AXIOMTEK PANEL6100 Operation & User’s Manual

Text of AXIOMTEK PANEL6100 User Guide:

• ii Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. Axiomtek assumes no responsibility for any inaccuracies that may be contained in this document. Axio

• AXIOMTEK PANEL6100, iii Safety Approvals  CE Marking  FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with proper instructions, this equipment might generate or radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does ca

• AXIOMTEK PANEL6100, iv Safety Precautions Before getting started, read the following important cautions. 1. The P6100&P6100L does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. Most electronic components are

• v Table of Contents Disclaimers ....................................................................................................................................... ii FCC Compliance ............................................................................................................................. iii CHAPTER 1 INTRODUCTION 1 1.1 General Descri

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual Introduction 1 CHAPTER 1 INTRODUCTION This chapter contains the general information and the detailed specifications of the P6100&P6100L.Chapter1 includes the following sections:  General Description  Features  System Specification  Dimensions  I/O Inputs 1.1 General Description The Panel 6100&6100L, a industrial 10.4 inches view area LCD Monitor comes with slim, light and reliable features to replace traditional bulk

• P6100&P6100L Series Panel PC User’s Manual Introduction 2 The differences between P6100 &P6100L is that support different I/O inputs. You can refer to the below table to check the differences. Model IO Ports P6100 1 x RS-232 or USB for touchscreen 1 x VGA input 1 x DVI 1 x Power input 1 x RCA for video 1 x S-video for video P6100L

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual Introduction 3 1.3 Specifications  Construction: Heavy-duty steel chassis  Brightness: 230 nits  Control: OSD (On Screen Display) control pad on front side  Mounting: Support Panel mount, VESA arm mounting, and Wall mount(optional)  Net weight: 2.6 KGS  Dimension (main body size): P6100&P6100L 294.2X231.2X46.6 mm  Operating Temperature Range: -10oC ~ 55oC  Relative Humidity: 20% ~ 90%; non-condensing

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual Introduction 5 1.5 /O Inputs P6100&6100L Inputs 1. DC +12V or DC+24V: This connector will be connected to the DC 12V Switching Power Supply. 2. T/S Port (D-sub optional): This connector will be present only if a touchscreen is installed. It must be connected to the RS-232 port of the PC. The touchscreen cable is included with all orders, which include the touchscreen option 3. DVI Port: This connector can be connected to the system via the externa

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual System Setup 7 CHAPTER 2 SYSTEM SETUP This chapter details the system parts and components with figures. Sections include  System Configuration  Panel Mounting  Wall Mounting  Desktop Stand 2.1 System Configuration The figure below shows the front and back views of P6100&P6100L series. 1. Power switch: Press this button to turn on/off the monitor. 2. Power LED: When the light is green, the power is on, red light when stand by. 3. SEL+: To scroll up the menu. To increase the value of selected item. 4. SEL-: To scroll down the menu. To decrease the value of select

• P6100&P6100L Series Panel PC User’s Manual 8 System Setup 2.2 Panel Mounting Two accessory items are needed for this application. Mounting bracket x 4 pcs Pan head screws (M4x0.7PxL50.0mm) x 4 pcs Installation instruction 1. Find a plate and cut off a window, refer the 1.4 P6100&P6100L Dimensions for the dimension. 2. Screw

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual System Setup 9 The panel itself can be from 1.6 to 19.0mm thick. Strengthening may be required for the panel. Be sure to consider the weight of the P6100&P6100L when designing the panel. Note: To enhance the P6100&P6100L’s maintainability, operability and ventilation, allow at least 35mm clearance between the P6100&P6100L and any other objects. (The clearance must be large enough to allow you to insert or remove expansion boards and to attach connectors.) Side

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual 10 System Setup 2.3 Wall Mounting (Option) Bracket Wall The unit is designed to support wall mounting application. It let you to mount the unit on the wall. Three accessory items to support this feature. Wall mounting bracket x 1 pcs Binding head & washer screws (M4x0.7PxL6.0mm) x 4 pcs Truss head screws (TTS-4, 3.5x10mm-black) x 4 pcs Installation instruction 1. Refer the hole location on the page 3 Screw the truss head screws to the hole location on the wall. Note: Do not tight the screw for mount

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual System Setup 11 2.4 Desktop Stand (Option) 5.00 0 Side View The unit is designed to support desktop stand application. Two accessory items are needed for this application. Wall mounting bracket x 1 pcs Binding head & washer screws (M4x0.7PxL6.0mm) x 2 pcs Installation instruction Mounting the wall mounting bracket with the binding header & washer screws to the back over of the unit and then the unit can stand on the desktop.

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual Supported Input Timing Modes 13 APPENDIX A SUPPORTED INPUT TIMING MODES Supported Input Timing Modes Note : Timing depends on LCD Panel’s requirement. SPEC MODE Pixel Freq. Horizontal Timing Vertical Timing Sync Polar Freq. Total Active Sync Polar Freq. Total Active MHZ KHz Pixel Pixel Hz Line Line 640×480 @60Hz 25.175 VESA N 31.469 800 640 N 59.940 525 480 640×480 @60Hz 25.175 VESA N 31.469 800 640 N 59.940 525 480 640×480 @72Hz 31.500 VESA N 37.861 832 640 N 72.809 520 480 640×480 @75Hz 31.500

• AXIOMTEK PANEL6100, P6100&P6100L Series Panel PC User’s Manual OSD Operation 15 APPENDIX B OSD OPERATION Function Description of OSD Menu ※The layout and format of OSD depends on customer’s request. OSD MENU Description General Adjust the List：  Brightness of the screen .  Contrast of the screen .  Horizontal size of the screen’s image . (for VGA input only)  Vertical size of the screen’s image . (for VGA input only)  Horizontal position of the screen’s image. (for VGA input only)  Vertical po

• AXIOMTEK PANEL6100, P6122 Series Panel PC User’s Manual OSD Operation 16 OSD MENU Description Tools Adjust the List：  OSD Time out .  OSD position .  OSD Transparent.  Recall : “Yes” allows you to recover to the preset mode .  Auto Adjust…Horizontal position, Vertical position, Horizontal size, Phase of the screen’s image .  White balance Choose Source Choose Source: (option)  Analog (VGA)  Digital (DVI)

Related Products and Documents (Monitor):

Comparable Devices:

Similar Resources:

• Sharp CP-USB50 (2 pages) DECLARATION OF CONFORMITYSHARP MINI SOUND BAR, MODEL CP-USB50 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.RESPONSIBLE PARTY: …

• NEC MultiSync 75F-3 (104 pages) MODELS MultiSync 75F-3AccuSync 75F-3(N0701-3)COLOR MONITORSERVICE MANUALBetter ServiceBetter ReputationBetter Profit/MITSUBISHINEC-MITSUBISHI ELECTRIC VISUAL SYSTEMS …

• Belt-Way Scales ASM0325 (17 pages) Belt-Way Scales Inc. 1 Beltway Rd. Rock Falls IL 61071 Phone: (815) 625-5573 [email protected] www.beltwayscales.com 2021 REMOTE DISPLAY QUICK START GUIDE V2.5 …

• Bpt VM/106.01 (8 pages) • Funzionamento in stand-byNormalmente escluso (dip-switch 1 in posizioneOFF, tempo di accensione 4 s) il funzionamentoin stand-by può essere attivato portando lo stes-so dip-switch in posizione ON (tempo di accen-sione 2 s).• Funzionamento continuo Da utilizzare esclusivamente per funzioni divideocontrollo in impianti monofamiliari con tele-camera, cos …

• ViewSonic VG170m (20 pages) Full 17" Diagonal Viewable ScreenVG170m ViewPanel®User GuideGuide de l’utilisateurBedienungsanleitungGuía del usuarioGuida dell'utenteGuia do usuárioAnvändarhandbokKäyttöopasJmdh\h^kl\hihevah\Zl_ey,QVWUXNFMDREVáXJL …

• Compaq BL10e - HP ProLiant - 512 MB RAM (7 pages) ISS Technology Update Volume 7, Number 10 1 HP Solid State Drive technology ............................................................................................................... 1Meet the Expert— Brian Purcell ...................................................................... …

Comments, Questions and Opinions: