Manualios.com

ASUSTeK COMPUTER ROG Rapture GT-AC5300 Operation & User’s Manual

  • ROG Rapture GT-AC5300 Wireless Router
  • maEeAPKBMiFWQ
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 152

ASUSTeK COMPUTER ROG Rapture GT-AC5300 Manual Online:

4.9, 623 votes
ASUSTeK COMPUTER ROG Rapture GT-AC5300 User Manual
ASUSTeK COMPUTER ROG Rapture GT-AC5300 User Guide
ASUSTeK COMPUTER ROG Rapture GT-AC5300 Online Manual

Text of ASUSTeK COMPUTER ROG Rapture GT-AC5300 User Guide:

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 67 5. In the IP Pool Ending Address field, key in the ending IP address. 6. In the Lease Time field, specify in seconds when an assigned IP address will expire. Once it reaches this time limit, the DHCP server will then assign a new IP address. NOTES: • We recommend that you use an IP address format of 192.168.1.xxx (where xxx can be any number between 2 and 254) when specifying an IP address range. • AnIPPoolStartingAddressshouldnotbegreaterthantheIPPool Ending Address. 7. In the DNS and Server Settings section, key in your DNS Server and WINS Server IP address if needed. 8. Your wireless router can also manually assign IP ad

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 63 4.3 Creating a Guest Network The Guest Network provides temporary visitors with Internet connectivity via access to separate SSIDs or networks without providing access to your private network. NOTE: GT-AC5300 supports up to nine SSIDs (three 2.4GHz, three 5GHz-1 and three 5GHz-2). To create a guest network: 1. From the navigation panel, go to Advanced Settings > Guest Network. 2. On the Guest Network screen, select 2.4Ghz or 5Ghz frequency band for the guest network that you want to create. 3. Click Enable.

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 130 Cannot access Web GUI A. Disable the proxy server, if enabled. Windows ® 7 1. Click Start > Internet Explorer to launch the browser. 2. Click Tools > Internet options > Connections tab > LAN settings. Before confi guring your wireless router, do the steps described in this section for your host computer and network clients. 3. From the Local Area Network (LAN) Settings screen, untick Use a proxy server for your LAN. 4. Click OK when done.

  • 61 • DTIM Interval: DTIM (Delivery Traffic Indication Message) Interval or Data Beacon Rate is the time interval before a signal is sent to a wireless device in sleep mode indicating that a data packet is awaiting delivery. The default value is three milliseconds. • Beacon Interval: Beacon Interval is the time between one DTIM and the next. The default value is 100 mil

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 38 3.7 Game Radar Game Radar is a diagnostic tool that helps you identify the connection quality of servers for specific games. To use Game Radar: 1. From the navigation panel, go to General > Game Radar and select a game from the game list.

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 92 4.7.1 Cloud Disk To create a cloud disk: 1. Insert a USB storage device into the wireless router. 2. Turn on Cloud Disk. 3. Go to https://router.asus.com and enter the router login account and password. For better user experience, we recommend that you use Google Chrome or Firefox.

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 16 3. The wireless router automatically detects if your ISP connection type is Dynamic IP, PPPoE, PPTP and L2TP. Key in the necessary information for your ISP connection type. IMPORTANT! Obtain the necessary information from your ISP about the Internet connection type. for Automatic IP (DHCP) for PPPoE, PPTP and L2TP NOTES: • Theauto-detectionofyourISPconnectiontypetakesplacewhen you configure the wireless router for the first time or when your wireless router is reset to its default settings. • IfQISfailedtodetectyourInternetconnectiontype,clickSkip to manual setting

  • 30 Time Scheduling Time Scheduling allows you to set the time limit for a client’s network usage. NOTE: Ensure that your system time is synchronized with the NTP server. To confi gure Time Scheduling: 1. From the navigation panel, go to General >Game IPS > Parental Controls > Time Scheduling. 2. From the Enable Time Scheduling pane, click ON. 3. From the Clients Name colu

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 142 running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical a

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 68 4.4.3 Route If your network makes use of more than one wireless router, you can confi gure a routing table to share the same Internet service. NOTE: We recommend that you do not change the default route settings unless you have advanced knowledge of routing tables. To confi gure the LAN Routing table: 1. From the navigation panel, go to Advanced Settings > LAN > Route tab. 2. On the Enable static routes fi eld, choose Yes. 3. On the Static Route List, enter the network information of other access points or nodes. Click the Add or Delete

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 123 6 Troubleshooting This chapter provides solutions for issues you may encounter with your router. If you encounter problems that are not mentioned in this chapter, visit the ASUS support site at: http://support.asus.com/ for more product information and contact details of ASUS Technical Support. 6.1 Basic Troubleshooting If you are having problems with your router, try these basic steps in this section before looking for further solutions. Upgrade Firmware to the latest version. 1. Launch the Web GUI. Go to Advanced

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 136 Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Safety Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31cm between the radiator and your body. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testin

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 4 Table of contents 3.5 Game Private Network ............................................................ 34 3.6 Game Profile ................................................................................ 36 3.7 Game Radar ................................................................................. 38 3.8 WiFi Radar .................................................................................... 40 3.8.1 WiFi Site Survey ......................................................................41 3.8.2 Wireless Channel Statistics ........................................

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 125 6.2 Frequently Asked Questions (FAQs) I cannot access the router GUI using a web browser • Ifyourcomputeriswired,checktheEthernetcableconnection and LED status as described in the previous section. • Ensurethatyouareusingthecorrectlogininformation.The default factory login name and password is “admin/admin”. Ensure that the Caps Lock key is disabled when you enter the login information. • Deletethecookiesand�

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 54 NOTE: WPS supports authentication using Open System, WPA- Personal, and WPA2-Personal. WPS does not support a wireless network that uses a Shared Key, WPA-Enterprise, WPA2-Enterprise, and RADIUS encryption method. 3. In the WPS Method field, select Push Button or Client PIN code. If you select Push Button, go to step 4. If you select Client PIN code, go to step 5. 4. To set up WPS using the router’s WPS button, follow these steps: a. Click Start or press the WPS button found at the rear of the wireless router. b. Press the WPS button on your wireless device. This is normally identified by the WPS lo

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 147 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND

  • 129 How to restore the system to its default settings? • GotoAdministration > Restore/Save/Upload Setting, and click Restore. The following are the factory default settings: User Name: admin Password: admin Enable DHCP: Yes (if WAN cable is plugged in) IP address: http://router.asus.com (or 192.168.1.1) Domain Name: (Blank) Subnet Mask: 255.

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 36 3.6 Game Profile When playing PC or console games, there may be some connection issues due to the ISP or router settings in your environment such as NAT and port blocks. Game Profile helps ensure that GT-AC5300 is not blocking the game connection. To use Game Profile: 1. From the navigation panel, go to General > Game Profile and tick Yes to enable port forwarding. 2. Choose a game from Famous Game List, which will be updated from time to time.

  • 94 4.7.2 Smart Access The Smart Access function allows you to easily access your home network via your router’s domain name. NOTES: • YoucancreateadomainnameforyourrouterwithASUSDDNS. For more details, refer to section 4.5.6 DDNS. • Bydefault,AiCloudprovidesasecureHTTPSconnection.Keyin https://[yourASUSDD

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 66 4.4.2 DHCP Server Your wireless router uses DHCP to assign IP addresses automatically on your network. You can specify the IP address range and lease time for the clients on your network. To confi gure the DHCP server: 1. From the navigation panel, go to Advanced Settings > LAN > DHCP Server tab. 2. In the Enable the DHCP Server fi eld, tick Yes. 3. In the Domain Name text box, enter a domain name for the wireless router. 4. In the IP Pool Starting Address fi eld, key in the starting IP address.

  • 84 4. Create your domain name via the ASUS DDNS services, read the Terms of Service and then select I will use the service and accept the Terms of service and key in your domain name. When done, click Next. You can also select Skip ASUS DDNS settings then click Next to skip the DDNS setting. 5. Click Finish to complete the setting. 6. To access the FTP site that you created, launch a w

  • ASUSTeK COMPUTER ROG Rapture GT-AC5300, 58 4.2.5 RADIUS Setting RADIUS (Remote Authentication Dial In User Service) Setting provides an extra layer of security when you choose WPA- Enterprise, WPA2-Enterprise, or Radius with 802.1x as your Authentication Mode. To set up wireless RADIUS settings: 1. Ensure that the wireless router’s authentication mode is set to WPA-Enterprise or WPA2-Enterprise. NOTE: Please refer to section 4.2.1 General for confi guring your wireless router’s Authentication Mode. 2. From the navigation panel, go to Advanced Settings > Wireless > RADIUS Setting. 3. Select the frequency band. 4. In the Server IP Address fi eld, key in your RADIUS s

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Barco R9001180 Owner's manual barco/r9001180-319.pdf 17 Jun 2023 55 2.8 Mb
2 Lenovo ThinkStation S20 Operation & user’s manual lenovo/thinkstation-s20-RYF.pdf 20 Sep 2023 72
3 Allied Telesis AT-iMG626MOD Datasheet allied-telesis/at-img626mod-K44.pdf 11 Jul 2022 3 0.1 Mb
4 Philips 170V8FB Service manual philips/170v8fb-944.pdf 01 Apr 2023 113
5 LG 60PV450C Brochure & specs lg/60pv450c-ULD.pdf 25 Jan 2023 4
6 Yamaha E25B Owner's manual yamaha/e25b-G5I.pdf 12 Dec 2022 74

Similar Resources:

  • Rayson Technology

    WFM-210

    (15 pages)
    aVVUUG 1 IEEE 802.11 b/g/n 2.4GHz 1T1R User ManualiCOM Smart WiFi Module …
  • Wemos

    D1 Mini V3

    (12 pages)
    Wemos D1 mini is an ESP8266 board that’s interesting thanks to its size, its low price ($4), micro USB power, its shields, and a documentation that looks fairly good. The board can be programmed with Arduino or Lua, and supports both serial and OTA programming. I’ve decided to give it a try and bought the board together with two temperature shields, a re …
  • sparkfun

    CC3000

    (18 pages)
    CC3000 Hookup Guide  IntroductionIf you need to add wireless networking (WiFi) to a project, then the CC3000 could be your ticket. Two flavors are available: the CC3000 WiFi Arduino Shield, and the CC3000 WiFi Breakout Board. What sets the CC3000 apart from others (such as the WiFly Shield) is its ability to associate to a WiFi access point (AP) using …
  • Apollo

    VioNet 3000 series

    (5 pages)
    03/28/209711:07FAX8474844116ACCOUSAAPOLLO®TRANSMISSIVEOVERHEADPROJECTORETROPROJECTEUR TRANSMISSIFRETROPROYECTORTRANSMISIVOOPERATINGINSTRUCTIONS/NOTICED'EMPLOII',:<INSTRUCCIONESDEOPERAOON,';;;!..i,i;;Thank you for purchasingourOverheadProjector,Pleosereadthese instruclions carefully before use.Marti d'ovoirachetsnotre retroprojecteur. …
  • TeleWell

    TW-EAV510 AC v2

    (113 pages)
    1 TW-EAV510 AC v2 3G/4G/LTE ADSL2+/Fibre Broadband Router Wireless 802.11 b/g/n ac 2,4 GHz / 5 GHz VPN User Manual Copyright © TeleWell Oy …
  • TP-Link

    Archer CR500

    (2 pages)
    Quick Installation GuideAC1200 Wireless Dual Band DOCSIS 3.0Cable Modem Router1. Keep the power on at all times during this process.2. If the Internet LED does not turn solid after about 1 minute, call your ISP’s customer service. 3. If the wireless LED is o, press the WiFi ON/OFF button on the back panel, then check the LEDs again.Connect t …

Comments, Questions and Opinions: