Artec Light Tower Assembly Instructions Manual

Text of Artec Light Tower User Guide:

• 02 Light Tower Contents Studuino Unit × 1 × 1 USB Cable Sensor Connecting Cable (three-wire 15 cm) × 1 × 8 Half C (light aqua) × 29 Basic Cube (white) × 8 Basic Cube (clear) × 4 Half B (blue) × 3 Battery Box Buzzer Light sensor LED (blue)LED (green) LED (white)LED (red) Sound sensor Touch sensor × 1 × 1 × 1 × 1 × 1 × 1 × 1 × 1 Half D (light blue) × 4 Buzzer Red Sound Sensor Lig

• Artec Light Tower, Assembly Instruction Labels Shows an image of the completely assembled item. Shows the parts needed for assembly. Indicates the number of parts needed for assembly. × 1 Biped Walking Robot Indicates when the direction of a component must be changed for assembly. Indicates tips or warning when building a specific item. 03

• 05 Sensor Connecting Cable Sensor side Circuit board side Sound Sensor 1. 2. Light Tower × 12 × 3 × 1 × 2 × 1 Assembling the Base GrayGray Black Black Make sure the cables are inserted correctly! ①

• Artec Light Tower, 17 A3 A2 Blue White Light Tower ③ ④ Connect the cable from the blue LED to and the cable from the white LED to . A2 A3 A1 A0 Red Green Connect the cable from the green LED to　　and the cable from the red LED to . A1 A0 Make sure the cables are inserted correctly! Make sure the cables are inserted correctly!

• Artec Light Tower, 18 A6 A5A7 Buzzer Sound sensor Light sensor Light Tower ⑤ ⑥ Connect the cable from the buzzer to 　, the cable from the light sensor to 　 , and the cable from the sound sensor to 　. A5 A6 A7 Make sure the cables are inserted correctly!

• Artec Light Tower, Light Tower 22 Operating Your Light Tower ⑤ Install the software from the URL below to setup the Studuino Programming Environment. ★ Proceed to Step 1 when software installation is complete. Open the downloaded file. http://www.artec-kk.co.jp/studuino/ Download the program file LightTower.ipd from the URL below in the ArtecRobo section. ② Connect the USB cable to the PC and the Studuino unit. Refer to 1.3. About Studuino in the Studuino Programming Environment Manual for more details. ① Remove the USB cable from the Studuino unit. http://www.artec-kk.co.jp/artecrobo/ ③ ④ Transfer the program to the Studuino unit by clicking the Transfer button .

• Artec Light Tower, Light Tower 23 Operating Your Light Tower The LEDs will shine for five seconds in response to sound. They will also shine if your room becomes dark. ① Making contact with the touch sensor will make the LEDs shine and the buzzer will play a sound. ②

• Artec Light Tower, Light Tower 24 Sensor Calibration Some sensors may not function properly after you run the program for the first time. If the sensors are malfunctioning, calibrate the sensor settings. Drag the mouse left or right to adjust the range settings. Refer to the Sensor Condition Icon sections in 4.4. The Attribute Field of the Studuino Programming Environment Manual for more details. Click the Submenu 1 tab to calibrate the sensors and you will see a box to adjust the range settings.

Related Products and Documents (Toy):

Comparable Devices:

Similar Resources:

• Madcow Rocketry mini AGM 33 PIKE FIBERGLASS KIT (3 pages) Specications: Length: 28.5” Diameter 1.6” Weight:12oz Recovery: 18” Nylon Chute Motor Mount: 29mm Fins: 6 - 1/16” G10 Estimated CP: 21.5” from nose tipParts List 1. (1) Fiberglass nose cone 2. (1) Fiberglass nose cone coupler 3. (1) Pre-slotted body tube 4. (2) G10 centering rings 5. (1) 29mm motor tube 6. (6)G10ns …

• roco 73116 (10 pages) BedienungsanleitungOperating ManualMode d’emploiInhaltsverzeichnisTable of ContentsTable des matièresFBitte bewahren Sie die Verpackung des Modells sorgfältig auf. Beim Abstellen des Modells bietet sie den besten Schutz. Ein mit beigeleg-ten Zurüstteilen aufgerüstetes Modell passt nur bedingt wieder in die Originalverpackung hinein, da diese aus Grün …

• ARISTO-CRAFT TRAINS LIVE STEAM MIKADO 2-8-2 (24 pages) 09/10//05 NEWLIVE STEAM MIKADO 2-8-2INSTRUCTION MANUAL ART-84100-01ARISTO-CRAFT TRAINS / Polk’s Modelcraft Hobbies, Inc.698 South 21st Street, Irvington, NJ 07111 USATel: (973) 351-9800 Fax: (973) 351-9700http://www. aristocraft.com e-mail: [email protected] …

• Estes Jetliner (2 pages) Part/ Piezas/ PièceQty/ Ctd./ QtéDescription/ Descripción/ DescriptionPart Number/ Número de la Pieza/ Nº de pièceA 1 Engine mount tube / Tubo del soporte del motor / Tube du bâti moteur 030304B 1 Engine hook / Gancho del motor / Crochet de moteur 035023C 1 Yellow engine block / Bloque amarillo para el motor / Butée de moteur jaune 030222-4D 1Notche …

• Great Central Models Robinson GCR Class 8B Atlantic LNER C4 (42 pages) Page 1 GCR Class 8BPage 1 GCR Class 8BGreat Central ModelsRobinson GCR Class 8B Atlantic(LNER C4)Version 1.2 February 2013Assembly Instructions Revised July 2014Catalogue #GCM005This kit is optimised for P4 and EM standards. The kit was designed by “Great Central Models” as part of anexpanding range of Great Central Railway locomotives.Great Central Mode …

• Lionel Scout Set (24 pages) 73-0183-2506/13CAUTION—ELECTRIC TOYNOT RECOMMENDED FOR CHILDREN UNDER EIGHT YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. TRANSFORMER RATINGS—INPUT: 120-240 VAC 50/60 HZ. OUTPUT: 18 VDC; 2000 MA.Lionel Scout SetRemote ControlReady-To-Run Set Owner’s ManualLionel Scout SetR …

Comments, Questions and Opinions: