologies Fire Safety & Security Products 03.2007 Actions The DVR can be set to react to system events. System events can be associated with an Alarm-Out connector, sound the DVR’s internal buzzer, and/or notify a number of different devices. 1. Highlight the Alarm-Out box beside the desired event (Check Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or Disk S.M.A.R.T.), and press the button. Î A list of Alarm Outputs appears. You can associate as many A

• Installation 26 Siemens Building Technologies Fire Safety & Security Products 03.2007 7.11 Connecting to the network port Fig. 16 Network connector The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5 cable with an RJ-45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuratio

• Siemens SISTORE AX9 250, Configuration 81 Siemens Building Technologies Fire Safety & Security Products 03.2007 2. Highlight the box beside Time Server and press the button. 3. Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number value. 4. Highlight the box beside Interval and press the button. 5. Set the time interval for synchronization from 30 minutes to 1 day at various time intervals. Î Last Sync-Time displays the last time the DVR was synchronized with the

• Siemens SISTORE AX9 250, Description of functions 19 Siemens Building Technologies Fire Safety & Security Products 03.2007 – Multiple search engines (date/time, calendar, event, motion, museum, text-in) – Records up to 200/240 images per second (PAL/NTSC) (high resolution 100/120) – “Loop-through” video connectors – Continuous recording in disk overwrite mode – Video archiving via UltraSCSI interface – 3 USB 2.0 ports – Continues recording while archiving, transmitting to remote site and during playback – User-friendly Graphical User I

• Configuration 32 Siemens Building Technologies Fire Safety & Security Products 03.2007 8.4 Setup screen Fig. 22 Setup screen Press the Menu button to enter the setup screen. While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a Virtual Keyboard will appear. Fig. 23 Virtual Keyboard Use the arrow keys to h

• Siemens SISTORE AX9 250, Appendix 115 Siemens Building Technologies Fire Safety & Security Products 03.2007 12.5 Connector pin outs I/O connector pin outs AI (1 to 16) Alarm Inputs 1 to 16 GND Chassis Ground (9 connectors) AO (1 to 16) Alarm Outputs 1 to 16 ARI Alarm Reset In RS485 connector pin outs Master unit Slave unit + J To J TX+ − J To J TX- RS232 connector pin outs Pin 1 DCD (Data Carrier Detect) Pin 2 RXD (Receive Data) Pin 3 TXD (Transmit Data) Pin 4 DTR (Data Terminal Ready) Pin 5 GND (System Ground) Pin 6 DSR (Data Set Ready

• Siemens SISTORE AX9 250, Configuration 35 Siemens Building Technologies Fire Safety & Security Products 03.2007 8.5.2 Schedule screen Highlight Schedule in the Record menu and press the button. Î The Schedule setup screen appears. Fig. 26 Schedule setup screen You can program the DVR to record only during certain times based on time, day of the week, and holidays. The smallest time segment you can use is 15 minutes. Highlighting Schedule On and pressing the button toggles between On and Off. In the Sche

• Siemens SISTORE AX9 250, Configuration 30 Siemens Building Technologies Fire Safety & Security Products 03.2007 Menu button Pressing the Menu button enters the Setup screen. You will need to enter the authorized user and password to access Setup. Pressing the button also closes the current menu or setup dialog box. In the Playback mode, pressing the Menu button displays the Search menu. In Search mode clip- copying can be done instantly by pressing and holding the button for two or more seconds. The button is also loads a Preset View in the

• Configuration 58 Siemens Building Technologies Fire Safety & Security Products 03.2007 14. Select the number of additional lines of text that you want the DVR to record. Î You can choose from 0 to 10. 15. Highlight the box beside Line Delimiter, and press the button. 16. Use the virtual keyboard to enter the character(s) that the device uses to i

• Siemens SISTORE AX9 250, Appendix 111 Siemens Building Technologies Fire Safety & Security Products 03.2007 Clicking the "X" exits the Player program. Click the to go to the beginning of the video clip. Click the to play the video clip in fast reverse. Click the to go back one frame of the video clip. Click the to play the video clip. Click the to go forward one frame of the video clip. Click the to play the video clip in fast forward. Click the to go to the end of the video clip. Click the to show th

• Siemens SISTORE AX9 250, Appendix 116 Siemens Building Technologies Fire Safety & Security Products 03.2007 12.6 Connection diagrams 12.6.1 Connecting SISTORE AX to Remote Administration Software (RAS) via dial-up connection (PSTN or ISDN) Configuration of SISTORE AX Analog modem ISDN modem Baud Rate 57600 115200 Parity None None Data Bit 8 8 Stop Bit 1 1 Usage External modem External modem The following modem is recommended for ISDN connectivity: Manufacturer: Devolo Modem type: Microlink ISDN i Distributor: www.alternate.de. The modem works with 1 channel (64 Kbit). Public telephony network RS232 A nalog- or

• Siemens SISTORE AX9 250, Operation 91 Siemens Building Technologies Fire Safety & Security Products 03.2007 9.5 Spot monitoring You can select the camera you want to display on a Spot Monitor. Press the Spot button on the front panel or remote control, and select one of four Spot Monitors. Then, select the camera to be displayed on the Spot Monitor. Fig. 104 Spot Monitor menu If you want to display more than one camera on a Spot Monitor, you can display them sequentially. In the Spot Monitor selection mode, press the Sequence button on the front panel or remote control, or select Sequence On from the menu to start displaying cameras sequentia

• Siemens SISTORE AX9 250, Guidelines and standards 14 Siemens Building Technologies Fire Safety & Security Products 03.2007 2 Guidelines and standards 2.1 EU Directive The product meets the requirements of the EU Directive 89/336/EEC on electromagnetic compatibility The EU declaration of conformity is available from: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG 76181 Karlsruhe, Germany EU Directive 89/336/EEC on electromagnetic compatibility Conformity with the EU Directive 89/336/EEC is demonstrated by compliance with the following standards: Emitted interference: EN 61000-6-4 EN 55022 Class A Resistance to

• Siemens SISTORE AX9 250, Technical data 15 Siemens Building Technologies Fire Safety & Security Products 03.2007 3 Technical data Video Signal format PAL or NTSC (auto-detect) Video input Composite: 9 or 16 looping inputs, 1 Vpp auto-terminating, 75 Ohms Monitor outputs Composite: 1 (BNC), 1 Vpp, 75 Ohms SVHS: 1 VGA: 1 - PAL: 30.8 kHz (horiz. frequency) / 50 Hz (vert. frequency) - NTSC: 30.8 kHz (horiz. frequency) / 60 Hz (vert. frequency) Video resolution PAL: 720 x 576 NTSC: 720 x 480 Playback/record speed (images per second) Standard resolution (CIF): 200 ips (PAL), 240 ips (NTSC) High resolution (2CIF):

• Siemens SISTORE AX9 250, Configuration 73 Siemens Building Technologies Fire Safety & Security Products 03.2007 8.10 Storage screen Fig. 80 Storage Menu 8.10.1 Storage Information screen Highlight Storage Information in the Storage menu and press the button. Î The Storage Information setup screen appears and displays information about the DVR’s storage devices. Fig. 81 Storage Information screen The information in the Type column describes the storage device. The capacity of the storage device is displayed in the Capacity column. The Fo

• Siemens SISTORE AX9 250, Technical data 16 Siemens Building Technologies Fire Safety & Security Products 03.2007 Environmental Operating temperature 5 – 40 °C (41 – 104 °F) Operating humidity 0 – 90% Power supply Power 100 - 240 V AC, 2 A, 50/60 Hz Power consumption 85 W max. (120 W when 3 hard-disk drives are installed) General Dimensions (WxHxD) 430 x 88 x 405 mm (16.9" x 3.5" x 15.9") Unit weight 10.2 kg (22.5 lbs) Shipping weight 12.5 kg (27.6 lbs) Shipping dimensions (WxHxD)

• Configuration 76 Siemens Building Technologies Fire Safety & Security Products 03.2007 8.11 System Fig. 85 System menu 8.11.1 Information screen Highlight Information in the System menu and press the button. Î The Information screen appears. Fig. 86 Information screen In the Information screen, you can name the site location, assign a Syste

• Siemens SISTORE AX9 250, Configuration 78 Siemens Building Technologies Fire Safety & Security Products 03.2007 Exporting settings To export the current DVR settings, connect the USB device to the DVR. 1. Highlight Setup – Export… and press the button. 2. Highlight the box beside File name and press the button. Î A virtual keyboard allows you to enter the file name. Î Selecting Export will save the current settings in .dat file format on the USB device. Fig. 89 Setup Export screen System Log Highlight Show System Log… and press the button to display the Sy

• Siemens SISTORE AX9 250, Configuration 77 Siemens Building Technologies Fire Safety & Security Products 03.2007 Upgrading the software To upgrade the software, connect a USB device containing the upgrade package file to the DVR. 1. Highlight Upgrade… and press the button. Î The Upgrade screen appears. The screen displays the upgrade package file names that are available. The “.rui” indicates that the file is for software upgrades and “.ofi” indicates that the file is for optical drive firmware upgrades. 2. Select the desired file and press the button. Highlighting the Install button and pressing the button will inst

• Siemens SISTORE AX9 250, Operation 94 Siemens Building Technologies Fire Safety & Security Products 03.2007 9.8 Recording audio If the DVR was set up to record audio, it will record audio from up to four inputs when video is recording. The DVR will not record audio when the recording speed is set to less than 1 ips. NOTE Make certain you comply with all local and federal laws and regulations when recording audio. 9.9 Playing recorded video If a user who has Search authority logs into the system, the user can view recorded image. Once video has been recorded, you can view it by pressing the Play/Pause button. When playing video for the first time, the DVR will display th

• Siemens SISTORE AX9 250, Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76187 Karlsruhe www.sbt.siemens.com © 2007 Copyright by Siemens Building Technologies AG Data and design subject to change without notice. Supply subject to availability. Printed in the Federal Republic of Germany on environment-friendly chlorine-free paper. Document no. A6V10063152 Edition 03.2007

• Siemens SISTORE AX9 250, Operation 101 Siemens Building Technologies Fire Safety & Security Products 03.2007 Fig. 115 Text-In Search Option screen You can search video from the first to last recorded images, or you can set the start and stop times and dates. 1. Highlight the box beside From and press the button to toggle between On and Off. Î When set to Off, you can enter a specific Date and Time. Î When set to On, the search will be from the first recorded image. 2. Highlight the box beside To and press the button to toggle between On and Off. Î When set to Off, you can enter a specific Date and Time. Î When set to On, the search will be from the last reco

• Configuration 42 Siemens Building Technologies Fire Safety & Security Products 03.2007 NOTE The e-mail address must include the “@” character to be a valid address. 12. Highlight the box beside Recipient and enter the recipient’s e-mail address. 13. Use the virtual keyboard to enter the e-mail address. 14. Highlight the

• Siemens SISTORE AX9 250, Appendix 113 Siemens Building Technologies Fire Safety & Security Products 03.2007 12.4 Recording tables 12.4.1 Recording times with 250 GB HDD (days) for PAL images Recording quality (standard resolution) Recording speed Very high (14.6 KB) High (9.7 KB) Standard (4.9 KB) Low (2.4 KB) 200 ips 1.0 1.5 3.0 6.0 100 ips 2.0 3.0 6.0 11.9 50 ips 4.0 6.0 11.9 23.8 25 ips 7.9 11.9 23.8 47.7 20 ips 9.9 14.9 29.8 59.6 15 ips 13.2 19.9 39.7 79.4 10 ips 19.9 29.8 59.6 119.1 5 ips 39.7 59.6 119.1 238.3 2.5 ips 79.4 119.1 238.3 476.6 1 ips 198.6 297.9 595.7 1,

• Siemens SISTORE AX9 250, Operation 95 Siemens Building Technologies Fire Safety & Security Products 03.2007 Zoom button Pressing the Zoom button zooms the current playback image on the screen. A PIP with a rectangle temporarily displays showing what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area. Pressing the (Enter) button toggles the zoom size between 2x, 3x and 4x. You can use a mouse for convenient playback control. Position the mouse pointer on the search screen, and the following search toolbar will display. Fi

Related Products and Documents (DVR):

Comparable Devices:

Similar Resources:

• Dedicated Micros D4 (113 pages) Setup GuideGuide d'installationSetup-AnleitungGuía de programaciónGuida per l'impostazionewww.dedicatedmicros.com7274 D4 COVER 27/5/02 12:02 pm Page 2 …

• Philips DVDR3506/37B (2 pages) This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.• Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly. Verbatim D …

• Digimerge DH200 (106 pages) Copyright © 2009 Digimerge Technology Inc. www.digimerge.comRight For Business™INSTRUCTION MANUALEnglish Version 1.0DIGIMERGE TOUCH™H.264 DIGITAL VIDEO RECORDER WITH TOUCH SENSITIVE CONTROLDH200 SERIES …

• HIKVISION DS-2CE17U8T-IT (16 pages) UM DS-2CE1xU8T-ITx 042618NA 1 • DS-2CE17U8T-IT • DS-2CE18U8T-IT3 TurboHD 4K Series Bullet Camera User Manual Thank you for purchasing our product. If there are any questions or requests, do not hesitate to contact the dealer. This manual applies to the models below: This manual may contain technical incorrect places or printing errors, a …

• Lorex VANTAGE LH110 ECO SERIES (5 pages) COMPLETE SECURITY CAMERA SYSTEMWATCH OVER YOUR WORLD—FROM ANYWHERE IN THE WORLD.INSTANT MOBILE VIEWINGHIGH RESOLUTION VIDEO SURVEILLANCEREAL-TIME RECORDING UP TO 9 MONTHSDAY & NIGHT, INDOOR/OUTDOOREASY CONNECT WIZARDLH110 ECO SERIESwww.lorextechnology.comTHE ECONOMICAL SOLUTION TO PROTECT YOUR HOME OR BUSINESS. …

• Samsung SHR-3010 (45 pages) DIGITAL VIDEO RECORDERSHR-3010User’s ManualTo use this product safely, have to read “Important Safety Introductions”, and thenbe well aware of the contents.GBDFESI …

Comments, Questions and Opinions: