ALTAI A8n Configuration Manual

Text of ALTAI A8n User Guide:

• ALTAI A8n, 30 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Configure WLAN with WAPI-PSK Authentication Figure 29 – WAPI-PSK Setting of AP 1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN > WLAN 0-15 > WLAN Security 2. Select WAPI in Authentication Mode 3. Select SMS4 in Cipher Mode 4. Type in a string between 8 and 64 characters long in Pass Phrase that users will use to connect to the wireless network. 5. Enter interval time between 60 and 2147483647s in Unicast Key Update Interval [Optional]; 86400 is default setting 6. E

• ALTAI A8n, 54 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 4.2.13. Advanced Settings on Radio Interface A8n (ac) provides advanced settings on each radio interface; these settings include data rate, AirFi, Tx/Rx Stream settings … etc. Caution: - Inappropriate configuration may bring negative impact on the network performance - It is not suggested to change the parameters in Advanced Radio Settings unless you are experienced administrators. - Default setting is recommended Figure 57 – Radio 0’s Advanced Settings

• ALTAI A8n, 42 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 4.1.5. Configure Radio Interface as Repeater Radio 0 – 2.4GHz Radio Repeater radio mode is not available in Radio 0(2.4G) interface. Radio 1 – 5GHz Radio Radio General Configuration Figure 40 – Radio 1 General Setting of Repeater 1. Go to Configuration > Wireless > Radio1(5G) > General; 2. Select Enable Radio checkbox to enable radio interface 3. Select Repeater in Radio Mode 4. Change the following settings: Country Code – Select an

• 75 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Radio0 (2.4G) Figure 83 – Radio 0 Status MAC – MAC address of Radio 0 interface Channel – indicate operating frequency (channel) of Radio 0 Wireless Mode – indicate 802.11 standards that Radio 0 operates Noise Level – indi

• ALTAI A8n, 3 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 2.2. Connect to Your Altai Access Point 1. Connect your laptop to Data In port on the PoE Injector provided in the Altai’s package using Ethernet cable 2. Connect the Ethernet port of AP to Data & Power Out port on the PoE Injector provided in the Altai’s package using Ethernet cable. 3. Connect the power cord to the power port on the PoE Injector. Connect the other end of the power cord to a power outlet. Figure 1 – A8n (ac) Connect

• 86 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 7.3. Diagnosis 7.3.1. Ping Test Network administrator and engineer test the reachability of a host and measures the round-trip time between A8n (ac) and the host over an Internet Protocol (IP) network by using ping tool. Figure 95 – Ping Test 7.3.2.

• ALTAI A8n, 78 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 6.3.2. Status > Radio0(2.4G) > Association List This information is available on AP mode and Repeater mode only. Figure 86 – Radio 0 Association List WAN It shows the current status of all operating WLAN on Radio 0 interface. The information includes WLAN ID, SSID, MAC Address, authentication mode, cipher mode, number of associated clients, instant throughput, and total traffic of each operating WLAN respectively. Station List It shows the real time status of first 50 ass

• 77 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Radio Settings Radio Status – indicate the current status of Radio 0 interface MAC – MAC address of Radio 0 interface Radio Channel - indicate operating frequency (channel) of Radio 0 Wireless Mode – indicate 802.11 standards that Radio 0

• ALTAI A8n, vi Altai Technologies Ltd. All rights reserved Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Radio 1 – 5GHz Radio ............................................................................................................... 42 Radio General Configuration ............................................................................................... 42 Repeater WLAN Configuration ............................................................................................ 43 4.2. ADVANCE CONFIGURATIONS ......................................................................................... 44 4.2.1.

• ALTAI A8n, 39 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Configure Station to associate network with Shared Key authentication Figure 37 - Shared Key Authentication of Station 1. Go to Configuration > Wireless > Radio1(5G) > Station > WLAN Security 2. Select Shared in Authentication Mode 3. Select WEP in Cipher Mode 4. Select key number 1 – 4 in Default WEP Key 5. Select Key Entry Method Ascii Text key is encoded as ASCII ch

• ALTAI A8n, 74 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 6.2.4. Interfaces Interfaces provide the real time status of all interfaces on the A8n (ac) device. Figure 81 – Status of all available interfaces Ethernet (eth0) Figure 82 – Ethernet 0 Status MAC – MAC address of Ethernet 0 interface Link – indicate the status and operating mode of Ethernet 0 Transmit – indicate the traffic and instant throughput of transmission on Ethernet 0 Receive – indicate the traffic and

• ALTAI A8n, 87 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Figure 96 – Traceroute Test How to perform traceroute test 1. Go to Tools > Diagnosis > traceroute 2. Type target IP address / host name in Destination IP Address/Host Name 3. [Optional] Click Enable Resolve IP addresses checkbox to enable IP address to domain name translation 4. [Optional] Specify timeout interval between 1s and 100s in Timeout for traceroute test 5. [Optional] Specify TTL value between 1 and 100 in Pings Per

• ALTAI A8n, 73 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved IPv6 Default Gateway – indicate a node that helps device to another network. IPv6 DNS Server - indicate a node that provides DNS service for the device Gateway Mode Figure 80 – Network Status in Gateway Mode WAN IPv4 DHCP Client – indicate whether device’s IP address is assigned by DHCP server or not IPv4 Address – Current IPv4 address of device on WAN IPv4 Subnet Mask – indicate the subnetwork device belongs to IPv4 Default Gateway – indicate a node that helps device to another network. IPv4 DNS Server

• ALTAI A8n, 63 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 3. Type a new password in Password 4. Type a new password again in Confirm Password 5. Click Submit Note: - Please login as admin for modifying password 5.1.2. RADIUS authentication Enable RADIUS authentication in A8n (ac) products 1. Go to Administration > User Admin > Login Authentication Setting 2. Select RADIUS authentication or RADIUS + Local authentication in Authentication Type 3. Select suitable authentication in Authentication Mode; you can select: PAP EAP 4. Select suitable encryption in Encryption Algorithm; you can sel

• ALTAI A8n, 47 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 4.2.6. Configure AP as IP Gateway Figure 46 – Gateway Settings 1. Go to Configuration > Network > General 2. Select Gateway in Network Setting 3. Change the followings on WAN setting: Internet Connection Type – Set AP as a client with fixed IP address or DCHP client: Static Stand for Static IP addressing; AP will not update its IP address a

• ALTAI A8n, 53 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 6. Select suitable protocol in Protocol Type: TCP & UDP TCP UDP 7. Type in port number of AP in Global Port 8. Type in description in Description [Optional] 9. Click Submit 10. Click Save & Apply 4.2.12. Safe Mode Safe Mode is for detecting the backhaul link integrity. If the AP loses its backhaul connectivity, it forces the clients to re-associate with another AP by ch

• ALTAI A8n, 4 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 2.3. Login the AP (via Ethernet) 1. Verify the AP’s Power LED is steady green 2. Open a Web browser from the computer. 3. Type http://192.168.1.222 in the address bar or location bar (see Figure 3). 4. Type admin (default username) in Username 5. Type admin (default password) in Password 6. Click Login Figure 3 – A8n (ac) Series Product’s Login Page 2.4. Secondary IP Address of A8n (ac) Series Products The default IP

• ALTAI A8n, 71 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 6.2. Status > Overview Figure 76 – A8n (ac) device’s status overview Status overview provides vital information on the device’s status. Information includes system status, thin AP status, network status, and interfaces status. 6.2.1. System status System status provides basic information and real time status of device. Figure 77 – System Statu

• ALTAI A8n, 84 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved Sector X AP List Tab– displays information scanned WLAN in sector 0 – 4. X is the sector number. Information includes SSID, BSSID, authentication Mode, cipher, channel, rate in kbps, and received SNR (dB) 7.1.1. Perform channel scan on 2.4G radio 1. Go to Tools > Channel Scan > Radio 0 (2.4G) 2. [Optional] Provide channel scan interval from 100ms to 1000ms in Duration 3. Clic

• 11 Altai A8n (ac) Series Super WiFi Base Station Configuration Guide Altai Technologies Ltd. All rights reserved 3.3. Configure as Repeater 1. Go to Configuration > Network > General > WAN Settings 2. Select suitable internet connection type (DHCP / Static) 3. Configure IP Address on the device (for static internet connection type only)

More Instructions:

ALTAI A8n Installation manual 17-11-2022 34

DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• TP-Link AC2600 (2 pages) Quick Installation GuideAC2600 Wireless Dual Band Gigabit Router Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s Internet port, then follow steps 5 and 6 to complete the hardware connection.7106506185 REV1. …

• THOMSON TG585 (20 pages) ΟδηγόςΕγκατάστασηςSelf InstallationGuidewww.cytanet.com.cy 8000 80 80Ευρυζωνικές Υπηρεσίες ∆ιαδικτύουBroadboand Internet Services …

• RACOM Midge MG102 (6 pages) Quick Start – M!DGE / MG102 Wireless Router11/16/20111. WelcomeThank you for buying M!DGE / MG102 Wireless Router from RACOM.Please read this Quick Start Guide carefully since it contains important security notes (section 2) andcompliance information (section 5). In addition, this guide provides you with essential information forthe installation, configura …

• Panasonic KX-NCP500 (16 pages) Model No. KX-NCP500KX-NCP1000Pure IP-PBXQuick Reference Guide forCommunication AssistantDocument Version: 2008-09Thank you for purchasing a Panasonic Pure IP-PBX.Please read this manual carefully before using this product and save this manual for future use.KX-NCP500/KX-NCP1000: PBMPR Software File Version 1.0000 or later …

• Multitech MultiConnect rCell 100 Series (21 pages) Configuring the MultiTech rCell 100 Series cellular modems for use with TopView® SMS Notification Updated: June 3, 2020 View the latest version of this document: If this document is available through your TopView installation or was previously downloaded you can view the latest version here. Recent document updates: • June 3, 2020 o Firmware 5.2.1 rele …

• StarTech.com AP150WN1X1U (2 pages) Quick Start GuideManual Revision: 01/27/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startech.comI T: Guida per l'uso - it.startech.comNL: Gebruiksaanwijzing - nl.startech.comP T: Guia do usuário - pt.startech.c …

Comments, Questions and Opinions: