Manualios.com

Calix T073G HGU ONT Operation & User’s Manual

  • T073G HGU ONT Wireless Router
  • ma1pcRMIJ7LYk
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 22

Calix T073G HGU ONT Manual Online:

3.7, 965 votes
Calix T073G HGU ONT User Manual
Calix T073G HGU ONT User Guide
Calix T073G HGU ONT Online Manual

Text of Calix T073G HGU ONT User Guide:

  • Calix T073G HGU ONT, 20 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. T073G LED Field Descriptions LED Color Status Indication POWER Green Solid ONT is operating from AC power Slow Blink ONT is operating from UPS power Fast Blink System Booting Red Solid UPS battery low LINK Green Solid Optical link is OK Off Optical link is NOT OK AUTH Green Solid ONU is authorized Blink ONU is registering Off ONU is NOT authorized LAN1/4 Green Solid LAN port connected, but no data transmission.

  • Calix T073G HGU ONT, Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Contents Chapter 1: Product Description ............................................. 5 Introduction ................................................................................................................ 5 Services ...................................................................................................................... 5 Features...................................................................................................................... 6 Specifications ....................................................

  • Calix T073G HGU ONT, 21 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Troubleshooting Procedures The table below provides basic procedures for troubleshooting. Troubleshooting Procedures Problem Procedure The POWER LED is off  Check whether the Power Switch button on the rear of the ONT is pressed  Check whether the power adapter matches the ONT  Check whether the power connection is correct The LINK LED is off  Check w

  • Calix T073G HGU ONT, 14 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Connecting to an External UPS UPS power cord can be ordered from Calix. They are sold as 1 meter and 3 meter pre- terminated cables, as well as 6 meter un-terminated (UPS) cables. The UPS power cord is sold separate from the ONT package. The figure and table below show the PIN numbering of the UPS connector on the ONT. UPS Pin Numbering UPS PIN Signal Description PIN Color

  • 13 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Connecting Power The T073G can be powered by the AC power adapter or by an UPS power. This section describes how to power the ONT by both. Note: Do not connect the enclosed power supply adapter and an external UPS simultaneously, as thi

  • Calix T073G HGU ONT, 15 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Connecting Ethernet Service 1. Locate the premises Ethernet LAN cable. 2. If the cable is not terminated, follow local practices to attach an RJ-45 connector. 3. Plug the Ethernet cable into the ONT RJ-45 Ethernet port. 4. Repeat step 2-3 as needed to connect additional Ethernet cables. Ethernet RJ-45 Connector Wiring Pattern Pin Color Signal Pin Color Sign

  • 12 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Connecting to the PON Network 1. Locate a safe and accessible site for installation. 2. Remove the dust covers from the SC/APC optical connector. Clean the connectors if necessary. 3. Plug in the fiber connector to connect the ONT to the network.

  • Calix T073G HGU ONT, Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Chapter 4 Troubleshooting ONT Status LEDs The ONT status LEDs assist with installation and maintenance procedures. These LEDs are described below. T073G HGU ONT LEDs

  • Calix T073G HGU ONT, Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Chapter 3 Installation Get to Know the ONT The figures below provide a physical overview of the ONT.

  • Calix T073G HGU ONT, 6 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Features The ONT incorporates the following features:  Single fiber GPON interface with 1244 Mbps upstream and 2488 Mbps downstream data rates  Advanced data features such as VLAN tag manipulation, classification, and filtering  Traffic classification and QoS capability  SIP-based Analog Telephone Adapter (ATA) function, which provides the different classification services, and supports caller display, call w

  • Calix T073G HGU ONT, 4 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Chapter 4: Troubleshooting ................................................. 19 ONT Status LEDs ..................................................................................................... 19 Troubleshooting Procedures .................................................................................. 21

  • Calix T073G HGU ONT, 10 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Mounting Restrictions Follow the mounting restrictions below to ensure the ONT works safely:  Do not stack ONTs or stack ONTs on top of other equipment.  Ensure there is a minimum of 100 mm (4") clearance directly above the top cover of the unit.  Ensure there is a minimum of 50 mm (2") clearance next to the side vent of the unit.  Ensure there are no external heat sources directly above or below the unit. Laser Safe

  • Calix T073G HGU ONT, 7 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Specifications Physical Specifications Dimensions  Height: 47 mm (1.85 inch)  Width: 229 mm (9 inch)  Depth: 174 mm (6.85 inch) Weight 640 g (1.4 lbs.) GPON interface SC/APC angled optical connector POTS interface RJ-11 connector Ethernet interface RJ-45 connector Electrical Specifications Input Power +12 VDC power input Power Supply AC power supply with included power adapter Power Consumption < 14.4 W Environmental Specifications Temperature Operating: 0° to +40°C (32�

  • Calix T073G HGU ONT, Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved. Chapter 1 Product Description Introduction The T073G Optical Network Terminal (ONT) is an ITU-T G.984 compliant device that receives voice, data, and video traffic in the form of optical signal from the service provider Passive Optical Network (PON) and transmitted it to the desired format at residential or business premises. Upstream traffic is likewise transmitted to the PON network through the fiber optic cable. A single optical fiber carries both upstream and downstream traffic. Services The T073G is equipped with ITU-

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung WA11K2S Operation & user’s manual samsung/wa11k2s-814.pdf 17 Dec 2023 12 0.53 Mb
2 Sony HD-EG5U Operating instructions sony/hd-eg5u-T96.pdf 17 Mar 2024 2 0.79 Mb
3 KitchenAid KSCS23INBL00 Parts list kitchenaid/kscs23inbl00-6K3.pdf 31 Mar 2023 21
4 Sub-Zero IC-27R Use & care manual sub-zero/ic-27r-4PC.pdf 21 Mar 2024 36 1.24 Mb
5 Cooper Lighting Shaper 635-18 Installation instructions cooper-lighting/shaper-635-18-4JT.pdf 27 Aug 2023 1
6 Fluke 35040 Operators Operator's manual fluke/35040-operators-NT3.pdf 22 Jul 2022 94 0.87 Mb

Similar Resources:

  • Juniper

    M320

    (38 pages)
    M320 Multiservice Edge RouterQuick StartJune 2016Part Number: 530-071202Revision 1This document describes how to install the Juniper Networks M320 Multiservice EdgeRouter.ContentsM320 Quick Start Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Step 1: Prepare the Site for M320 Installation . . . . . . . . . . …
  • TRENDnet

    TEW-511BRP

    (20 pages)
    Copyright ©2005. All Rights Reserved. TRENDware International, Inc. TRENDnetTRENDware, USAWhat's Next in NetworkingTEW-511BRPVersion 04.28.05Dual-Band 802.11 a+g Wireless Router Quick Installation GuideGuide d'installation rapide duRouteur sans fil 802.11 a+g Dual bandAnleitung zur Schnellinstallation desDrahtloser 802.11 a+g Dualband-RouterGuí …
  • Panasonic

    KX-TES824

    (298 pages)
    Thank you for purchasing a Panasonic Advanced Hybrid System.Please read this manual carefully before using this product and save this manual for future use.KX-TES824/KX-TEM824: Version 2.0 KX-TES824 Model KX-TEM824Advanced Hybrid SystemFeature Guide …
  • TRENDnet

    TV-IP572WI

    (6 pages)
    TV-IP572WIrev: 05.15.2012PRODUCT OVERVIEW• See more with Megapixel resolution up to 1280 x 800 (WXGA)• Night vision up to 7.5 meters indoors* • High speed wireless n connection • Program motion detection recording, recording schedules, email alerts and more with complimentary software• 2-way audioMegapixel Wireless N Day / Night Internet Camer …
  • Encore

    ENH-WI-3GN3

    (7 pages)
    ENHWI-3GN3 Specification Sheet www.encore-usa.com ENHWI-3GN3 3G MOBILE BROADBAND WIRELESS N150 ROUTER plus REPEATER The Encore’s ENHWI-3GN3 is a 3G-enabled Wireless-N Router that supports home network with superior throughput, performance and unparalleled wireless range. With ENHWI-3GN3, you can share one 3G Wireless internet subscription to others thr …
  • NETGEAR

    WG302v1 - ProSafe 802.11g Wireless Access Point

    (3 pages)
    WG302v2, WAG302v2 – DHCP: Use and Configuration The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The WG302v2/WAG302v2 provides the pre-configured TCP/IP configuration for wireless clients connected to the access point. The WG302v2/WAG302v2 DHCP server only assigns network information to clients that connect to the access point thr …

Comments, Questions and Opinions: