Manualios.com

Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual

  • 1130AG - Aironet - Wireless Access Point Wireless Access Point
  • maRSStVaOnKuI
  • Hardware Installation Manual
  • PDF / Adobe Acrobat Reader
  • 126

Cisco 1130AG - Aironet - Wireless Access Point Manual Online:

3.15, 1645 votes
Cisco 1130AG - Aironet - Wireless Access Point User Manual
Cisco 1130AG - Aironet - Wireless Access Point User Guide
Cisco 1130AG - Aironet - Wireless Access Point Online Manual

Text of Cisco 1130AG - Aironet - Wireless Access Point User Guide:

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 2-19 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 2 Installing the Access Point Securing the Access Point Connecting to an Ethernet Network with Local Power Follow these steps to connect the access point to an Ethernet LAN when you are using a local power source: Step 1 If necessary, open the access point cover (see the “Opening the Access Point Cover” section on page 2-8). Step 2 Pull the Category 5 Ethernet cable and the power module cable out of the access point cable bay area approximately 1 foot

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 2-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 2 Installing the Access Point Unpacking the Access Point Unpacking the Access Point Follow these steps to unpack the access point: Step 1 Open the shipping container and carefully remove the contents. Step 2 Return all packing materials to the shipping container and save it. Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. Package Contents Each access point package contains the followin

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 xvi Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Preface Obtaining Additional Publications and Information Cisco TAC Escalation Center The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case. To o

  • Cisco 1130AG - Aironet - Wireless Access Point, CHAPTER CISCO CONFIDENTIAL - Draft 2 2-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 2 Installing the Access Point This chapter describes the installation of the access point and includes these sections: • Safety Information, page 2-2 • Warnings, page 2-2 • Unpacking the Access Point, page 2-3 • Basic Installation Guidelines, page 2-3 • Before Beginning the Installation, page 2-4 • Installation Summary, page 2-7 • Opening the Access Point Cover, page 2-8 • Mounting the Access Point, page 2-9 • Attaching th

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 6-6 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 6 Troubleshooting Low Power Condition CDP Inline Power Negotiation The access point uses CDP (Cisco Discovery Protocol) to negotiate with the in-line power source for sufficient power. The results of these negotiations will either be a decision to enter full power mode or to remain in low power mode. Independent of the CDP negotiations, the access point hardware uses the 802.3af classification scheme to report maximum power is required by the access point. Currently, Cisco switches (802.3af capable) do not support CDP in-l

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 Index IN-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 status indicators C-1 storage temperature C-1 T TAC 6-1 Telnet 3-11 temperature operating C-1 storage C-1 terminal emulator 3-4 TFTP server 6-11 troubleshooting 6-1 U unpacking 2-3 user EXEC mode 5-2 V voltage range C-1 W warnings 2-2, A-1 Web-based interface common buttons 4-4 compatible browsers 4-1 web site, Cisco Software Center 3-9, 6-13 weight C-1 WEP key 6-5

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 D-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 APPENDIX D Channels and Power Levels This appendix lists the IEEE 802.11b/g (2.4-GHz) and the IEEE 802.11a (5-GHz) channels and maximum power levels supported by the world’s regulatory domains. The following topic is covered in this appendix: • Channels and Maximum Power Levels, page D-2

  • CISCO CONFIDENTIAL - Draft 2 B-6 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Appendix B Declarations of Conformity and Regulatory Information Guidelines for Operating Cisco Aironet Access Points in Japan Guidelines for Operating Cisco Aironet Access Points in Japan This section provides guidelines for avoiding interferen

  • CISCO CONFIDENTIAL - Draft 2 Index IN-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 frequency range C-2 G global configuration mode 5-2 H help, for the command line 5-3 history changing the buffer size 5-4 described 5-4 disabling 5-5 recalling commands 5-5 Home button 4-4 I indicators 6-2 input power C-1 installation guideli

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 A-4 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Appendix A Translated Safety Warnings Statement 1001—Work During Lightning Activity Warning Statement 1001—Work During Lightning Activity Warning Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmall

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 4-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 4 Using the Web-Browser Interface Using the Management Pages in the Web-Browser Interface Figure 4-1 shows the web-browser interface home page. Figure 4-1 Web-Browser Interface Home Page

  • CISCO CONFIDENTIAL - Draft 2 iii Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 CONTENTS Preface ix Audience ix Purpose ix Organization ix Conventions x Related Publications xii Obtaining Documentation xii Cisco.com xii Documentation CD-ROM xiii Ordering Documentation xiii Documentation Feedback xiii Obtaining Technical Assistance xiv Cisco.c

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 x Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Preface Conventions Chapter 4, “Using the Web-Browser Interface,” describes how to use the web-browser interface to configure the access point. Chapter 5, “Using the Command-Line Interface,” describes how to use the command-line interface (CLI) to configure the access point. Chapter 6, “Troubleshooting,” provides troubleshooting procedures for basic problems with the acc

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 5-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 5 Using the Command-Line Interface Getting Help Getting Help You can enter a question mark (?) at the system prompt to display a list of commands available for each command mode. You can also obtain a list of associated keywords and arguments for any command, as shown in Table 5-2. Abbreviating Commands You have to enter only enough characters for the access point to recognize the command as unique. This example shows how to enter the show configuration privileged EXEC command: ap# show conf Using no and default Forms of Commands Most configuration commands a

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 2-6 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 2 Installing the Access Point Before Beginning the Installation • Padlock hole—used to attach a padlock to secure the access point to the mounting plate. Compatible padlocks are Master Lock models 120T and 121T or equivalent. The security hasp adapter can also be used with the padlock for increase security protection. Note The security hasp covers the cable bay area ( including the power port, Ethernet port, console port, and the mode button) to prevent the installation or removal of the cables or the activation

  • Cisco 1130AG - Aironet - Wireless Access Point, CHAPTER CISCO CONFIDENTIAL - Draft 2 1-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 1 Overview Cisco Aironet 1130AG Series Access Points provide a secure, affordable, and easy-to-use wireless LAN solution that combines mobility and flexibility with the enterprise-class features required by networking professionals. With a management system based on Cisco IOS software, the 1130 series access point is a Wi-Fi certified, wireless LAN transceiver. The access point contains two integrated radios: a 2.4-GHz radio (IEEE 802.11g) and a 5-GHz radio (IEEE 802.11a). You can configure the radios separately, using different settings on each r

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 Glossary GL-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 BPSK A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 1 Mbps. broadcast packet A single data message (packet) sent to all addresses on the same subnet. C CCK Complementary code keying. A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 5.5 and 11 Mbps. cell The area of radio range or coverage in which the wireless devices can communicate with the base station. The size of the cell depends upon the spe

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 E-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Appendix E Console Cable Pinouts Overview Overview The access point requires a special serial cable that connects the access point serial console port (RJ-45 connector) to your PC’s COM port (DB-9 connector). This cable can be purchased from Cisco (part number AIR-CONCAB1200) or can be built using the pinouts in this appendix. Console Port Signals and Pinouts Use the console RJ-45 to DB-9 serial cable to connect the access point’s console port to the COM port of your PC running a

  • Cisco 1130AG - Aironet - Wireless Access Point, CISCO CONFIDENTIAL - Draft 2 6-10 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 6 Troubleshooting Reloading the Access Point Image Using the Web Browser Interface Follow these steps to delete the current configuration and return all access point settings to the factory defaults using the web browser interface. Step 1 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x). Step 2 Enter the access point’s IP address in the browser address line and pre

  • CISCO CONFIDENTIAL - Draft 2 Glossary GL-5 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 roaming A feature of some Access Points that allows users to move through a facility while maintaining an unbroken connection to the LAN. RP-TNC A connector type unique to Cisco Aironet radios and antennas. Part 15.203 of the FCC rules cover

  • CISCO CONFIDENTIAL - Draft 2 2-14 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-6226-01 Chapter 2 Installing the Access Point Mounting Above a Suspended Ceiling Step 2 Place the clip over the T-bar box hanger (refer to Figure 2-10) and secure it to the access point mounting bracket with the 1/4-20 fastener (supplied with the T-bar hanger). Figure 2-10

Related Products and Documents (Wireless Access Point):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Allen-Bradley 1771-OBN Installation instructions allen-bradley/1771-obn-BBJ.pdf 03 Jan 2024 4
2 Base SWM300A Operation & user’s manual base/swm300a-14P.pdf 10 Jun 2023 7
3 imagistics im3511 Operation & user’s manual imagistics/im3511-1L8.pdf 23 Dec 2023 6
4 Samsung GT-I9003 Service manual samsung/gt-i9003-45G.pdf 25 Mar 2024 86
5 Origin SUB8 Installation manual origin/sub8-8XQ.pdf 21 Aug 2022 11
6 Smeg KFV92 Instruction manual smeg/kfv92-33N.pdf 15 Nov 2023 10 0.52 Mb

Similar Resources:

  • Tosibox

    Lock 200

    (2 pages)
    Lock 200 Quick Start Guide v1.4Copyright © Tosibox Oy, 2015Serializing the Lock and KeyDeploying into Broadband Networks1. Connect an internet-connected ethernet cable to the Lock’s WAN port .2. Plug the devices into the Lock’s LAN ports (LAN 1-3). If the devices have static IP addresses, Deploying the Lock in the TOSIBOX® user manual.12aT …
  • WiNetworks

    WiN5213-2

    (53 pages)
    M/N: MDOC-CPE4310 Version: 4.3 Revision: 1.1 Date: July 2008 User’s Manual & Installation Guide for: WiN5200 Series Outdoor CPE WiNetworks Win-MaxTM 802.16e …
  • Gembird

    WNP-RP-001

    (16 pages)
    USER MANUALHANDBUCHHANDLEIDINGMANUEL DESCRIPTIFРУКОВОДСТВО ПОЛЬЗОВАТЕЛЯКЕРІВНИЦТВО КОРИСТУВАЧАWIFI REPEATER, 300 MBPSWIFI-REPEATER. 300 MBPSWIFI VERSTERKER, 300 MBPSRÉPÉTEUR WIFI, 300 MBPSРЕТРАНСЛЯТОР WIFI СИГНАЛОВ, 300 МБИТ/СЕКРЕТРАНСЛЯТОР WIFI СИГНАЛІВ, 300 МБИ …
  • Cohda Wireless

    MK5 RSU

    (5 pages)
    Cohda Wireless Pty Ltd Confidential Information 1 MK2 / MK3 ASD Quick Start (Tablet / Mobile Phone) MK5 User Manual – Annex A RSU Quick Start Version: 0.1 …
  • Mist

    AP41

    (14 pages)
    1 AP41 Hardware Installation Guide Mist Systems (C) Copyright 2016. All Rights Reserved AP41 Hardware Installation Guide Overview The Mist AP41 delivers 4x4 MIMO with four spatial streams when operating in multi-user (MU) or single-user (SU) mode that supports the IEEE 802.11ac Wave 2 specification. …
  • Xentino

    C540

    (4 pages)
    [Type text] Xentino Technologies Corp. www.xentino.com Product Overview C540 is an Qualcomm Chipset high power industrial Ceiling Wireless Access Point with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), support Wave2, equipped Gigabit WAN &am …

Comments, Questions and Opinions: