Airlink101 AICN1777W Quick Installation Manual

Text of Airlink101 AICN1777W User Guide:

• Airlink101 AICN1777W, 1 • Wireless N Night Vision Pan & Tilt Network Camera • AC Power Adapter • Wall Mount Kit • GPIO & RS485 Adapter • Ethernet Cable (RJ-45 type) • Setup CD • Quick Installation Guide z Accessing the Camera using Web Browser - Supported Browsers: Microsoft® Internet Explorer 6.0 or above; Apple Safari and Mozilla Firefox with JAVA plug-in for MJPEG and QuickTime plug-in for MPEG4  CPU: Intel Pentium III 800MHz or above  RAM: 512MB  Resolution: 800x600 or above z Accessing the Camera using Software

• 2 Getting to Know Your Camera  Front and Top View Infrared LEDs (X7) allow the camera to capture clear images in a dark environment. Internal Microphone allows the camera to receive sound and voice. LED Indicators: Power (left, steady amber light) indicates the camera is powered on. Link (right, flashing green light) ind

• Airlink101 AICN1777W, 3  Rear View GPIO is used to connect the external devices. Reset Button will restart the camera when it is pressed quickly; when it is pressed and held for five seconds, the camera will restore the factory default settings. DC Power Connector connects the AC power adapter, in order to supply power to the camera. Ethernet Cable Connector* connects to the network cable, which supports the NWay protocol so that the camera can detect the network speed

• Airlink101 AICN1777W, 4 Hardware Installation Step 2.1 Attach the included external antenna to the camera. Step 2.2 Connect one end of the Ethernet cable to the IP Camera and connect the other end to one of the LAN ports on your router or switch. Step 2.3 Power on the IP Camera by connecting one end of supplied power adapter to the power jack of the Camera and connecting the other end to an electrical outlet. Step 2.4 Verify that the orange light (Power) is solid and the green light (Link) is blinking. Section 2

• Airlink101 AICN1777W, 5 Installing SkyIPCam Utility and UltraView Step 3.1 Insert the provided CD into your computer’s CD ROM drive. Step 3.2 Click on Install Utility and Software when the autorun menu pops up on the screen. Section 3

• Airlink101 AICN1777W, 6 Note: If you do not see the above autorun menu pops up on the screen, please go to your CD-ROM drive > UltraView folder > run “Setup.exe”. Windows 7 and Vista users: an AutoPlay window pops up on screen, please make sure you give permission to run the setup program by clicking Autorun.exe.

• 8 Configuring the Camera Step 4.1 Go to Start > (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam Utility. Step 4.2 Click on Search to find the camera on your network. Select the Camera you wish to configure and click on Link. Note If the Camera you wish to configure does not show up in the utility, make sure the camera is proper

• 9 Step 4.3 When you are prompted for the user name and password, enter “admin” for both User name and Password, and click OK. Step 4.4 The camera viewing window will appear. Click on Setup, then click on Smart Wizard.

• Airlink101 AICN1777W, 10 Step 4.5 Enter a name for your camera and a location (i.e. RoomA01). Create a password and enter to Admin Password and Confirm Password. This will change the admin password of the camera. It is recommended to modify the admin’s password to protect your privacy. Click Next. Step 4.6 You may simply accept the suggested default setting DHCP if your router’s DHCP server is enabled, so the router will automatically assign a dynamic IP address to your camera. Another option is to s

• Airlink101 AICN1777W, 11 Step 4.7 If you would like to set up email alerts that you can receive in the future, enter your email information here. You can get this information from your Internet Service Provider. You can also set this up at a later time. Click Next. Step 4.8 If you would like to connect the camera wirelessly to the network, enter the wireless information according to your wireless router’s (or access point’s) wireless settings. You can log into the router’s (or AP’s) web configuration pages to get the SSID and encryption details. Click Next.

• Airlink101 AICN1777W, 13 Viewing Image Method A > Access Camera from SkyIPCam Utility Step 5.1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link button. Go to Step 5.3. Section 5

• Airlink101 AICN1777W, 14 Method B > Access Camera from Web Browser Step 5.1B If you assigned a static IP address for your camera (at Step 4.6), you may open the Web Browser on your computer. Step 5.2B Type the IP address of your camera in the Address bar, and press Enter. Step 5.3 Enter user name and password, then click OK. The default user name and password are both “admin” if you did not make any change to it at Step 4.5.

• 15 Step 5.4 Internet Explorer User: If this is the first time for your computer to view image from the web configuration page, you will be prompted to install the ActiveX Control. Click on the bar on top of the screen and click on Run Add-on or Install ActiveX Control (depends on different IE versions). Step 5.5 Click on Run, then you will be able to view the image. Note If

• Airlink101 AICN1777W, 17 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com * AICN1777W supports most of the mobile devices, but compatibility with every mobile device is not guaranteed. ** Monitoring multiple cameras simultaneously demands high performance computer system. *** Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic as well as network overhead lower actual data throughput rate. Specifications are subject to change without notice. Photo of product may not reflect actual co

More Instructions:

Airlink101 AICN1777W Operation & user’s manual 11-01-2023 82

DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Canon VB-M40 (2 pages) Network Video Recording Software Ver.1.0Viewer Operation GuideThis guide describes the basic operation of the RM-Lite Viewer. For a more detailed description of the operation, see the “Administrator’s Manual” on the supplied CD-ROM.ToolbarThe toolbar has buttons for accessing commonly used functions.Audio PanelLets you send/receive live audio for a cam …

• D-Link DCS-5020L (6 pages) Technical Support Setup Procedure How to Change the DCS-5020L Login Password Step 1: Run the CD Set-Up that came with the DCS-5020L. On the Set-Up Wizard screen click …

• Samsung SNB-7000 (1 pages) 3MKey FeaturesREVISED 09-2012• Max. 3M (2048 x 1536) resolution• 16 : 9 Full HD (1080p) resolution support• H.264, MJPEG dual codec• Multiple streaming• Smart compression (ROI encoding)• Intelligent video analytics• PoE, SD memory, Bi-directional audio supportSNB-70003 Megapixel Full HD Network CameraDimensionsAvailable Lenses / Accessories (Op …

• Ubiquiti UniFi (20 pages) UniFi LED PanelPackage ContentsSystem RequirementsAn 802.3at-compliant network switchUniFi LED mobile app softwareMobile device: iOS 10 or Android 5.0UniFi LED Controller softwareComputer: UniFi Application Server (UAS) 0.5.0, Ubuntu 16.04 LTS (Xenial Xerus)64-bit or Debian 9 64-bitWeb browser: Google Chrome (Other browsers may have limited functionality.)Un …

• AVYCON CAT5 (2 pages) 2MP/5MP/8MP IP CamerasQUICK START GUIDEFIXED VANDAL DOME CAMERACAT5 / 6 / 7IntroductionSafety InstructionsPackage ContentsInstallation2345Network Cable Setup61CONTENTSResources8Network Connection7INTRODUCTION2Thank you for purchasing our product. We make every effort to update and ensure accuracy of the information contained in this manual, which may be subj …

• urmet domus H.265 5M ECO 2 (56 pages) DS1099-130 Mod. 1099 H.265 5M ECO 2 IP Camera Bullet Camera IP Sch. 1099/500A Bullet Camera IP Varifocal Sch. 1099/501A Bullet Camera IP Varifocal Sch.1099/502A Camera IP 1099/550A Dome Camera IP Varifocal 1099/551A …

Comments, Questions and Opinions: