Manualios.com

Blaupunkt Q3000 Installation Manual

Blaupunkt Q3000 Manual Online:

3.75, 632 votes
Blaupunkt Q3000 User Manual
Blaupunkt Q3000 User Guide
Blaupunkt Q3000 Online Manual

Text of Blaupunkt Q3000 User Guide:

  • Blaupunkt Q3000, Table of Contents 1. Introduction __________________________________________________________ 1 2. Installation ___________________________________________________________ 4 3. Troubleshooting & Factory Reset ________________________________________ 7 4. Specifications ________________________________________________________ 9 Information and illustrations are subject to change within this

  • Blaupunkt Q3000, 1 1. Introduction This document includes information to help you install and maintain your Q3000 alarm system and its accessory devices. For information about registration and system operation using Blaupunkt Home Connect cloud server. Please refer to “Blaupunkt Home Connection User Manual” which you can download from server home page https://eu.bphomeconnect.com/ Kit Contents Control Panel The Control Panel is the hub of your alarm system. It must be powered on and connected to internet at all times. When an alarm signal is transmitted from accesso

  • Blaupunkt Q3000, 2 Accessories Door Contact The Door Contact is mounted on the Door or Window frame to detect door/window opening. When triggered, it will transmit a signal to Control Panel to alert the condition  LED Indicator: The LED will light up if the Door Contact is triggered under tamper open or low battery status to signal fault.  Learn / Test Button: The Learn / Test button is used to send signal for learning Door Contact or test range.  Tamper Switch: The tamper switch is compressed against

  • Blaupunkt Q3000, 3  Tamper Switch: The tamper switch is located inside the PIR and depressed against the back cover. It will be activated when the back cover is opened. System Extension Aside from the devices included in the package, you can further improve the capability of your alarm system by purchasing extra accessories. Such as extra PIR Sensor or Door Contract to extend your protection area; Remote Keypad for a secondary system operation platform; Smoke Detector for fire protection; Temperature Sensor for temp

  • Blaupunkt Q3000, 4 2. Installation Before proceeding to install your accessory devices, you should first complete system registration on Blaupunkt Home Connect server. Please refer to the Quick Start Guide or server user manual to complete the registration process and log into your user account. Signal Range and Walk Test All accessory devices in the Q3000 alarm kit uses wireless radio protocol to communicate with the Control Panel to save you from the extra labour of wiring the device to panel. All devices in the alarm system have an approximate range of 30 meters in typical domestic environment. The range may vary depend

  • Blaupunkt Q3000, 5 Device Location Panning: PIR Sensor ➢ Mount the PIR Sensor at 1.9-2m height for best performance. When mounted at 2m height, the PIR sensor has a range of 12m. ➢ PIR Sensor detection is most effective when the intruder is moving across its field of view from the sides. Do not mount PIR sensor in a location that faces intruder directly. ➢ Do not mount the PIR Sensor directly exposed to sunlight, which may affect detection sensitivity. �

  • Blaupunkt Q3000, 6 Mounting Door Contact 1. Pull out the plastic battery insulator on the back to activate battery and power on Door Contact. 2. The Door Contact should be mounted on the door/window frame, while the magnet should be mounted on the door/window aligned with the Rib Mark on the Door Contact. The gap between the Door Contact and the magnet should be no more than 15 mm. 3. Choose to install the Door Contact with either screw or adhesive tape Screw Mounting The Door Contact has two knockouts on the inside of the back cover where plastic is thinner for wall mounting. 4. Open the Door Co

  • Blaupunkt Q3000, 7 3. Troubleshooting & Factory Reset This chapter covers the potential issues you may encounter during system operation, and factory reset function Control Panel Control Panel Fault Orange LED indicates fault in system, When the LED light up, please login to your Blaupunkt Home Connection Server account to check fault events. The possible fault events include:  Control Panel / Devices low battery: -- Change device batteries or charge Control Panel battery accordingly.  AC power fail: -- Check AC power connection  Sensor out of order: -- Check device battery status and conduct Walk Test to confirm if the Control Panel

  • 8 Factory Reset The Factory Reset function will clear all device info and returns all system parameter to default value. After resetting you will need to setup the system by following the instruction in server user manual. 1. Power down Control Panel by disconnecting AC Power and switching off battery switch. 2. Apply AC Power while holding down the button on the back. 3

  • 9 4. Specifications All Devices Environmental Condition -10°C to 40°C, relative humidity 85% non-condensing for Control Panel and all devices. Radio Operation Range About 30m in typical domestic installation, range varies depending on building construction, device location, and environment. Control Panel Siren Output 96 dBA sound pressure @ 1m minimum Zones 40 radio

  • 10 Compliance Statement Declaration of Conformity This device complies with the requirements of the R&TTE Directive 1999/5/EC and the following harmonized standards have been applied: Health: EN62479:2010 Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EMC: EN 301 489-1 V1.9.2:2011 EN 301 489-3 V1.6.1:2013 EN 301 489-17 V2.2.1:2012

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Tiger Mini Action Game Hagrid 36287 Instruction tiger/mini-action-game-hagrid-36287-4UV.pdf 07 Sep 2022 2 0.41 Mb
2 Microchip Technology dsPICDEM 1.1 Plus Operation & user’s manual microchip-technology/dspicdem-11-plus-XIX.pdf 02 Dec 2022 93
3 LUCCI 210012 Installation instructions manual lucci/210012-E61.pdf 21 Jun 2023 7
4 Allied Telesis AT AR750S AT-AR750S AT-AR750S Datasheet allied-telesis/at-ar750s-at-ar750s-at-ar750s-DGH.pdf 01 Jan 2024 5 0.14 Mb
5 Addonics Technologies ADSA4R-E Operation & user’s manual addonics-technologies/adsa4r-e-66M.pdf 03 Sep 2022 1 0.01 Mb
6 Viconics VT8300 Series Installation manual viconics/vt8300-series-OT4.pdf 04 Dec 2023 12

Similar Resources:

  • NexSens

    G2-RAIN

    (2 pages)
    G2RAIN ALERT SYSTEMQUICK START GUIDEIMPORTANT - BEFORE FIELD DEPLOYMENT: Completely configure new G2 systems with a web connection in a near-by work area. Operate the system for several hours and ensure correct sensor readings. Use this test run to become familiar with the features and functions. To get started:a. Go to WQDataLIVE.comb. Create a new …
  • Hawk

    HA-CH01

    (8 pages)
    HA - 280 PROINSTALLERʼS MANUALManufacturer:COMMERCIAL ELECTRONICS264 HAYDONS ROAD, WIMBLEDON, LONDON SW19 8TT. UKTEL: +44 020 8404 7105 FAX: +44 020 8404 7104http://www.hawkcaralarm.com e-mail: [email protected] - 280 PROINSTALLERʼS MANUALManufacturer:COMMERCIAL ELECTRONICS264 HAYDONS ROAD, WIMBLEDON, LONDON SW19 8TT. UKTEL: +44 020 8404 7105 F …
  • Abus

    FU 8230

    (48 pages)
    Funk-Innensirene Installationsanleitung Wireless internal siren Installation instructions Sirène radio intérieure Instructions d’installation Draadloze binnensirene Installatie-instructies Sirena interna radio Istruzioni per l’installazione Trådløs indendørs sirene Installationsvejledning Radiowa syrena wewnętrzna Instrukcja instalacji FU 823 …
  • Magtek

    DynaPro Go

    (247 pages)
    MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com DynaPro Go Handheld PIN Pad Device with MSR/Contact/Contactless Programmer’s Manual (COMMANDS) April 2021 Document Number: D998200136-31 REGISTERED TO ISO 9001:2015 …
  • Argus Security

    SGCP100-IS

    (2 pages)
    [email protected] L20-SGCP1IS-0001 (vA.4) www.argussecurity.it ARGUS SECURITY S.R.L., Via del Canneto, 14 - 34015 - Muggia (TS) - Italy SGCP100-IS INTRINSICALLY SAFE WIRELESS CALL POINT GENERAL DESCRIPTION The intrinsically safe wireless call point is a wall mounted device that, when activated, initiates an alarm on the fire security system. Its constr …
  • Costar

    12-24SIR

    (4 pages)
    Carbon Monoxide Gas Alarm12-24Vdc SystemPLEASE READ AND SAVEOWNER’S MANUALModel 12-24SIRDear New COSTAR®12-24SIR Owner,Congratulations as you have taken steps to help insure thehealth and life safety of you and your family. We are proud to offeryou our unique, patented CO Sensor technology that detects CO in amanner similar to the human body’s response …

Comments, Questions and Opinions: