Manualios.com

ACKERMANN 16-2017PAL / NTSC Operation & User’s Manual

  • 16-2017PAL / NTSC Security Camera
  • maFIkYJ8gtWvQ
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 19

ACKERMANN 16-2017PAL / NTSC Manual Online:

4.15, 2717 votes
ACKERMANN 16-2017PAL / NTSC User Manual
ACKERMANN 16-2017PAL / NTSC User Guide
ACKERMANN 16-2017PAL / NTSC Online Manual

Text of ACKERMANN 16-2017PAL / NTSC User Guide:

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 These operating instructions contain information that is subject to copyright. All rights are reserved. This manual should not be photo-copied, duplicated on microfilm or otherwise copied or distributed, completely or in part, without the approval of the manufacturer. The manufacturer will appreciate any errors or anything unclear in this operating manual being pointed out to us by users of our products. Due to the continuing progress and development of our products, we reserve all rights for technical alterations. Rev. 01/2017 SERVICE ADDRESS: Ackermann Instrumente GmbH E

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 CONTENTS PAGE 1. FOREWORD 4 2. PRESENTATION OF THE CAMERA 4 3. SAFETY INSTRUCTIONS

  • USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 1. FOREWORD Thank you for the trust you have shown in us by acquiring this device. To derive maximum benefit from it whilst also taking all the requisite precautions, you must read this manual. Sentences f

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 • Do not splash water onto the device or leave it in a location that is too humid; • Only use the accessories provided with the device or offered on an optional basis by the manufacturer; • This video camera is not a flameproof device. Consequently, it must not be used in the vicinity of inflammable anaesthetics. • This device was not designed for use in an ionising environment. • This device is not sterile. • The video camera’s surface temperature can reach 41°C (after a few minutes of use). Consequently, avoid any contact with this area. To avoid any risk of electric shock, this device should only be connected to a power

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 4.3 MATERIO-VIGILANCE Like any medical system, this device is subject to the provisions pertaining to a materio vigilance; any serious disfunction must therefore be promptly notified to the competent authorities and the manufacturer with the greatest possible precision. Address of the manufacturer: see on the second page Caution: Federal law restricts this device to sale by or on the order of a Physician This camera is intended

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 It is prohibited to carry out a surgical operation with the USB2 output; a video output must be connected to the monitor. Only the EMPIA2820 driver should be installed for the video camera’s USB2 output. (The driver is available with the CD delivered.) Then it will be possible to check that the video camera is operating properly and in particular to make sure that the monitor’s settings are completely satisfactory: when you disconnect the sensor, a bar test pattern will appear (except on the USB outlet [C5]). Before fitting an endoscope (or a fibrescope) to the front of the camera lens, you should check the condi

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 You should carry out the following steps: • Once the video camera is connected to the endoscope, the ambient light is reduced to a minimum, and the light source is active, film a white surface. • Activate the white balance; the message “Balance In Progress” will appear on the OLED screen of the control channel unit, or 4 white squares will appear on-screen. • Continue to film the white surface until the “Balance In Progress” message on the OLED screen of the control channel un

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 • Semi-Rigid • Flexible • User’s choice 8.2 WHITE BALANCING There are two ways of initiating the white balance. 1. From the control channel unit, by pressing the wheel when the AWB white balance icon is selected. 2. From the wheel [S3] on the pendular sensor of the button [S7] from the straight sensor. You should carry out the following steps: • Once the video camera is connected to the endoscope, the ambi

  • USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 2. Video BRIGHTNESS This parameter changes the overall brightness of the image. WINDOWS Shutter analysis window: The surface of the image by which the camera analyzes the amount of light received, in order to adapt the speed of the shutter and get the right exposure time. This function allows to obtain a good exposure. Even wh

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 9.1 MAINS CONNECTOR/ FUSES The video camera is powered via the mains connector fitted to the back panel [C2], which must be connected to the mains using the cord provided with the camera. This connector features a fuses compartment with a cover [F1] as well as the master switch for powering up the device [S9]. When replacing a fuse, you must disconnect t

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 9.3 PERIPHERAL OUTPUT A peripheral output [C6] enables print-outs, screen shots, etc. via a 3.5 mm stereo jack cable, using the control wheel on the sensor. A "p" will be displayed on the screen when this function is activated from the head of the video camera. First of all, you have to configure the activation of this output via the Tool menu (cf. section 8.3). Devices connected to the "VIDEO OUT" and &

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 11. AFTER-SALES SERVICE No special maintenance on the video camera is required. Reminder: Misuse is not covered by the guarantee. If a fault persists and it proves necessary to return the video camera to the after-sales service department, take care to send it in its original packaging. Likewise, you should send back the whole video camera (control channel unit, s

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 12.4 IF THE IMAGE IS EXTREMELY BRIGHT OR DARK • Check that the Brightness parameter is not set to the maximum or minimum setting. • Check that the Window used is neither too large nor too small (in manual mode). • Check that the light source is active. 13 TECHNICAL SPECIFICATIONS • Class I device, LF type applied part • Sensor: 1 CCD 1/4” • Resolution: (752 x 585) PAL; (768 x 494) NTSC •

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 Specifications of the coupler • Sensor: 1 CCD 1/4” • Front plug for the aluminium C Mount • Airtight video camera head made from ABS • Dimensions: L: 80mm; Ø: 30 mm • Weight: 210g • Cable length: 3 metres • Airtight 14. ELECTROMAGNETIC COMPATIBILITY 14.1 MANUFACTURER'S DECLARATION AND GUIDE – ELECTROMAGNETIC EMISSIONS The “CCD mono video camera” reference equipment is intended for use in the electromagnetic environment specified below. The user will have to make sure

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 14.2 MANUFACTURER'S DECLARATION AND GUIDE – ELECTROMAGNETIC IMMUNITY The “CCD mono video camera” reference equipment is intended for use in the electromagnetic environment specified below. The user will have to make sure that it is used in this environment. Immunity test CEI 60601 Level of Severity Compliance level Electromagnetic environment - Guide Electrostatic discharges EN 61000-4-2 ± 6 kV via contact ± 8 kV via air ± 6 kV ± 8 kV The floor must be made from wood, concrete or tiling. If the floor is covered with a s

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 14.3 MANUFACTURER'S DECLARATION AND GUIDE – ELECTROMAGNETIC IMMUNITY The equipment reference “CCD mono video camera” is designed to be used in the electromagnetic environment specified below. The user should make sure that it is used in this environment. Immunity test CEI 60601 severity level Conformity level Electromagnetic environment - Guide Conducted RF EN 61000-4-6 Radiated RF EN 61000-4-3 3 Vrms 150 kHz to 80 MHz 3 V/m 80 MHz to 2.5 GHz 3V 3V/m Mobile and portable RF communication e

  • ACKERMANN 16-2017PAL / NTSC, USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 14.4 RECOMMENDED SEPARATION DISTANCES BETWEEN MOBILE AND PORTABLE RF COMMUNICATION EQUIPMENT AND THE “CCD MONO VIDEO CAMERA” REFERENCE EQUIPMENT The equipment reference “CCD mono video camera” is designed to be used in an electromagnetic environment in which the radiated RF The “CCD mono video camera” reference equipment is intended for use in an electromagnetic environment where radiated RF disturbances are controlled. The user of the “CCD mono video camera” reference equipment can help prev

  • USER MANUAL 16-2017PAL / NTSC Rev. 01/2017 15. SYMBOLS PAGE 19 OF 19

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 TSA model INFUSION 700N Instruction manual tsa-model/infusion-700n-G6Q.pdf 22 Dec 2022 44
2 Icom IC-M710 Instruction manual icom/ic-m710-5I5.pdf 22 Jan 2024 28
3 Webasto Thermo 90 Workshop manual webasto/thermo-90-8LP.pdf 27 Aug 2023 53
4 Gefen DVI Detective Operation & user’s manual gefen/dvi-detective-41U.pdf 07 Nov 2023 10 0.14 Mb
5 Agilent Technologies U2741A Operation & user’s manual agilent-technologies/u2741a-CJI.pdf 14 Jun 2023 77 1.87 Mb
6 TRENDnet TEG-PCITXR Operation & user’s manual trendnet/teg-pcitxr-2WR.pdf 06 Nov 2022 17 0.29 Mb

Similar Resources:

  • Linkcom

    Link View CDPTZIN1.3MP

    (73 pages)
    Link View CDPTZIN1.3MPUser ManualPlease find the latest version of the manual and firmware at www.linkcom.frLink View CDPTZIN1.3MPUser ManualPlease find the latest version of the manual and firmware at www.linkcom.frLink View CDPTZIN1.3MPUser ManualPlease find the latest version of the manual and firmware at www.linkcom.fr …
  • Speco

    HTINTT5H

    (2 pages)
    OSD MENU TREEIntensifier H® Series Traditional CameraAccepts C & CS mount lenses, Dual Voltage (12VDC / 24VAC)HTINTT5H – Grey housing200 New Highway, Amityville, NY 11701800-645-5516 / www.specotech.comDIMENSIONSSide ViewITEMS Intensifier H® Series Traditional CameraLens Accepts C & CS mount lenses optionallyImage Sensor 1/3” SONY COLOR 960H C …
  • Logitech

    Alert 700n

    (2 pages)
    For PCPour PCPara PCPara PCGetting started withLogitech® Alert™ 700n Add-On Camera English1 Logitech Alert Camera2 Camera power supply3 Power supply cable (yellow tips)4 Mounting accessories5 Suction cup6 Desktop stand7 Power supply cable extender8 System Requirements GuideFrançais1 Caméra Logitech Alert2 Bloc d'alimentation de la caméra …
  • HIKVISION

    DS-2CE56D1T-IRM

    (2 pages)
    TVI Turret CameraUser ManualThank you for purchasing our product. If thereare any questions, or requests, please do nothesitate to contact the dealer.This manual applies toThis manual may contain several technicalincorrect places or printing errors, and thecontent is subject to change without notice.The updates will be added to the new version ofthis manual. …
  • zkivision

    ZKIP3 Series

    (24 pages)
    User’s Manual for ZKIP3 Series Standard Box IP Camera Document Version: 1.7 Date: 2012.10 Introduction This document mainly introduces the functional features, installation process and access methods of ZKIP3 series IPC. …
  • Samsung

    SCP-2273

    (2 pages)
    www.samsungsecurity.comFIRST EDITION 10-2013The SCP-2273/2273H is a high-resolution 680TV lines PTZ dome that hosts a powerful 27x optical zoom lens. The excellent 0.2/0.01Lux low light performance is further enhanced by Samsungs SSNRIII noise reduction technology. Advanced features further improve the dome’s capabilities suchas; alarm schedules, highl …

Comments, Questions and Opinions: