Manualios.com

bora PL540E Operating And Installation Instructions

  • PL540E Cooktop
  • matkKqWtgq/RI
  • Operating And Installation Instructions
  • PDF / Adobe Acrobat Reader
  • 36

bora PL540E Manual Online:

4.9, 1335 votes
bora PL540E User Manual
bora PL540E User Guide
bora PL540E Online Manual

Text of bora PL540E User Guide:

  • bora PL540E, Operating and installation instructions:  Original  Translation Manufacturer BORA Lüftungstechnik GmbH Rosenheimer Str. 32 83064 Raubling Germany Contact T +49 (0) 8035 / 907-240 F +49 (0) 8035 / 907-249 [email protected] www.bora.com The distribution and duplication of this document, as well as the use and disclosure of its contents are prohibited unless expressly authorised. © BORA Lüftungstechnik GmbH, 2015 All rights reserved.

  • bora PL540E, EN 10 Technical data www.bora.com 3 Technical data Parameter Value Supply voltage 220 - 240 V Frequency 50 Hz Power consumption 700 W Dimensions 110 x 540 x 167 mm Control box dimensions (width x depth x height) 96 x 85 x 76 mm Weight (incl. accessories/packaging) 5 kg Cooktop extractor Power levels 1 - 9 Tab. 3.1: Technical data Device dimensions 540 110 167 88 223 Abb. 3.1 Device dimensions 41 96 85 38 54 76 27 Abb. 3.2 Control box dimensions

  • EN 5 General www.bora.com Depiction of information We used standard formatting, numbering, symbols, safety instructions, terms and abbreviations so that you can work quickly and safely when using this manual. Instructions are marked with an arrow.  Always perform all instructions in the prescribed order. Enumerations are indicated with a square bullet point at the start of the line. �

  • bora PL540E, EN 28 Cleaning and Maintenance www.bora.com 8.2.2 Cleaning the cover flap, rotating mechanism and stainless steel grease filter  The cover flap, rotating mechanism and stainless steel grease filter can be cleaned manually or in a dishwasher. Manual cleaning  Use a cleaner and degreaser in one.  Rinse the cover flap, rotating mechanism and stainless steel grease filter with hot water.  Clean the cover flap, rotating mechanism and stainless steel grease filter with a soft brush.  Rinse the components well after cleaning. Cleaning in the dishwasher  Rinse the cover

  • bora PL540E, EN 3 Table of Contents www.bora.com Table of Contents 1 General 4 2 Safety 6 2.1 General safety precautions .............................. 6 2.2 Safety instructions, operation .......................... 7 2.3 Safety instructions, assembly .......................... 7 2.4 Safety instructions, disassembly and disposal ... 8 2.5 Safety instructions, spare parts ....................... 9 2.6 Use as intended ............................................... 9 3 Technical data 10 4 Energy label 11 5 Device description 12 5.1 Structure ....................................................... 12 5.2 Operating panel and operating principle ....... 12 5.3 Functional principle of th

  • bora PL540E, EN 19 Installation www.bora.com 2 1 Abb. 6.19 Securing the cooktop extractor [1] Tensioning screw [2] Clamp  Turn the four clamps [2] under the worktop.  Tighten the clamp screws [1] with max. 10 Nm.  Verify that the alignment is correct.  Once all of the installation work is complete, seal the devices with black, heat-resistant silicone sealant. 6.5.3 Preparing for installation – standard set-up INFO The floor unit must not be supported on the plinth fan housing. INFO For correct installation, the slide-

  • bora PL540E, EN 13 Device description www.bora.com  If the cover flap is closed, the cooktop extractor is deactivated.  If the cover flap is open, the cooktop extractor can be used.  If the cover flap is closed during operation, the control knob must be turned to level 0 before the cooktop extractor can be re-activated. 5.3.3 Automatic after-run The cooktop extractor continues to run at a lower level and switches off automatically after 20 minutes. 5.3.4 Filter service display The filter ser

  • bora PL540E, EN 18 Installation www.bora.com 1 2 3 Abb. 6.15 Retting the exhaust tting [1] Cooktop extractor [2] Screw [3] Exhaust fitting  Loosen the five screws [2] on the underside.  Remove the exhaust fitting [3]. 1 2 3 Abb. 6.16 Attaching the exhaust tting [1] Cooktop extractor [2] Screw [3] Exhaust fitting  Position the exhaust fitting [3] rotated by 180°.  Fasten the five screws [2].  Make sure that no air gap has formed between the components.  Put on the control knob [6].  Use the fixing screws provided to screw the control box onto the fixed front pan

  • bora PL540E, EN 23 Installation www.bora.com  Use the order code UFH (universal filter sleeve) to order the filter sleeve from your specialist supplier or contact BORA via the website at www.bora.com. Abb. 6.29 Wrap the connection cable round the ferrite sleeve three times  Wrap the connection cable around the ferrite sleeve three times to create the desired filter performance.  Ensure that the cable end protrudes at least 120 mm from the sleeve.  Prepare the connection cable in accordance with the prescrib

  • bora PL540E, Germany: BORA Lüftungstechnik GmbH Rosenheimer Str. 32 83064 Raubling Germany T +49 (0) 8035 / 907-240 F +49 (0) 8035 / 907-249 [email protected] www.bora.com Austria: BORA Vertriebs GmbH & Co KG Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Austria T +43 (0) 5373 / 62250-0 F +43 (0) 5373 / 62250-90 [email protected] www.bora.com Europe: BORA Holding GmbH Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Austria T +43 (0) 5373 / 62250-0 F +43 (0) 5373 / 62250-90 [email protected] www.bora.com Australia – Ne

  • bora PL540E, EN 8 Safety www.bora.com DANGER! Risk of electric shock! Incorrect stripping of the connec- tion cable to external switching devices results in a risk of electric shock. Ensure that the connection cable is secured with the strain relief clamp within the universal con- trol unit. Ensure that the stated stripping lengths are adhered to. Check the device for visible damages before installing it. Do not install a damaged device.  A damaged device may put your safety at risk! Repair and maintenance work may

  • bora PL540E, EN 4 General www.bora.com INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH - hereinafter referred to as BORA - shall not assume any liability for damage caused by non-compliance with these documents nor by improper assembly! The electricity and gas connections must be implemented by a certified engineer. Assembly must only take place in compliance with the applicable norms, regulations and laws. All safety and warning information and handling instructions in the operating and assembly instructions must

  • bora PL540E, EN 9 Safety www.bora.com INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungs technik GmbH shall not assume any liability for damage arising from non-adherence to the safety and warning instructions. DANGER! Risk of suffocation! Parts of the packaging (e.g. lms, polystyrene) can be fatal to children. Store packaging materials away from the reach of children. Dispose of packaging correctly and promptly. 2.5 Safety instructions, spare

  • EN 30 Troubleshooting www.bora.com 9 Troubleshooting  Observe all safety and warning information (see the Safety section). Operating situation Cause Remedy The cooktop extractor cannot be switched on. The fuse or automatic circuit breaker of the electrical wiring system in the apartment and/or house is defective. Replace the fuse. Switch the automatic circuit brea

  • bora PL540E, EN 30 Decommissioning, disassembly and disposal www.bora.com 10 Decommissioning, disassembly and disposal  Observe all safety and warning information (see Safety chapter).  Follow the enclosed manufacturer's information. 10.1 Decommissioning Decommissioning is considered the final decommissioning and disassembly. After decommissioning, the device can either be built into another piece of furniture, sold on privately, or disposed of. INFO Disconnecting and connecting the electricity and gas connection may only be carried out by certified experts.  Switch off the device before decommissioning (see Operating chapter)  D

  • bora PL540E, EN 12 Device description www.bora.com 5.1 Structure 7 6 5 4 3 2 1 Abb. 5.1 Cooktop extractor [1] Stainless steel grease filter [2] Cover flap [3] Cooktop extractor [4] Control knob [5] Power level sleeve [6] Rotating mechanism [7] Universal control unit 5.2 Operating panel and operating principle 1 2 3 Abb. 5.2 Control knob [1] Control knob [2] Power level sleeve [3] Indicator light 5 Device description Observe all safety and warning information during operation (see the Safety section). The coo

  • bora PL540E, EN 27 Cleaning and Maintenance www.bora.com 8.2 Cleaning the cooktop extractor Grease particles and limescale residues from cooking vapours can settle on the surface and in the extraction system.  Make sure that the cooktop extractor is switched off (see the Operation section).  Remove the cover flap, rotating mechanism and stainless steel grease filter prior to cleaning.  Clean the cooktop extractor in accordance with the cleaning cycles.  Clean the surfaces using a soft, da

  • bora PL540E, EN 25 Operation www.bora.com  Use the control wheel [2] to open the cooktop extractor’s cover flap [1]. Depending on the direction in which the cover flap has been inserted, it is opened by turning the control wheel to the left or the right. Switching on the cooktop extractor Abb. 7.2 Switching on the cooktop extractor  Press in the control knob and turn it to level 1 to switch on the cooktop extractor.  The indicator light comes on. Switching off the cooktop extractor Abb. 7.3 Switching o the cooktop extractor  Press in the control knob and turn it to level x.  Next, turn it back to level 0.  The control knob locks

  • bora PL540E, EN 16 Installation www.bora.com 187 60 128 Abb. 6.8 Universal control unit installation dimensions > 700 > 900 > 74 Abb. 6.9 Device installation dimensions 6.5 Installing the extraction system INFO A clearance of one millimetre should be planned between the built-in appliances. INFO A clearance of two millimetres should be planned around the built-in appliances. INFO The mounting rail supplied with the cooktop should be installed between the cooktops as well as between the cooktops and the cooktop extractor. INFO Cable protection (false floor) should be mounted below the appliances. This needs to be removable for maintenance work. >

  • bora PL540E, EN 22 Installation www.bora.com 6.7 Connecting external switch contacts INFO The Home-In and Home-Out communication connections must only be connected by a certified specialist. The specialist also assumes responsibility for the proper installation and commissioning. When using Home-In and Home-Out, you will require the relevant documents for the external switch devices in order to ensure safe device connection and operation. The following switch contacts can be used: Contact Function Connection Home-In Cooktop extractor on/off connection for external switch contact (contact closed: cooktop extractor on) 24V DC 100 mA Home-Out Electrically isolated contact

  • bora PL540E, EN 29 Cleaning and Maintenance www.bora.com 8.3 Cleaning the control knobs  Make sure that the cooktop extractor is switched off (see the Operation section). INFO Only clean the control knob manually.  Pull off the control knob.  Clean the control knob with a soft brush.  Rinse the control knob well after cleaning.  Allow the control knob to dry thoroughly.  Push the control knob onto the control box axle. 8.4 Replacing the activated charcoal filter In recirculation mode, an additional activated charcoal filter is used. The activated charcoal filter absorbs cooking odours. The activated charcoal filter is installed on the plinth fan or the

  • EN 6 Safety www.bora.com INFO In the recirculated air mode, only a small amount of moisture is removed from the cooking vapours. Make sure that the room is sufficiently ventilated to the outside air in the recirculated air mode, e.g. through an open window. Ensure a normal and comfortable indoor climate (45-60% humidity), e.g. through natural ventilation openi

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ZyXEL Communications Auto Configuration Server Vantage Access Quick start manual zyxel-communications/auto-configuration-server-vantage-access-9EO.pdf 07 Apr 2023 113 1.03 Mb
2 Zte V72M Operation & user’s manual zte/v72m-F45.pdf 31 Dec 2023 14
3 Axxcelera Broadband Wireless AB-100 Operation & user’s manual axxcelera-broadband-wireless/ab-100-E85.pdf 17 Dec 2023 111
4 Jupiter Avionics JA72-006 Installation and operating manual jupiter-avionics/ja72-006-957.pdf 22 Feb 2024 19
5 Sharp MX-M904 Technical handy manual sharp/mx-m904-9EU.pdf 07 Jan 2023 76
6 Epson LX-350 Manual  epson/lx-350-L81.pdf 16 Jun 2023 7 0.06 Mb

Similar Resources:

  • Maytag

    MGRH865QDS11

    (10 pages)
    COOKTOP PARTS1For Models: MGRH865QDS11(Stainless Steel)9−07 Litho In U.S.A. (cjj)Part No. W10161498 Rev A30" GAS FREESTANDINGSELF CLEAN RANGESEALED BURNERCONVECTIONIllus. PartNo. No. DESCRIPTIONIllus. PartNo. No. DESCRIPTIONIllus. PartNo. No. DESCRIPTION1 Literature PartsW10156248InstallationInstructionsW10129 …
  • Electrolux

    S90

    (24 pages)
    thermaline S90GAS HEATED CHAR GRILL - GRILLOIR A GAZDoc. 62.9678.01_ULEdition 102.2006US INSTALLATION- AND OPERATING INSTRUCTIONS page 3FR INSTRUCTIONS D’INSTALLATION ET D’EMPLOI page 11FOR YOUR SAFETYDo not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.POUR VOTRE SÉCURITÉ Ne déposez pas ou n …
  • Kenmore

    790.9375

    (24 pages)
    ®ELECTRIC RANGEUse & Care GuideESTUFA ELECTRICAManual del UsuarioModel Nos.790.93750790.93751790.93752790.93754Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. PIN 316257907 (0103)www.sears.com …
  • Hotpoint

    RA720

    (24 pages)
    ge.comSafety Instructions ........ 2-4Operating InstructionsO_en .................... 6-9Surface Units ................ 5Care and CleaningBroiler Pan and Grid ........ l lCooktop ............... 10, 11Knobs .................... 12Oven Door . ............... 11Oven Heating Elements ...... 11Oven Interior .............. 12Painted Surfaces ............ 19Shelve …
  • Amana

    AGR5630BDW0, AGR5630BDS0, AGR5630BDB0

    (20 pages)
    INSTALLATIONINSTRUCTIONS30" (76.2 CM) FREESTANDINGGAS RANGESTableofContentsRANGE SAFETY ...................................................................................... 1INSTALLATION REQUIREMENTS ......................................................... 3Tools and Parts .............................................................................. …
  • KitchenAid

    KERS206XSS

    (4 pages)
    INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.Clearances and Dimensions1. Provide adequate clearances between the range and adjacent combustible surfaces.2. Location—Check location where the range will be installed. Check fo …

Comments, Questions and Opinions: