avantec DT910N Operation & User’s Manual
|
9 5.3 View the Number of an Entry 1. Press key during standby mode to enter phonebook, the first entry name is displayed. 2. Press / key to select the entry. 3. Press key, the phone number is displayed. 4. Press key to go back to standby screen. 5.4 Edit an Entry 1. Press key during standby mode to enter phonebook, the first entry name
avantec DT910N, 6 4. Basic Telephone Operation 4.1 Making Calls Direct Dial 1. Press first to get a line and you will hear a dial tone. 2. Enter the phone number. Pre-dial 1. Enter the phone number during standby mode. (Use key to edit any wrong entry.) 2. Press to dial out the number. During a call, you may press key to activate the speakerphone feature, the icon will be turned on. Press key again to switch back to the earpiece mode, the icon will be turned off. You may also use the / keys to adju
avantec DT910N, 11 7. Handset SETUP 7.1 Handset Tone 7.1.1 Ring Volume (External Call) 1. In standby mode, press key to enter the handset menu. 2. Press key until “HS SETUP” is displayed. 3. Press key, “HANDSET TONE” is displayed. 4. Press key, “RING VOLUME” is displayed. 5. Press key to enter the menu. 6. Press / key to adjust the desired volume level (off, 1-5). 7. Press key to save the new value. 8. Press key to go back to standby screen. Note: When the Ring volume is set to “OFF”, icon will be turned on indicating that the ringer set to non-distribute/ silent mode. 7.1.2 Ring Melody There are 12 ring melodies available.
avantec DT910N, 20 8.4.2 Recall Time (Flash Time) Use this option to select the correct recall (flash) time for your system/country setting. 1. In standby mode, press key to enter the handset menu. 2. Press key until “BS SETUP” is displayed. 3. Press key, then press key until “ADVANCE SET” is displayed. 4. Press key, and enter PIN code (default as “0000”). 5. Press key until “RECALL TIME” is displayed. 6. Press key, then use / key to select the desired Recall Time. 7. Press key to save the change. 8. Press key to go back to standby screen. 8.4.3 Unregister Use this option to delete
avantec DT910N, 10 6. Clock / Alarm 6.1 Real Time Clock 6.1.1 Manual Setting 1. In standby mode, press key to enter the handset menu. 2. Press key until “CLOCK/ALARM” is displayed. 3. Press key, “DATE & TIME” is displayed. 4. Press key to enter the date and time setting screen. 5. Press / key to enter the current date and time in 12H format. 6. Press key to save the new setting. 7. Press key to go back to standby screen. 6.1.2 Automatic Setting Provided that this service is enabled by the network, the time clock will be automatically updated upon
25 10. Warranty This warranty does not cover, or may be voided by the followings: 1. Any damage resulting from abuse or misuse (i.e. liquid spills, abuse, or customer’s modification (warranty label broken) of the telephone). 2. Any damage caused by failure to follow operating or installation instructions provided with the telephone. 3. Any damage resulting from improper connection
avantec DT910N, 8 5. Phonebook Up to 50 entries (name and number) can be stored in the phonebook. To access the phonebook from standby mode, 1. Press short-cut key during standby mode. (When accessed to the phonebook, the first entry is displayed. Entries are listed alphabetically.) 2. Use the / key to browse the phonebook and pick a record that you wish to call. It is also possible to make an alphabetical search (quick search) in the directory: 1. Once in the phonebook list, enter the initial letter of the name, the first name which
avantec DT910N, 17 8.2 Register / Subscribe a New Handset (Multiple Handset Scenario) It is possible to subscribe additional handsets to the same base unit. A maximum of 6 handsets can be supported by the system. 1. Press and hold the page button on base station until the LED on base station turns yellow. 2. On the handset, in standby mode, press key to enter the handset menu. 3. Press key until “BS SETUP” is displayed. 4. Press key, then press key until “REGISTER” is displayed. 5. Press key, “BASE 1” is displayed. 6. Press / key t
avantec DT910N, 12 7.1.3 Intercom Melody 1. In standby mode, press key to enter the handset menu. 2. Press key until “HS SETUP” is displayed. 3. Press key, “HANDSET TONE” is displayed. 4. Press key, then press key until “INTERCOM” is displayed. 5. Press key, “Melody: x” is displayed (x is the number of current melody). 6. Press / key to select the desired melody. 7. Press key to save the new melody. 8. Press key to go back to standby screen. 7.1.4 Key Tone 1
avantec DT910N, 15 7.5 Language There are 10 languages available. English German French Italian Spanish Portuguese Dutch Turkish Greek Danish 7.5.1 Change the Handset Display Language 1. In standby mode, Press key to enter the handset menu. 2. Press key until “HS SETUP” is displayed. 3. Press key, then press key until “LANGUAGE” is displayed. 4. Press key, the current language is displayed. 5. Press /
avantec DT910N, 7 After entering the list, press the / key to scroll through the entries and pick a number that you wish to call, then press key twice to confirm. The selected number will be dialed out automatically. 4.4 Making Internal Calls (Intercom) If you have two or more handsets registered to a base station, it’s possible to make internal calls between handsets. 1. In standby mode, press key to enter the handset menu, “INTERCOM” is displayed. 2. Press key to confirm. 3. Press / key to select the handset number that you wish to call. 4. Press key to dial out. Note: The handset number is normally sho
avantec DT910N, 16 Copy this IP address and enter it in a Web Browser. To change the DHCP setting on the handset: 1. Press key to enter the handset menu. 2. Press key until “IP MENU” is displayed. 3. Press key, “IP INFO” is displayed. 4. Press key, “USE DHCP” is displayed 5. Press key: a. Select “YES” for DHCP b. Select “NO” for Fixed-IP 6. Press key to confirm 7. Exit the menu, the Base Station automatically reboots Web Portal For ease of data entry and
avantec DT910N, 13 7.1.6 Range If the RF signal strength is weak during a call (the handset is far away from the base station), the handset will play a WARNING Tone in the earpiece to indicate that the RF range condition is bad. 1. In standby mode, press key to enter the handset menu. 2. Press key until “HS SETUP” is displayed. 3. Press key, “HANDSET TONE” is displayed. 4. Press key, then press key until “RANGE” is displayed. 5. Press key, the current setting is displayed (ON or OFF). 6. Use / key to switch between ON and OFF. 7. Press key to c
avantec DT910N, 24 9.2.1 Features The following details are available in the call list. The caller number: 24 digits The caller name: 12 characters Date and hour of the call 9.2.2 Dial from calls list 1. In standby mode, press key to access the call list. 2. Press / key to select the number you want to dial. 3. Press key two times to call this number. 9.2.3 Save an entry to the phonebook from call list 1. Press key from idle mode to enter call list, the caller number or name (if available) is displayed. 2. Press / key until you have reached the entry you want to save. 3. Press key, �
avantec DT910N, 4 2. Product Description Main Features Dot matrix LCD display with backlight Phonebook capacity 50 entries (with 24 digits and name of 12 characters) Caller ID list: 50 entries Redial log: 10 entries Caller ID: type 1 and type 2 Handset polyphonic ring melodies: 12 Languages: 10 (English, German, French, Italian, Spanish, Portuguese, Dutch, Turkish, Greek, Danish) Number of base per handset: 4 Number of handset per base: 6 Key Layout and Definitions 1. Earpiece 2. LCD display 3. Scroll Up / Phonebook 4.
avantec DT910N, 22 9. Other Features 9.1 Last Number Redial Once you have dialed calls, phone numbers are stored independently in the redial list on each handset. If a call is made when the redial list is full then the oldest entry is replaced. When first accessed to the list, the most recent outgoing call is displayed. Pressing KEY will move chronologically backwards through the list, i.e. from the most recent to the oldest outgoing call. Pressing KEY will move to the forward chronologica
23 9.2 Received and missed call lists When a call is received, it is automatically stored in the Call List of the handset. Up to 50 entries can be stored in the Call List. If a call is received when the list is full then the oldest entry will be replaced. All missed calls are stored in the Call List as well. To view the Call List: 1. Press key from
avantec DT910N, 5 3. Installation 1. Connect the Ethernet patch cord, one side into the PoE switch / PoE supply, the other to the base station socket. 2. The base station automatically power up. 3. The red LED on the base station goes up to indicate that the VoIP DECT enters the ready state. 4. Open the handset’s battery door and insert the rechargeable pack (supplied) to the handset, ensuring correct polarity before inserting (Fig. 1) Replace the battery door. After approx. 3 seconds, text will come up on the LCD screen ind
avantec DT910N, 3 1. Safety Instructions 1. Please read all the instructions of this manual before using this product. 2. Observe all the instructions marked on this product. 3. Install this product on a stable surface and to avoid anyone from stepping over the telephone line. 4. Do not fix the AC power supply cord to building surfaces with metal fittings. 5. This product should be operated only from the type of power source indicated on the product. If you are not sure of the type of power supply to your home, consult your local
21 8.4.4 New PIN Use this option to modify the PIN code. 1. In standby mode, press key to enter the handset menu. 2. Press key until “BS SETUP” is displayed. 3. Press key, then press key until “ADVANCE SET” is displayed. 4. Press key, and enter PIN code (default as “0000”). 5. Press key until “NEW PIN” is displayed. 6. Press
avantec DT910N, 19 8.3 Select a Base (Multiple Base Scenario) In case a handset is registered to more than one base station, you may use this option to select between multiple base stations. (A handset can register to a maximum of 4 base stations) 1. In standby mode, press key to enter the handset menu. 2. Press key until “BS SETUP” is displayed. 3. Press key, then press key until “SEL BASE” is displayed. 4. Press key, then use key to select the desired base unit. 5. Pr
avantec DT910N, 2 CONTENTS 1. Safety Instructions ............................................................................................................ 3 2. Product Description ........................................................................................................ 4 3. Installation ......................................................................................................................... 5 4. Basic Telephone Operation ........................................................................................... 6 4.1 Making Calls ......................................................
Yealink CP969 IP Phone Administrator's manual
CP969 |
Siemens Gigaset SL400A IP Phone Operation & user’s manual
Gigaset SL400A |
Yealink SIP-T32G IP Phone Operation & user’s manual
SIP-T32G |
Panasonic KX-NT321-B IP Phone Quick reference manual
KX-NT321-B |
avantec PH658N IP Phone Operation & user’s manual
PH658N |
Samsung PDP-TELEVISION IP Phone Operation & user’s manual
PDP-TELEVISION |
BELGACOM IDS 310 IP Phone Operation & user’s manual
IDS 310 |
Aastra Clearspan 6739i IP Phone Operation & user’s manual
Clearspan 6739i |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Polycom | QSX | Quick start | polycom/qsx-K46.pdf | 22 Jul 2023 | 4 | |
2 | Memorex | KA2335 | Instruction manual | memorex/ka2335-XP9.pdf | 30 Jan 2023 | 12 | |
3 | Winmate | S430T series | Operation & user’s manual | winmate/s430t-series-245.pdf | 21 Feb 2024 | 21 | |
4 | Hasbro | Dream Life Superstar | Operation & user’s manual | hasbro/dream-life-superstar-7N7.pdf | 13 Mar 2024 | 10 | 3.79 Mb |
5 | Skil | 9225 | Parts list | skil/9225-ULL.pdf | 02 Sep 2023 | 1 | |
6 | Wacker Neuson | BPU 3050A | Operator's manual | wacker-neuson/bpu-3050a-CH9.pdf | 23 May 2023 | 30 |
Cisco
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)Text Part Number: OL-15483-01
…
CP-7942G(210 pages) |
Siemens
Communication for the open mindedSiemens Enterprise Communicationswww.siemens-enterprise.comDocumentationHiPath 8000OpenStage 40Quick Reference Guideoi.book Seite 1 Dienstag, 19. Juli 2011 12:39 12
…
HiPath 8000(7 pages) |
Linksys
DRAFT © 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2) 1 Linksys, Inc. SPA941 Administration Guide October 2005 Version 0.1 (DRAFT)
…
SPA-941(96 pages) |
Cisco
Sede nas AméricasCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706EUAhttp://www.cisco.comTel: +1 408 526-4000+1 800 553-NETS (6387)Fax: +1 408 527-0883Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco and/or its affiliates in the United States and certain other countries. All othe …
UNIFIED 6911(1 pages) |
AudioCodes
AudioCodes C450HD IP Phone with Microsoft® Skype™ for Business Quick Guide 1. Before Installing Congratulations on purchasing your AudioCodes C450HD IP Phone! Note: Skype for Business (SfB) also applies to Lync™. Before setup, make sure the following items are included in the shipped box: C450HD IP Phone AC power adapter (option …
C450HD(11 pages) |
Mitel
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2009, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.QUICK REFERENCE GUIDE Mitel5610 IP DECT Cordless HandsetThe Mitel® 5610 Cordless Handset and IP DECT Stand provides 3300 ICP SIP call processing fe …
5610(6 pages) |
RCH Cash Register OndaPDF Guide (@7C4J46), RCH Onda Cash Register (Thu 10.2023) Onda, 35 |
Olivetti Printer Accessories FS-519Printer Accessories PDF Service manual FS-519, 111 |
Extron electronics Computer Hardware AXP 64 C ATExtron electronics Computer Hardware Setup manual (File: extron-electronics-axp-64-c-at-setup-manual-10, 01st Dec 2023) AXP 64 C AT, 10 |
NETGEAR Wireless Router WNMR834Wireless Router PDF Datasheet WNMR834, 2 |
Atlantic Ultraviolet Water Filtration Systems MP13AOwner's manual for Atlantic Ultraviolet MP13A Water Filtration Systems MP13A, 20 |
Eagleye Security Camera IS-AD130IG40#L8RSH7 IS-AD130IG40: Eagleye Security Camera Owner Documentation IS-AD130IG40, 2 |
Superior Indoor Fireplace SSDVST-CNM-BIndoor Fireplace #WWBK9A SSDVST-CNM-B, 28 |
Kenmore Dryer 110.8756 SeriesKenmore 110.8756 Series Guide (Doc Type: Dryer Use and care manual) 110.8756 Series, 56 |
Sirena Coffee Maker Coffee Maker#7YV96L: Coffee Maker Coffee Maker Operating instructions manual Coffee Maker, 39 |
SCK Direct, Inc. Network Hardware SmartSensorSmartSensor Installation manual - P25T62 SmartSensor, 4 |
Pride Mobility Mobility Aid Jet10UltraPride Mobility Mobility Aid Jet10Ultra Owner's manual Jet10Ultra, 44 |
NEC Telephone System SL1100User Guide: NEC SL1100 (4VMG27, Upd.03/11/2023) SL1100, 138 |