Cisco MDS 9000 Command Reference Manual
|
Cisco MDS 9000, Send documentation comments to [email protected] 22-134 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show interface 2 Active TCP connections Control connection: Local 43.1.1.2:3225, Remote 43.1.1.1:65532 Data connection: Local 43.1.1.2:3225, Remote 43.1.1.1:65534 30 Attempts for active connections, 0 close of connections TCP Parameters Path MTU 1500 bytes Current retransmission timeout is 300 ms Round trip time: Smoothed 10 ms, Variance: 5 Advertised window: Current: 122 KB, Maximum: 122 KB, Scale:
Cisco MDS 9000, Send documentation comments to [email protected] 6-58 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 6 Debug Commands debug fspf If you receive an error in computing routes for VSANs, issue the debug fspf error and the debug fspf route commands. If you receive an error due to the interface being stuck in a state other than FULL, use the debug fspf event and debug fspf fc pkt commands on the interfaces involved. Examples The following example displays the system output when the debug fspf all command is issued: switch1# debug fspf all Apr 5 11:50:01 fspf: Wrong hello interval for packet on interface 100f0
Cisco MDS 9000, Send documentation comments to [email protected] 8-29 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 8 F Commands fcid-last-byte fcid-last-byte Use the fcid-last-byte command to allocate the last byte FCID for the fabric address. To disable the configuration or to revert to factory defaults, use the no form of the command. fcid-last-byte last-byte-id no fcid-last-byte last-byte-id Syntax Description Defaults 0 Command Modes FICON configuration submode. Command History Usage Guidelines This is an optional configuration. If you are not sure of the EBCDIC format to be used
Cisco MDS 9000, Send documentation comments to [email protected] 8-72 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 8 F Commands find find To display a list of files on a file system, use the find command in EXEC mode. find filename Syntax Description Defaults None. Command Modes EXEC mode. Command History Usage Guidelines Use the find (Flash file system) command to display more detail about the files in a particular file system. Examples The following example is sample output of all files that begin with the letter a: switch# find a ./accountingd ./acl ./ascii_cfg_server ./arping Related Commands filename
Cisco MDS 9000, CHAPTER Send documentation comments to [email protected] 10-1 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x 10 H Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “About the CLI Command Modes” section on page 1-3 to determine the appropriate mode for each command. For more information, refer to the Cisco MDS
Cisco MDS 9000, Send documentation comments to [email protected] 22-48 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show crypto spd domain ipsec show crypto spd domain ipsec To display the security policy database (SPD), use the show crypto spd domain ipsec command. show crypto spd domain ipsec [interface gigabitethernet slot/port [policy number]] Syntax Description Defaults Displays all SPD information. Command Modes EXEC mode. Command History Usage Guidelines To use this command, IPsec must be enabled using the crypto ipsec enable command. Examples The following example shows how to display the SPD. switch# show crypto
Send documentation comments to [email protected] 22-31 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show cloud membership show cloud membership To display membership information about the cloud, use the show cloud membership command. show cloud membership [all | interface {gigabitethernet
Cisco MDS 9000, Send documentation comments to [email protected] 11-32 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 11 I Commands interface iscsi interface iscsi To configure an iSCSI interface, use the interface iscsi command. To revert to default values, use the no form of the command. interface iscsi slot/port mode {pass-thru | store-and-forward} tcp qos value interface iscsi slot/port no mode {pass-thru | store-and-forward | cut-thru} no tcp qos value no interface iscsi slot/port Syntax Description Defaults Disabled. The TCP Qo
Cisco MDS 9000, Send documentation comments to [email protected] 22-171 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show iscsi session The following command displays the specified iSCSI target. switch# show iscsi session target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8 Session #1 Target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d VSAN 1, ISID 000000000000, Status active, no reservation Note On the IPS module, you can verify what iSCSI initiator IQN has been assigned which pWWN when it lo
Send documentation comments to [email protected] 8-81 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 8 F Commands fspf retransmit-interval fspf retransmit-interval To specify the time after which an unacknowledged link state update should be transmitted on the interface, use the fspf retransmit-interval c
Cisco MDS 9000, Send documentation comments to [email protected] 8-40 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 8 F Commands fcrxbbcredit extended enable fcrxbbcredit extended enable To enable Fibre Channel extended buffer-to-buffer credits (BB_credits), use the fcrxbbcredit extended enable command in configuration mode. To disable the feature, use the no form of the command. fcrxbbcredit extended enable no fcrxbbcredit extended enable Syntax Description This command has no other arguments or key
Cisco MDS 9000, Send documentation comments to [email protected] 22-369 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show zone analysis show zone analysis To display detailed analysis and statistical information about the zoning database, use the show zone analysis command. show zone analysis {active vsan vsan-id | vsan vsan-id | zoneset name vsan vsan-id} | Syntax Description Defaults None. Command Modes EXEC mode. Command History Usage Guidelines None. Examples The following example displays detailed statistics and analysis of the active zoning data
Send documentation comments to [email protected] 22-135 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show interface 5 minutes output rate 375002168 bits/sec, 46875271 bytes/sec, 33833 frames/sec iSCSI statistics 6202235 packets input, 299732864 bytes Command 6189718 pdus, Data-out 1937 pdus, 19
Send documentation comments to [email protected] 4-47 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 4 C Commands clear install failure-reason clear install failure-reason To remove the upgrade failure reason log created during in-service software upgrades (ISSUs) on the Cisco MDS 9124 Fabric Switch, use the
Cisco MDS 9000, Send documentation comments to [email protected] 22-181 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show islb pending show islb pending To display iSCSI server load balancing (iSLB) pending configurations, use the show islb pending command. show islb pending Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Usage Guidelines None. Examples The following example shows iSLB pending configuration information. switch# show islb pending iscsi initiator idle-timeout 10 islb initiator ip-address 10.1.
Cisco MDS 9000, Send documentation comments to [email protected] 22-119 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show hardware bootflash: 251904 kB slot0: 251904 kB 172.22.31.238 kernel uptime is 0 days 0 hour 2 minute(s) 25 second(s) Last reset at 744021 usecs after Tue Oct 21 14:55:11 1980 Reason: Reset Requested by CLI command reload System version: 4.0(0.432) Service: -------------------------------- Switch hardware ID information -------------------------------- MDS Switch is booted up Switch type is "MDS 9 Slot Chassis" Model number is DS-
Cisco MDS 9000, Send documentation comments to [email protected] 6-47 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 6 Debug Commands debug fcsp-mgr Usage Guidelines None. Examples The following example displays the system output when the debug fcsp-mgr all command is issued: switch# debug fcsp-mgr all 2004 Mar 29 23:33:56 fcsp-mgr: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) 2004 Mar 29 23:33:56 fcsp-mgr: fu_fsm_execute_all: null fsm_event_list 2004 Mar 29 23:33:56 fcsp-mgr: fu_fsm_engine_post_event_processing: mts msg MTS_ OPC_DE
Cisco MDS 9000, CHAPTER Send documentation comments to [email protected] 20-1 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x 20 R Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes” section to determine the appropriate mode for each command. For more information, refer to the Cisco MDS 9000 Family CLI Configu
Cisco MDS 9000, Send documentation comments to [email protected] 20-38 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 20 R Commands rscn distribute rscn distribute To enable distribution of a Registered State Change Notification (RSCN) configuration, use the rscn distribute command in configuration mode. To disable the distribution, use the no form of the command. rscn distribute no rscn distribute Syntax Description This command has no arguments or keywor
Cisco MDS 9000, Send documentation comments to [email protected] 6-21 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 6 Debug Commands debug dpvm debug dpvm To enable debugging for dynamic port VSAN membership (DPVM), use the debug dpvm command in EXEC mode. To disable a debug command use the no form of the command or use the no debug all command to turn off all debugging. debug dpvm {all | cfs-events | change-events | db-events | errors | ftrace | merge-event | mts-events | pss-events | session-events | snmp-events | sys-events} no debug dpvm {all | cfs-events | change-
Cisco MDS 9000, Send documentation comments to [email protected] 1-14 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 1 CLI Overview Navigating Through CLI Commands Command Completion In any command mode, you can begin a particular command sequence and immediately press the Tab key to complete the rest of the command. switch (config)# ro<Tab> switch (config)# role <Tab> switch (config)# role name This form of help is called command completion, because it completes a word for you. If several options are available for the typed letters, all options that match those letters are presented: switch(config)# fc<Tab> fcalias
Send documentation comments to [email protected] 22-130 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 22 Show Commands show interface Examples The following example shows how to display information about a Fibre Channel interface. switch# show interface fc1/11 fc1/11 is up Hardware is Fibre Channel Port WWN is 20:0b:00:05:3
Cisco MDS 9000, Send documentation comments to [email protected] 18-20 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 18 P Commands port-security commit port-security commit To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the port-security commit command in configuration mode. port-security commit vsan vsan-id Syntax Description Defaults None. Command Modes Configuration mode. Command History Usage Guidelines None. Examples The following example shows how to commit changes to the active port security configuration. switc
Cisco MDS 9000, Send documentation comments to [email protected] 23-13 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 23 T Commands tail tail To display the last lines (tail end) of a specified file, use the tail command in EXEC mode. tail filename [number-of-lines] Syntax Description Defaults Displays the last 10 lines. Command Modes EXEC mode. Command History Usage Guidelines You need two separate CLI terminals to use this command. In one terminal, execute the run-script or any other desired command. In the other, issue the tail command
Cisco MDS 9000, Send documentation comments to [email protected] 4-12 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x Chapter 4 C Commands cfs ipv4 mcast-address cfs ipv4 mcast-address To configure an IPv4 multicast address for Cisco Fabric Services (CFS) distribution over IPv4, use the cfs ipv4 mcast-address command in configuration mode. To disable this feature, use the no form of the command. cfs ipv4 mcast-address ipv4-address no cfs ipv4 mcast-address ipv4-address Syntax Description Defaults Multicast add
Cisco 2621 Switch Operation & user’s manual
2621 |
Cisco Catalyst Series Switch 2940 Switch Manual
Catalyst Series Switch 2940 |
Cisco E3200 Switch Brochure & specs
E3200 |
Cisco Catalyst 2960 Switch Product bulletin
Catalyst 2960 |
Cisco 12000 - Series Chassis Modular Expansion Base Switch Datasheet
12000 - Series Chassis Modular Expansion Base |
Cisco AIR-PCI340 Switch Installation and configuration manual
AIR-PCI340 |
Cisco CVR100W Switch Administration manual
CVR100W |
Cisco 800 Series Switch Quick start manual
800 Series |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | thomann | The T.Bone TWS One Guitar | Operation & user’s manual | thomann/the-tbone-tws-one-guitar-95F.pdf | 18 Mar 2024 | 32 | |
2 | Craftsman | 82141 | Owner's manual | craftsman/82141-162.pdf | 06 Feb 2024 | 36 | 0.93 Mb |
3 | Universal Laser Systems | VLS2.30 | Operation & user’s manual | universal-laser-systems/vls2-30-2RC.pdf | 10 Apr 2024 | 99 | |
4 | StarTech.com | ST123HDA | Operation & user’s manual | startech-com/st123hda-3A5.pdf | 22 Sep 2022 | 10 | |
5 | Smart 2 | DSD158 | Operation & user’s manual | smart-2/dsd158-7Q7.pdf | 05 Oct 2023 | 68 | |
6 | Eastwood | MIG 135 | Assembly and operating instructions manual | eastwood/mig-135-7A5.pdf | 20 Nov 2022 | 12 |
D-Link
CLI Command ReferenceProduct Model: DWS-4000 Series DWL-8600AP Unified Wired & Wireless Access System Release 1.0 December 2009©Copyright 2009. All rights reserved.
…
DWS-4000 Series(566 pages) |
AMX
QUICK START GUIDEENOVA DVX-225xHD 6x3 All-in-One Presentation SwitcherOverviewThis guide applies to the following Enova DVX-225xHD 6x3 All-in-One Presentation Switchers:•DVX-2250HD-SP (FG1906-11)•DVX-2250HD-T (FG1906-13)• DVX-2255HD-SP (FG1906-12)• DVX-2255HD-T (FG1906-14)The purpose of this document is to illustrate how to set up a device in its sim …
DVX-2250HD-SP(2 pages) |
Avaya
Installation Job Aid (English) for AvayaEthernet Routing Switch 5600 Series(NN47200-304, ver 01.01)Before you beginEnsure the area where you install and use the Avaya ERS 5600 Series switch meets thefollowing environmental requirements:•Ambient temperature between 32° and 106° F (0° and 50° C)• Relative humidity between 10% and 90% noncondensing• N …
5600 Series(14 pages) |
ACR Electronics
Alert Settings (Guardian/Core)SoundSiren (Default)VolumeAlert Delay2secondsConnected to(Guardian only)Pause Alert Sound1. Accept the alarm with the ACR OLAS App.Troubleshooting2. Bring the Tag within 1 meter of the Guardian.3. Cancel the alarm on the Guardian by pressing the control switch once. After 10 seconds the system will be tracking again.4. Navigate …
OLAS GUARDIAN(2 pages) |
Orei
SpecificationsInput ports 3 x HDMIOutput ports 1 x HDMIPower indicator led1 xLEDSignal indicator led3xLEDWorking temperature0℃~60℃Power supplyDC5V/1APower consumption<5WDimensionWeightColorBlackItems· SPECIFICATION 160(L)×51.5(W)×20(H)mm230gHDMI Resolution480i/480p/576i/576p/720p/1080i/1080p/4K×2K@24/25/30/60HzHDMI Version Compatible with DVI1. …
3X1(2 pages) |
showhome
Federal Communications Commission (FCC) StatementFCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful inte …
ZW30(3 pages) |
Philips DVD Player DVDR3408Philips DVD Player Quick start manual (File: philips-dvdr3408-quick-start-manual-2, Tuesday 30-01-2024) DVDR3408, 2 |
Grizzly Saw Polar Bear G0833PGrizzly Polar Bear G0833P User Manual (Doc Type: Saw Owner's manual) Polar Bear G0833P, 92 |
Bestron Scales AKS700SDPDF User Guide (@8MZO31), Bestron AKS700SD Scales (31/08/2023) AKS700SD, 20 |
SOUNDMASTER Clock Radio DAB450Clock Radio #79S1O9 DAB450, 9 |
Vulcan-Hart Kettle VDL100Kettle Replacement parts catalog (Vulcan-Hart VDL100) VDL100, 5 |
Toshiba Laptop Satellite L750Operation & user’s manual for Toshiba Satellite L750 Laptop Satellite L750, 194 |
Peavey Musical Instrument Amplifier DPB HeadManual: Peavey DPB Head (14S1DE, Upd.Wednesday 07-02-2024) DPB Head, 8 |
Samsung Oven BQ1S4T244Samsung Oven Operation & user’s manual (File: samsung-bq1s4t244-operation-user-s-manual-120, Friday 02-02-2024) BQ1S4T244, 120 |
Yamaha Outboard Motor AR230Yamaha AR230 Outboard Motor Owner's and operator's manual AR230, 114 |
Sony Car Receiver MDX-F5800Installation/connections for Sony MDX-F5800 Car Receiver MDX-F5800, 2 |
Elk Products Receiver ELK-M1XRFEGElk Products ELK-M1XRFEG User Manual (Installation manual), @C8U64X ELK-M1XRFEG, 16 |
Samsung All in One Printer SF-760PSamsung SF-760P Manual (Operation & user’s manual), @3QWQ86 SF-760P, 2 |