Allnet ALL-CAM2305-LW Operation & User’s Manual

Text of Allnet ALL-CAM2305-LW User Guide:

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 89 capacity, free space, status, type and property of the disk. Figure 6-51 Storage Management Interface (2) If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and click Format to start initializing the disk. When the initialization completed, the status of disk will become Normal. Figure 6-52 View Disk Status 3. Define the quota for record and pictures. (1) Input the quota percentage for picture and for record. (2) Click

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 68 information such as the wall, and get more meaningful information of the scene. Scene Mode: Choose the scene as indoor or outdoor according to the real environment. Video Standard: 50 Hz and 60 Hz are selectable. Choose according to the different video standards; normally 50 Hz for PAL standard and 60 Hz for NTSC standard. Capture Mode: It’s the selectable video input mode to meet the different demands of field of view and resolution.  O

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 25 Figure 4-7 WEP Mode  Authentication - Select Open or Shared Key System Authentication, depending on the method used by your access point. Not all access points have this option, in which case they probably use Open System, which is sometimes known as SSID Authentication.  Key length - This sets the length of the key used for the wireless encryption, 64 or 128 bit. The encryptio

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 99 in the Set playback time field. You can also click to zoom out/in the progress bar. Figure 7-4 Set Playback Time Figure 7-5 Progress Bar The different colors of the video on the progress bar stand for the different video types. Figure 7-6 Video Types

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 62 information is less focused. Steps: 1. Enter the ROI settings interface Configuration > Advanced Configuration > Video / Audio >ROI Figure 6-26 Region of Interest Settings 2. Draw the region of interest on the image. There are four regions can be drawn. 3. Choose the stream type to set the ROI encoding. 4. Choose the ROI type.

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 101 Figure 8-2 Log Searching 4. To export the log files, click Save log to save the log files in your computer.

• © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 40 pictures and clipped video files. Valid for the pictures you captured with the web browser.  Save snapshots in live view to: Set the saving path of the manually captured pictures in live view mode.  Save snapshots when playback to: Set the saving pa

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 98 Figure 7-2 Search Video 3. Click to play the video files found on this date. The toolbar on the bottom of Playback interface can be used to control playing process. Figure 7-3 Playback Toolbar Table 7-1 Description of the buttons Button Operation Button Operation Play Capture a picture Pause / Start/Stop clipping video files Stop / Audio on and adjust volume/Mute Speed

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 51 3. Configure the 802.1X settings, including EAPOL version, user name and password. Note: The EAPOL version must be identical with that of the router or the switch. 4. Enter the user name and password to access the server. 5. Click Save to finish the settings. Note: A reboot is required for the settings to take effect. 6.3.7 Configuring QoS Settings Purpose: QoS (Quality of Service) can help solve the network delay and network congestion by configuring the priority of data sending. Steps: 1. Enter the QoS Settings interface: Configuration

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 121 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guara

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 54 SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not secured). And the SSL SMTP port is 465. Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP server. Attached Image: Check the checkbox of Attached Image if you want to send emails with attached alarm images. Interval: The interval refers to the time between two actions of sending attached pictures. Authentication (optional): If your email server requires authentication, check this che

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 73 Notes:  Check the checkbox of Notify Surveillance Center if you want to the alarm information pushed to your mobile phone as soon as the alarm is triggered.  Click for help when you configure the intelligent functions, including face detection, audio exception detection, intrusion detection, defocus detection, scene change detection, etc. A help document will guide you to go through the configuration steps. 6.6.1 Configuring Motion Detection Purpose: Motion detection detects the moving objects in the configured surveillance area, and triggers the certain

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 116 Figure A.1.2 Modify Network Parameters  Restore default password Steps: 1. Contact our technical engineers to get the serial code. Note: Serial code is a series of characters combined by the start time and the serial number of the device. 2. Input the code in the Serial code field and click Confirm to restore the default password.

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 61 6.4.2 Configuring Audio Settings Steps: 1. Enter the Audio Settings interface Configuration > Basic Configuration > Video / Audio > Audio Or Configuration > Advanced Configuration > Video / Audio > Audio Figure 6-25 Audio Settings 2. Configure the following settings. Audio Encoding: G.722.1, G.711 ulaw, G.711alaw, G.726, and MP2L2 are selectable. And 32kbps, 64kbps, and 128kbps are supported if MP2L2 is selected. Audio Input: MicIn and LineIn are selectable for the connected microphone and pickup respectively. Input Volume: 0-100 Envi

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 85 6.6.7 Configuring Intrusion Detection Intrusion detection can set an area in the surveillance scene and once the area is been entered, a set of alarm action is triggered. Steps: 1. Check the Enable Intrusion Detection checkbox. 2. Click Draw Area, and then draw a rectangle on the image as a defense region. Note: when you draw the rectangle, all lines should connect end to end to each other. Up to four areas are supported. Figure 6-49 Configuring Intrusion Area You can click Cl

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 92 time or the event. For example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the camera records until 11:00:05. The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min. Note: The record parameter configurations vary depending on the camera model. 4. Click Edit to edit the record schedule. Figure 6-56 Record Schedule 5. Choose the day to set the record sc

• © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 49 messages to the surveillance center. Note: The SNMP version you select should be the same as that of the SNMP software. And you also need to use the different version according to the security level you required. SNMP v1 provides no security and SNMP v2 requires p

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 28 Note: Support of this mode is mandatory for both the Access Points and the connecting devices. 3. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button and you can see the indicator near the button start flashing, which means the WPS function of the router is enabled. For detailed operation, please see the user guide of the router. 4. Push the WPS button to enable the function on the camera. If there is not a WPS button on the camera, you can also click the virtual button to enable the PBC function on the web interface. 5. Click Connect button.

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 74 objected displayed with the rectangles. Select disable from Configuration-Local Configuration-Live View Parameters-rules. Figure 6-37 Enable Motion Detection (4) Click Draw Area. Click and drag the mouse on the live video to draw a motion detection area. (5) Click Stop Drawing to finish drawing one area. (6) (Optional) Click Clear All to clear all of the areas. (7) (Optional) Move the slider to set the sensitivity of the detection. 2

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 41 Figure 6-2 Time Settings  Select the Time Zone. Select the Time Zone of your location from the drop-down menu.  Synchronizing Time by NTP Server. (1) Check the checkbox to enable the NTP function. (2) Configure the following settings: Server Address: IP address of NTP server. NTP Port: Port of NTP server. Interval: The time interval between the two synchronizing actions with NTP server. Figure 6-3 Time Sync by NTP Server Note: If the camera is connected to a public network, you should use a NTP se

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 46 Figure 6-9 DDNS Settings 2. Check the Enable DDNS checkbox to enable this feature. 3. Select DDNS Type. Four DDNS types are selectable: HiDDNS, IPServer , NO-IP, and DynDNS.  DynDNS: Steps: (1) Enter Server Address of DynDNS (e.g. members.dyndns.org). (2) In the Domain text field, enter the domain name obtained from the DynDNS website. (3) Enter the Port of DynDNS server. (4) Enter the User Name and Password registered on the DynDNS website. (5)

• © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 59 Figure 6-24 Configure Video Settings 2. Select the Stream Type of the camera to main stream (normal), sub-stream or third stream. The main stream is usually for recording and live viewing with good bandwidth, and the sub-stream and third stream can be used for live viewin

• © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 115 Note: Device can be searched and displayed in the list in 15 seconds after it went online; it will be removed from the list in 45 seconds after it went offline.  Search online devices manually You can also click Refresh to refresh the online device list manually. The newly searched

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 119 ALLNET GmbH Computersysteme declares that the device ALL-CAM2305-LW is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of conformity can be found under this link: www.allnet.de/downloads.html. ALLNET GmbH Computersysteme declares that the device ALL-CAM2388-LVE is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. The Declaration of conformity can be found under this link: www.allnet.de/downloads.html.

• Allnet ALL-CAM2305-LW, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten 32 operations for each function. Menu Bar: Click each tab to enter Live View, Playback, Log and Configuration page respectively. Display Control: Click each tab to adjust the layout and the stream type of the live view. And you can click the drop-down to select the plug-in. For IE (internet explorer) user, webcomponents and quick time are selectable. And for Non-IE user, webcomponents, quick time, VLC or MJPEG is selectable if they are supported by the web browser. Live View Window: Display the live video. Toolbar: Operation

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Digital Watchdog MEGAPIX PANO DWC-PZV2M72T (2 pages) Quick Start GuideDWC-PZV2M72TWHAT’S IN THE BOXQSG Manual 1 SetScrew & Plastic Anchor – 4pcs1 SetManual CD 1 Set Tor x Wrench 1 SetTemplate Sheet 1 SetUsername: admin Password: adminAttention: This document is intended to serve as a quick reference page for initial set-up. It is recommended that the user read the entire instruction manual for comple …

• Reolink Go (9 pages) ・ RMA ContactVisit https://support.reolink.comSubmit a Request withyour Order No.Reolink After Servicewill contact with youfor processingOrderRMA・ Technical SupportSubmit a RequestTechnicalsupportTroubleshooting your problemVisit https://support.reolink.comQSG2_AReolink GoQuick Start GuideTest Model：Reolink GO …

• Trakm8 dogcam Bullet HD2 (10 pages) RoadHawk, c/o Trakm8Unit 9B, Callywith Gate Ind Est, Bodmin, PL31 2RQTel. 01208 269 159Web. www.roadhawk.co.ukThese instrucons cover the following cameras:dogcam Bullet HD2dogcam Bullet R+RoadHawk Ride Bullet R+RoadHawk Bullet R+ Moto EdionRoadHawk Ride R+ Cycle EdionThese cameras represent a revoluon in high denion bullet cameras. Not only …

• Schäfter+Kirchhoff SK6288U3KOC (32 pages) SK6288U3KOC32 Sample Configuration1 CCD line scan camera SK6288U3KOC mounted with2 Mounting bracket SK51053 Clamping claws SK51024 Photo lens SK1.4/50-40 (integrated focus/aperture adjustment)41Schäfter + Kirchhoff © 2016 • Line Scan Camera SK6288U3KOC Manual (02.2016) • shared_Titel_ML.indd (02.2016)Kieler Str. 212, 22525 Hamburg, Germa …

• Lorex Vantage CVC7572 Series (2 pages) FOR SUPPORT AND INFORMATION, VISIT WWW.LOREXTECHNOLOGY.COMProduct InformationUser ManualsQuick Start GuidesSpecification SheetsSoftware UpgradesFirmware UpgradesContents• IR Night Vision Camera*• Mounting Kit / Allen Key*• 60ft BNC / Power Extension Cable*• Power Adapter**• BNC-to-RCA Adapter***Copyright © 2012 Lorex Technologies In …

• Lumens VC-A61P (2 pages) www.MyLumens.com1. A view of the camera's I/O interface3. Install the camera on the ceiling1.Please adjust the resolution on DIP Switch prior to installation. (Please refer to )2.Fix the metal plate A on the machine base with 4 M3 silver screws.2. Instruction on DIP SWITCH Setting3.Lock the metal plate B on ceiling mounted hanger※Caution:(1) Please u …

Comments, Questions and Opinions: