Avaya Secure Router 3120 Command Reference Manual

Text of Avaya Secure Router 3120 User Guide:

• Avaya Secure Router 3120, related commands: configure ssh_server mac configure ssh_server port configure ssh_server sftpd applies to: All modules configure ssh_server sftpd This command enables or disables sftp server subsystem functionality, which is disabled by default. syntax: ssh_server [no] sftpd example: SR/configure/ssh_server> sftpd related commands: configure ssh_server authentication configure ssh_server cipher configure ssh_server compression configure ssh_server enable configure ssh_server hostfile configure ssh_server log

• Avaya Secure Router 3120, parameter definition icmptype enable -- enable the dhcp server interface -- Enable DHCP Server on interface pool -- configure dhcps address pool pool <poolname> pool <poolname> clientid <id> pool <poolname> altvlan <id> pool <poolname> callserver <name> pool <poolname> commit pool <poolname> wireless <name> pool <pool name> default_router <ipaddress> pool <poolname> dnsserver <ipaddr> pool <poolname> tftpserver <ipaddr> pool <poolname> netbios- name-server <ipaddr> pool <poolname> doma

• Avaya Secure Router 3120, 1. SR/configure/ip/access-list Rules_01> add permit tcp 10.1.3.9/12 10.1.100.46/255.255.255.0 dport =23 flags established log on 2. SR/configure/ip/access-list Rules_02> add deny icmp 10.1.20.9/32 any icmptype 8 icmpcode 0 log on 3. SR/configure/ip/access-list Rules_03> add permit udp 10.1.10.7 any sport =12 precedence 3 tos 2 4. SR/configure/ip/access-list Rules_04> add deny ip 10.1.100.2 255.255.255.0 precedence 5 tos 1 log on The above command entries add four filtering rules to a filtering rule set (one each for the TCP, UDP, ICMP, and IP p

• Avaya Secure Router 3120, configure ipmux src_fwd_gw This command selects the default gateway for all configured bundles. This command avoids having to configure a source forwarding statement within each bundle. parameter definition gateway IP address syntax: src_fwd_gw gateway < IP address > example: SR/configure/ipmux> src_fwd_gw 100.10.10.4 applies to: All modules configure module This command accesses next-level commands for configuring interface ports. parameter definition interface_type T1, E1, T3, serial Slo

• All modules clear crypto ike This command accesses next-level commands to clear IKE information. syntax: ike example: SR/clear/crypto> ike next-level commands clear crypto ike sa applies to: All modules clear crypto ike sa This command clears either all SA entries for a specified policy or all SA entries in the IKE table. parameter definition policy-name all Clea

• Avaya Secure Router 3120, | |-- nat | | |-- pool | | | |-- range | | |-- interface | | |-- enable | | |-- reverse | | |-- default_addr | | |-- ip | | |-- trans_addr | | |-- max_ports | | |-- max_entries | | |-- timeout | | |-- unregistered | | |-- pass_thru | | |-- pass-thru-multicast | | |-- trans_mode | | |-- address | | |-- port | | |-- debug | |-- igmp | | |-- interface | | | |-- version | | | |-- query-interval | | | |-- last-member-query-interval | | | |-- last-member-query-count | | | |-- startup-query-interval |

• configure interface bundle fr mfr This command accesses next-level commands for configuring multilink frame relay operation on a Secure Router. syntax: configure interface bundle fr mfr example: SR/configure/interface/bundle/fr> mfr next-level commands configure interface bundle fr mfr ack_msg configure interface bundle fr mfr class configure interface bundle fr mfr diff_delay

• [no] period time parameter definition time The BSR message interval in seconds. Valid range is: 1— 65535. example: The following example sets the message interval to 1000 seconds: SR/configure/ip/pim/cbsr> period 1000 SR/configure/ip/pim/cbsr> applies to: All modules ip pim cbsr priority set the CBSR priority (default: 0). Use the no form of this command to set

• Avaya Secure Router 3120, next-level commands: configure module ct3 alarms thresholds user applies to: Channelized T3 configure module ct3 alarms thresholds user This command sets the alarm thresholds for Channelized T3 user statistics. Each system gathers seven types of user statistics for the Channelized T3, and you can set a different type of alarm threshold for each type of statistic. • To see the current user statistic alarm threshold settings, use the show module thresholds ct3 command. • To view the user statistic alarms in progress, use the show module alarms ct3 command. • To view the actual user statistics, use the show module userstats ct3 command. parameter definition number User statisti

• related commands: debug ip ospf flooding debug ip ospf packet debug ip ospf policy debug ip ospf spf debug ip ospf spf_timing debug ip ospf summary applies to: All modules debug ip ospf summary This command enables or disables debug messages for OSPF summarization Note: The router must be in routing mode to access this debug command. syntax: summary example: SR/debug/ip> osp

• Avaya Secure Router 3120, crypto ike policy proposal hash-algorithm Configures the IKE authentication algorithm for a given proposal. To reset the authentication algorithm to the default value, use the no form. syntax: [no] configure crypto ike policy <policy-name> <peer-address> proposal <proposal priority> hash-algorithm [md5|sha1] parameter definition md5 .Produces a 128-bit message digest. RFC 1321. sha1 Produces a 160-bit message digest. Default: sha1 example: SR> configure term SR/configure> crypto SR/crypto> ike policy ToNetSc1 100.1.1.2 SR/crypto/ike/policy>

• Avaya Secure Router 3120, | | |-- tcp-seq-number-range | | |-- mime-flood | | |-- enable-all | |-- timeout | | |-- general | | |-- service | |-- url-key-filter | |-- max-connection-limit | |-- ip-reassembly | | |-- enable | | |-- packet-size | | |-- fragment-size | | |-- fragment-count | | |-- timeout | |-- logging | | |-- vpn | | |-- attacks | | |-- policy | |-- policy | | |-- max-connection-limit | | |-- connection-rate |

• debug nat global This command accesses next-level commands to enable debug commands for global NAT. syntax: global example: SR/debug/nat> global next-level commands debug nat global debug debug nat global hash debug nat global packet applies to: All modules debug nat global debug This command enables or disables internal NAT debug messages to the management console. syntax:

• Avaya Secure Router 3120, configure interface bundle mhu send_router_info.........................................................................................276 configure interface bundle mhu set_timeout.................................................................................................277 configure interface bundle mlppp..................................................................................................................278 configure interface bundle nat...................................................................................................................

• Avaya Secure Router 3120, DSU Timeslots Actual Bandwidth DSU Bandwidth Value 369 27,743,839 27740 370 27,819,025 27820 371 27,894,212 27890 372 27,969,398 27970 373 28,044,585 28040 374 28,119,771 28120 375 28,194,958 28190 376 28,270,145 28270 377 28,345,331 28350 378 28,420,518 28420 379 28,495,704 28500 380 28,570,891 28570 381 28,646,077 28650 382 28,721,264 28720 383 28,796,450 28800 384 28,871,637 28870 385 28,946,824 28950 386 29,022,010 29020 387 29,097,197 29100 388 29,172,383 29170 389 29,247,570 29250 390 29,322,756 29320 391 29,397,943 29400 392 29,473,129 29470 393 29,548,316 29550 394 29,623,503 29620 395 29,698,689 29700 396 29,773,876 29770 397 2

• Avaya Secure Router 3120, configure vlanfwd management default_route This command configures a default route (within a VLAN network itself) where off-network traffic is forwarded. parameter definition gateway A gateway IP address interface The outgoing interface name - ethernet0, ethernet1, or bundle name mac_address The gateway MAC address in the form of aa:bb:cc:dd:ee:ff syntax: [ no ] default_route gateway < IP address > interface < ethernet0 | ethernet1 | bundle name | bundle name:PVC number > [ mac_address < MAC address > ] example: SR/configure/vlanfwd/management> default_route 101.12.2.2 network_02 11:22:33:44:55:66 related commands: configure vlanfwd managem

• Avaya Secure Router 3120, related commands: configure interface ethernet qos class mark_dscp configure interface ethernet qos class mark_vlan applies to: All modules configure interface ethernet qos class delete_port This command deletes application ports from this traffic class. parameter definition port Application port number or range syntax: delete_port < n | range > example: SR/configure/interface/ethernet 0/qos/class v1100> delete_port 20-21 related commands: configure interface ethernet qos class add_dscp configure interface ethernet qos class add_dst_ip configure interface ethernet qos class add_port configure interface ethernet qos class add_src_ip con

• Avaya Secure Router 3120, related commands: debug ip ospf packet hello debug ip ospf packet ls_ack debug ip ospf packet ls_request applies to: All modules debug ip ospf policy This command enables or disables debug messages for OSPF policy. Note: The router must be in routing mode to access this debug command. syntax: policy example: SR/debug/ip> ospf policy related commands: debug ip ospf all debug ip ospf database debug ip ospf dr_election debug ip ospf flooding debug ip ospf packet debug ip ospf spf debug ip ospf spf_timing debug ip ospf state_changes debug ip ospf summary applies to: All modules debug ip ospf policy Avaya Secure Router 3120 Command Reference Gui

• Avaya Secure Router 3120, related commands: configure interface avc sequence configure interface avc vlan applies to: All modules configure interface avc sequence This command sets the sequence length of an AVC. Users can choose either 12- or 24-bit spacing. parameter definition length long 24-bit sequence space short 12-bit sequence space syntax: sequence length < long | short > example: SR/configure/interface/avc wan08 22> sequence short related commands: configure interface avc bridge configure interface avc class configure interface avc cvc configure interface avc diff_delay configure interface avc enable configure interface avc fragm

• Avaya Secure Router 3120, example: SR/configure> no ftp_server related commands: configure ftp_user show ftp applies to: All modules configure ftp_user This command configures a specific user for logging into an FTP server to transfer files to and from the Secure Router. parameter definition user name The name of an approved user. Only one user is supported. syntax: configure [ no ] ftp_user user name < name > example: SR> configure ftp_user Alex The system will prompt the user to enter a new password. related commands: configure ftp_server show ftp applies to: All

• Avaya Secure Router 3120, 1. SR/configure/ip/access-list Rules_01> add permit tcp 10.1.3.9/12 10.1.100.46/255.255.255.0 dport =23 flags established log on 2. SR/configure/ip/access-list Rules_02> add deny icmp 10.1.20.9/32 any icmptype 8 icmpcode 0 log on 3. SR/configure/ip/access-list Rules_03> add permit udp 10.1.10.7 any sport =12 precedence 3 tos 2 4. SR/configure/ip/access-list Rules_04> add deny ip 10.1.100.2 255.255.255.0 precedence 5 tos 1 log on The above command entries add four filtering rules to a filtering rule set (one each for the TCP, UDP, ICMP, and IP protocols). related

• Avaya Secure Router 3120, related commands: configure interface bundle mhu redirect configure interface bundle mhu send_client_info configure interface bundle mhu send_router_info configure interface bundle mhu set_timeout applies to: All modules configure interface bundle mhu delete_entry This command deletes specific MHU host entries. parameter definition dhcp address IP address of the MHU host to be deleted from the table. syntax: delete_entry dhcp address < IP address > example: SR/configure/interface/bundle SanDiego/mhu> delete_entry 10.1.1.9 related commands: configure interface bundle mhu access_srvr_addr configure interface bundle mhu auth_srvr_addr

• Avaya Secure Router 3120, In this command, along with the Encapsulation, IP Address, counter details, ISDN related information such as TEI, Q921 keep-alive, Calling numbers, caller number, disconnect cause code, numbers to answer will be displayed. syntax: show interface bundle < bundle-name > applies to: T1, E1 module show interface bundles Existing show interface bundles command will display the ISDN bundle related information. applies to: T1, E1 module show isdn global Displays the switch-type configured and ISDN BRI interfaces on the router

• Avaya Secure Router 3120, parameter definition string Location of the host system syntax: location location < string > example: SR/configure/snmp-server> location fremont_ca related commands: configure snmp-server community configure snmp-server contact configure snmp-server enable traps configure snmp-server REM configure snmp-server REM_ configure snmp-server trap-source configure snmp-server chassis-id configure snmp-server trap-host configure snmp-server snmp-source configure snmp-server enable traps bundle applies to: All modules configure snmp-server REM This command allows users to add comments ( at th

• Avaya Secure Router 3120, parameter definition info Informational messages are logged, plus all messages described above. debug Debugging messages are logged, plus all messages described above. syntax: bundle message type < none | emerg | alert | crit | err | warning | notice | info | debug > example: SR/configure/system/logging/syslog> bundle crit applies to: All modules configure system logging syslog daemon This command configures daemon facility logging message priority. Priorities are defined hierarchically by severity, with "

• Avaya Secure Router 3120, parameter definition The range is 10 - 128; the default is 100. syntax: diff_delay value < n > example: SR/configure/interface/bundle SF_01/fr/mfr> diff_delay 60 applies to: All modules configure interface bundle fr mfr fragment_size This command sets the frame size above which a packet is fragmented. Packets are intelligently fragmented when the MFR fragment size is exceeded. parameter definition bytes Maximum number of bytes in each frame The range is 56 - 4096; the default is 1500. syntax: mfr fragment_size frame size bytes < n > example: SR/configure/interface/bundle SF_01/fr> mfr fragment_size 2048 applies to: All modules configure inte

• Avaya Secure Router 3120, | | | | | |-- burst_rate | | | | | |-- burst_rate_percent | | | | | |-- police | | | | | |-- priority | | | | | |-- queue_buffers | | | | | |-- add_src_ip | | | | | |-- add_dst_ip | | | | | |-- add_port | | | | | |-- add_vlan_id | | | | | |-- add_dscp | | | | | |-- add_dot1p | | | | | |-- delete_ip_address | | | | | |-- delete_port | | | | | |-- delete_vlan_id | | | | | |-- delete_dscp | | | | |

• configure interface bundle mhu send_router_info This command enables or disables appending the specified router's IP address during redirection. When this option is enabled (with each redirected HTTP request only), the system will append the following string (that contains the router's configured IP address) to the end of the HTTP request packet. "...router-ip: 19

More Instructions:

Avaya Secure Router 3120 Installation manual 24-04-2023 112

DOWNLOAD

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• Linksys WRP400 (6 pages) PRODUCT DATAInnovative triple-play networking solution with QoSWireless-G Broadband Router with 2 Phone PortsAll-in-one Internet-sharing Wireless-G broadband router with 4-port switchTwo standard phone jacks enable feature-rich telephone service over a broadband Internet connectionSimple, easy and secure Wi-Fi Setup with industry standard push-button WPS, wi …

• NETGEAR Orbi Pro SRR60 (2 pages) Quick Start GuidePROAttach the Mounting BaseOrbi Pro Router(Model SRR60)Ethernet cablePower adapter (varies by region)Package ContentsRubber feet (2 sets)Ceiling-MountingWall brackets (2)1211234Ceiling bracket (2)T-bracket with screw (2)T-bracket screws (2 sets)Wall anchors with screws (2 sets)Mount bases (2)Mount covers (2)Loosen the screw so that the locki …

• Cisco 520-T1 - Small Business Pro SR Secure Router (162 pages) Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco Secure Router 520 Series Software Configuration Guide Customer Order Number: Text Part Number: OL-14210-01 …

• H3C S5500-EI series (216 pages) Operation Manual – Multicast H3C S5500-EI Series Ethernet Switches Table of Contents i Table of Contents Chapter 1 Multicast Overview ......................................................................................................1-1 1.1 Introduction to Multicast........................................................................................ …

• Motorola VT2442 - Broadband Voice Gateway (2 pages) QUICK INSTALLATION GUIDEThis Quick Installation Guide has everything youneed to get your Vonage® Internet Phone Serviceworking with the Motorola VT2442 voice gateway.Take a look at the equipment, follow the simpleinstructions provided here, and in no time at all you’llbe part of the telephone revolution.This guide contains enough information for most cust …

• Patton electronics 2888 (2 pages) Page 1 of 2 Product Brief Product ModelProduct ModelProduct ModelProduct Model IpLink™ Model 2888 Product NameProduct NameProduct NameProduct Name Multi-Megabit Inverse Mux UsageUsageUsageUsage Transparent Ethernet Extender over Bonded T1/E1 Circuits Product Description The Model 2888 Multi-Megabit Inverse Mux is a managed Ethernet brid …

Comments, Questions and Opinions: