Manualios.com

AEQ BC 2000 Hardware Manual

AEQ BC 2000 Manual Online:

3.1, 1570 votes
AEQ BC 2000 User Manual
AEQ BC 2000 User Guide
AEQ BC 2000 Online Manual

Text of AEQ BC 2000 User Guide:

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 48 3.19. BC2214 and BC2224. Multi-channel audio over IP module with Dante protocol of 32 channels (BC2214) or 64 channels (BC2224). General description. The BC2214 board manages up to 32 TDM bus time-slots to send and/or receive them through a bidirectional multi-channel link of 32 audio channels over IP with Dante technology. The BC2224 board has twice the capacity of the BC2214 board, it manages up to 64 TDM bus time-slots and 64 AoIP Dante audio chann

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 35 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designed to support hot-swapping operations. - Digital adjustment of digital gain (±12 dB) in the 4 inputs and the 4 outputs. Programming jumpers. This board has a series of internal programming jumpers (PJ). However, these jumpers are configured at th

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 73 Loading of power receivers type-approved for BC2293. To calculate the number of equipment items that can be connected to this power supply, add the estimated power consumption values for all the equipment and boards, leaving a 30-watts safety margin. Device Estimated consumption BC2201 board 9 W BC2202 board 4 W BC2203M/BC2203ML board 6 W BC2203MH/BC2203MHL board 7.5 W BC2204/BC2205 board 9 W BC2206/BC2207 board

  • BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 78 5.2. Wiring kits for BC 2000 D system. 5.2.1. Standard wiring kit. Given below is the “Standard wiring kit” diagram showing the configuration of the wiring, racks and modules for a console of typical dimensions. The description covers everythin

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 52 General characteristics. - Approximate consumption: 4 watts. - Approximate dimensions: Front: 17 x 172 mm. Depth: 255 mm. - Approximate weight: 260 grams. Characteristics are subject to change without notice.

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 45 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designed to support hot-swapping operations. Programming jumpers. This board has a series of internal programming jumpers (PJ). However, these jumpers are configured at the factory and, in normal operation, do not

  • BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 71 Loading of power receivers type-approved for BC2292. To calculate the number of equipment items that can be connected to this power supply, add the estimated power consumption values for all the equipment and boards, leaving a 30-watts safety margin. De

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 51 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designed to support hot-swapping operations. Programming jumpers. This board has a series of internal programming jumpers (PJ). However, these jumpers are configured at the factory

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 42 3.16. BC2212. Dual AES 10 MADI module for linking racks. General description. The BC2212 board has twice the capacity of the BC 2211 board. The BC 2212 manages up to 128 TDM bus time-slots to send and/or receive them through two 125-Mbps MADI multichannel digital audio links using coaxial or optical fiber cable. These two MADI links are independent. This board allows you to interconnect up to three BC 2000 D racks (you can use each of the two MADI links to connect to o

  • BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 27 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit des

  • BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 13 3.3. BC2203MH. Analog MIC/LIN inputs and headphone outputs module. General description. The BC2203MH board is capable of managing four TDM IN bus time-slots to insert four analog mono signals into the system with mic or

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 66 Firmware modules. At the firmware level, this board is made up of the following module: - PIC microcontroller: manages board communications and start-up. The firmware versions can be brought up to date by using the ”BC2000D Firmware Upgrade” software application. General characteristics. - Approximate consumption: 7 watts. - Approximate dimensions: Front 99.5 x 172 mm. Characteristics are subject to change

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 30 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designed to support hot-swapping operations. - Digital adjustment of digital gain (±12 dB) in the 4 outputs. - Possibility of converting the module so that it can use SPDIF signals by manipulating

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 3 CONTENTS 1. Introduction: Organization of BC-2000 D system manuals……....................................... 4 2. BC2000DF / BC2000DF-3. System rack......................................................................... 5 2.1. Ventilation units..................................................................................................... 6 3

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 9 GPI inputs: - Inputs protected by optocoupler (4N35). - Maximum input current: 60 mA. - A voltage ranging from 5 V to 30 V will be applied. GPO outputs: - Outputs protected by optocoupler (TLP371). - Maximum current: 80 mA. - Recommended maximum voltage: 200 V. - Maximum power: 250 mW at 40º C. - Requires external power supply. General characteristics. - Approximate consumption: 9 watts. - Approximate dimensions: Front: 17 x 172 mm. Depth: 255 mm. - Approximate weight: 315 grams.

  • BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 21 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designe

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 74 5. Standard wiring systems for BC-2000 D system. Various wiring accessories and kits have been defined to make it easier to make the audio and GPI/GPO connections required by the BC 2000 D consoles and matrixes. The high degree of integration of the BC 2000 D makes it possible to use 8-pole, high density, RJ45 type connectors on the input and output boards.

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 81 6. Switch. We strongly recommend, as shown in the standard configuration diagram, connecting the different consoles and racks, as well as a computer with the setup software, through a switch in each BC 2000 D installation. Any good quality switch can be used. If you are not sure which product to choose for the best operation, we offer a good AEQ-compatible switch wh

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 67 4. Power supplies. 4.1. BC2290. 2x300W Power Supply. General description. BC2000D system power supply. Delivers up to 300 watts between 1 and 5 48V DC outputs. This power supply is equipped with two 300-watt converters, one of which is normally operational while the other serves as a redundant back-up unit. The converters are accessible from the front panel and can be hot-swapped without having to power down the entire system. Descripción del Panel Frontal. Rear Panel

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 25 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. - Power feed circuit designed to support hot-swapping operations. - Digital adjustment of analog gain (±12 dB) in the 4 outputs. - Digital adjustment of digital gain (±12 dB) in the 4 outputs. Programming jumpers. This board has a series of internal programming jumpers (PJ). However, these

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 60 Other characteristics and features. - Internal warning signal indicating a failure in one of the power supplies. If a failure occurs, the “ALARM” LED on the BC2240 controller board will light up. Programming jumpers. This board has a series of internal programming jumpers (PJ). However, these jumpers are configured at the factory and, in normal operation, do not

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 12 Signal layout in the RJ45 connectors of the board. NOTE: Pin layout corresponds to T568B standard. BC2202 technical specifications. Digital inputs: - Isolated by transformer. - SRC converters accept signal at 32, 44.1, 48 and 96 kHz and 16, 20 or 24 bits. Digital outputs: - Default digital signal format: 24 bits, 48 k

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 85 7.2. ARENA D10 channel expansion module. Composition of the supply. • The module itself. • One 2-meter power supply cable. • Flexible shielded RJ45/RJ45 cable for ARENA D10, 2 meters long. Connection and other rear panel elements. • 1. Power switch • 2. Power supply connector and fuse. • 3. Pair of RJ45 input and output connectors, where output follows the RS 422 control from the main ARENA DM module and toward others, for ARENA D10 channel expansion modules. Pin-to-pin connection

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 72 4.4. BC2293. 2x800W Power supply. General description. BC2000D system power supply. Delivers up to 800 watts between 1 and 5 48VDC outputs. This power supply is equipped with two 800-watt converters, one of which is normally operational while the other serves as a redundant back-up unit. The converters are accessible from the front panel and can be hot-swapped without having to power down the entire system. Front Panel Description. Rear Panel Description. Uses connectors with SPEAKON type interlo

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 7 3. Inputs/outputs, communications and control modules. 3.1. BC2201. Analog line inputs/outputs module. General description. The BC2201 board can manage four TDM IN bus time-slots to insert two analog stereo (or four mono) signals into the system with line level, and four TDM OUT bus time-slots to extract two analog stereo (or four mono) signals from the system with line level. This board is inserted into the rear part of the BC2000DF rack. Panel description. 'HW ERR

  • AEQ BC 2000, BC 2000 DIGITAL Audio Routing, Mixing and Processing System for Program Production Centers HARDWARE MANUAL 22 3.7. BC2204. Analog line inputs module. General description. The BC2204 board can manage four TDM IN bus time-slots to insert two analog stereo (or four mono) signals into the system with line level. This board is inserted into the rear part of the BC2000DF rack. Panel description. 'HW ERROR' red LED*: this LED will turn on when the system starts and, depending on its status, it will ind

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 White-Westinghouse WTR1240AS0 Owner's manual white-westinghouse/wtr1240as0-142.pdf 24 Feb 2024 11 0.71 Mb
2 Acer Aspire 5538 Series Service manual acer/aspire-5538-series-26M.pdf 16 Nov 2023 226 7.46 Mb
3 Craftsman 917.374820 Owner's manual craftsman/917-374820-9IO.pdf 09 Sep 2023 48
4 Panasonic CQ-DFX201N Operating instructions manual panasonic/cq-dfx201n-WN1.pdf 27 Feb 2024 24 0.72 Mb
5 Gigabyte GA-8IPE1000 Pro-G Operation & user’s manual gigabyte/ga-8ipe1000-pro-g-96Z.pdf 29 Dec 2022 112 6.18 Mb
6 Fujitsu N6460 - LifeBook Operation & user’s manual fujitsu/n6460-lifebook-7HZ.pdf 18 Jan 2023 120 2.72 Mb

Similar Resources:

  • D-Link

    DGS-1024D - Switch

    (9 pages)
    Product Installation Guide and enterprise branch and head offices DGS-1024D D-LINKwww.enochsystems.com1-877-722-1116 [email protected] © 2013 Enoch Systems, LLC, Enoch Systems and the Enoch Systems logo are trademarks or registered trademarks of Enoch Systems, LLC …
  • D-Link

    DNS-G120

    (2 pages)
    DNS-G1201FEATURESWireless Network Storage Adapter The D-Link DNS-G120 wireless network storage adapter is an attractive solution for homeand small office with storage requirements. This device connects your USB drives to an Ethernet or wireless network, and provides authorized users access to their files. You can connect up to 2 external U …
  • TP-Link

    Archer C20

    (2 pages)
    Quick Installation GuideWiredConnect wirelessly by using the default network name (SSID) and password printed on the product label at the bottom of the router.Open a web browser on the computer and configure the router according to the following main clues.Enter http://tplinkwifi.net in the address bar. Alternatively, enter http://192.168.0.1 or http://192.1 …
  • NETGEAR

    DG834PN - RangeMax ADSL Modem Wireless Router

    (108 pages)
    August 2005BETAAugust 2005NETGEAR, Inc.4500 Great America Parkway Santa Clara, CA 95054 USAPhone 1-888-NETGEARReference Manual for the Model DG834PN 108 Mbps RangeMaxTM Wireless ADSL Modem Router …
  • NETGEAR

    RBR850

    (142 pages)
    User ManualOrbi Whole Home Tri-BandMesh WiFi 6 SystemOrbi Router Model RBR850Orbi Satellite Model RBS850Orbi Router Model RBR840Orbi Satellite Model RBS840NETGEAR, Inc.350 E. Plumeria DriveApril 2020San Jose, CA 95134, USA202-11974-06 …
  • Bay Networks

    BayStack ARN Routers none

    (156 pages)
    Part No. 114200 Rev. ANovember 1996Router Software Version 11.00 Rev. 4nSite Manager Software Version 5.00 Rev. 4n Installing and Operating BayStack ARN Routers …

Comments, Questions and Opinions: