Manualios.com

Clear Spot Voyager IMW-C910W Operation & User’s Manual

  • Spot Voyager IMW-C910W Wireless Router
  • maUnOOW6DTMo.
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 25

Clear Spot Voyager IMW-C910W Manual Online:

3.7, 1821 votes
Clear Spot Voyager IMW-C910W User Manual
Clear Spot Voyager IMW-C910W User Guide
Clear Spot Voyager IMW-C910W Online Manual

Text of Clear Spot Voyager IMW-C910W User Guide:

  • Setting of USB (RNDIS) Notice : 1. Your PC connected to web server of IMW-C910W through WiFi. 2. Driver of RNDIS can down load from web sever of IMW-C910W. 3. Refer to USB Driver Page No. XX for download. Setting with Window XP 1. IMW-C910W should be connected with PC by USB cable. 2. Below is each step of RNDIS installation.

  • Clear Spot Voyager IMW-C910W, The points of name & Components list Components List in the package. ① IMW-C910W ② Adaptor [5V / 2A] (Optional) ③ User’s Manual ④ Plug ⑤ USB Cable Points of name & Function ① USB Port : Battery charging and Tethered operation ② Power button: Power turn Om/Off 1 2 3 4 5

  • Setting with Window 7 <Start><Control Panel><Network and Internet><Connect to Network> Choose the WiFi AP of IMW-C910W in the list Setting with Mac OS Click the wireless Icon on the menu  Choose the WiFi AP of IMW-C910W in the list

  • Clear Spot Voyager IMW-C910W, Chapter 4 Configuring CM Connect to Web CM (Web Connection Manager) Start CM - Use web browser to connect Web CM - Type Address 192.168.1.1/admin ※ Microsoft Internet Explorer is recommended Input ID/Password - A Pop-up window will requests for specific ID and Password to enter into Web CM ID : admin / Password : admin Description of Web User Interface Introduction This is to describe user interface of Biscuit

  • Clear Spot Voyager IMW-C910W, ① Main Menu Main Menu help user to choose settings of LAN/WLAN, WiMAX frequency, Authentications, Device management. ② Sub Menu Sub Menu shows detail categories of Main Menu ③ Main Window Main Window shows status of device or setting parameters ④ Help Display It shows additional description of Main Window Home Menu ① Device Information It shows description of Device such as name of device, manufacturer, software version, hardware version, API version and MAC address ② LAN information

  • Clear Spot Voyager IMW-C910W, ※ Example: EAP-TLS 1. Select ① as Enable 2. ② Select EAP-TLS 3. ③ Register Root CA Certificate 4. In case there is Sub CA Certificate, register in ④ 5. ⑤ Register Client Certificate file 6. ⑦ Input private password 7. ⓐ input Outer NAI (Anonymous ID) (ex:[email protected] or MAC [email protected]) 8. Select ⓒ to save configuration 9. Click ‘Reboot’ in main window ※ Example: EAP-TTLS 1. Select ① as Enable 2. ② Select EAP-TTLS/MSCHAPV2 (Select TTLS provided from NAP) 3. In case there is Root CA Certificate, register with ③ 4. In case there is

  • Clear Spot Voyager IMW-C910W, - Device Status: This indicates connection status of WiMAX device. - BSID: This indicates BSID of WiMAX network. - NAP(Network Access Provider): This indicates operator’s ID. - Frequency: This indicates connected frequency. - IP Address: This indicates Static IP Address acquired from BS. - Subnet Mask: This indicates Static Subnet Mask acquired from BS. - Default Gateway: This indicates Gateway acquired from BS. - First DNS: This indicates the first DNS acquired from BS. - Second DNS: This indicates second DNS acquired from BS. ● Service Flow - This indicates QoS status information of device in detail. Device Information ● Device I

  • Clear Spot Voyager IMW-C910W, - Key Pass Phrase: WEP Key is generated automatically. Input random character to generate key. Please make a separate note the key in order to connect to the device. - WPA: The WPA protocol implements the majority of the IEEE 802.11i standard, and was intended as an intermediate measure to take the place of WEP while 802.11i was prepared. This Device provides WPA, WPA2 and USB both. - WPA Type : This Device provides WPA, WPA2. ▶ WPA(Wi-Fi Protected Access) : WPA protocol implements the majority of the

  • Clear Spot Voyager IMW-C910W, Table of list Chapter 1. Attention ................................................................................................................................................ 4 Chapter 2. Introduction & Requirements ........................................................................................................ 4 Introduction of goods ......................................................................................................................................... 4 What is the IMW-C910W? ............................................

  • Clear Spot Voyager IMW-C910W, ③ Battery Status : battery status and power (Color : Yellow / Green / Red) ④ WiFi Status: WiFi On/Off Status USB Port : (Color : Green) ⑤ WiMAX Status: WiMAX Signal strength (Color : Yellow / Green / Red) LED Status Scenario WiMAX Signal LED Off Power Off Yellow LED On and Off Frequency scanning or ready Red LED On and Off Connecting with WiMAX network Red LED On WiMAX signal level 1 Yellow LED On WiMAX signal level 2 ~ 3 Green LED On WiMAX signal level 4 ~ 5 WiFi LED WiFi AP turn On Green color Power LED Remained battery (100% ~ 60%) Green color Remained battery (60% ~ 30%) Yellow color Remain

  • Clear Spot Voyager IMW-C910W, Setting of the WiFi AP Notice : Configuration of WiFi AP has to be set to “Obtain IP address and DNS sever address automatically”. Setting with Window XP <Start><Connect to><Wireless Network Connection> Choose WiFi AP of IMW-C910W in the list

  • Clear Spot Voyager IMW-C910W, Chapter 3. How to use the IMW-C910W Power ON/OFF Power ON : Push the power button for 3 Seconds. Power OFF : Push and hold the power button for 20 Seconds. How to charge battery The built-in battery can be charged from either USB cable or wall Charger (Optional)

  • Clear Spot Voyager IMW-C910W, LAN② setting information - This provides IP Address, Subnet Mask and DHCP Server setting information WiMAX③ status information - This provides WiMAX connection status information. Firmware information - kernel version: This indicates version of device OS - rootfs version: This indicates system file version - firmware version: This indicates software (firmware) version - WCM version: This indicates Web CM version Administration setting NTP Setting① - Enable NTP Client: In case of using NTP Client, enable check box of Enable NTP client - NTP S

  • Clear Spot Voyager IMW-C910W, Setting with Window 7 1. IMW-C910W should be connected with PC by USB cable. 2. Below is each step of RNDIS installation. <Start><Control Panel><Network and Internet><Connect to Network>

  • Clear Spot Voyager IMW-C910W, Upgrade description ① This is to return to factory default configuration. ② Device supports firmware update with binary file - When check box of Keep WiMAX config files is selected, the previous configuration will remain after update - After selecting file and click ‘update’ to start upgrade ③ Device supports zImage file update ④ Device supports ramdisk.jffs file update ⑤ Device supports Parameter bin file update ⑥ Device supports VPOS bin file update FOTA URL ⑦ setting - FOTA URL: Input URL of the site and save click to restore - When Enable Au

  • Clear Spot Voyager IMW-C910W, Description of Web User Interface ............................................................................................................ 12 Introduction .................................................................................................................................................... 12 Home Menu ................................................................................................................................................... 13 LAN settings ....................................................................................................................................................... 15 WiMAX Configuration

  • Clear Spot Voyager IMW-C910W, - This indicates antenna level information of device ● PHY Statistics Information - This indicates statistics of antenna level of device. ● PHY Burst Statistics Information - This indicates modulation information of device. Network Information description ● Auto Refresh : When check box is enabled, Network and MAC status of device in monitored in real time. ● WiMAX Link Status

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 HP Pumpkin AG-2 Assembly manual hp/pumpkin-ag-2-2KN.pdf 17 Aug 2023 15
2 Dunlop MXR Phase 45 Operation manual dunlop/mxr-phase-45-1AG.pdf 21 Oct 2023 2
3 Webasto MultiControl Operating instructions manual webasto/multicontrol-X2O.pdf 22 Aug 2022 56
4 Edelbrock 2917 Nstallation Instructions edelbrock/2917-nstallation-9UX.pdf 12 Nov 2022 1 0.02 Mb
5 Roland V-Synth GT Supplementary manual roland/v-synth-gt-F25.pdf 12 Mar 2024 21 0.48 Mb
6 Alesis QS7 Reference manual alesis/qs7-Z11.pdf 15 Jun 2023 141 0.9 Mb

Similar Resources:

  • Polycom

    Polycom VVX 500

    (8 pages)
    Quick Start Guide Polycom VVX 500 12-Line Desktop Phone with HD Voice Polycom VVX 600 16-Line Desktop Phone with HD Voice VVX500 pictured …
  • Cisco

    Catalyst IR1800 Rugged Series

    (92 pages)
    Cisco Catalyst IR1800 Rugged Series Router Hardware InstallationGuideFirst Published: 2021-02-03Last Modified: 2021-07-02Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883 …
  • HP

    635n - JetDirect IPv6/IPsec Print Server

    (37 pages)
    1 Practical IPv6 Deployment for Printing and Imaging Devices May 2008 Table of Contents: Introduction ..................................................................................................................................... 1 IPv6 – Truths, Myths, and Practical Considerations............................................................. …
  • KVH Industries

    TracNet 100

    (2 pages)
    Congratulations! You have chosen the KVH TracNet™100Mobile Internet Receiver, your gateway to Microsoft’sMSN®TV service and the Internet when you’re on the go.This guide provides basic setup instructions to get you upand running in just a few minutes. For detailed installation, setup, and troubleshootinginformation, refer to the TracNet 100 User’s G …
  • D-Link

    DWA-520

    (24 pages)
    WIRELESS 108G DESKTOP ADAPTERDWA-520Quick Installation Guide+Руководство по быстрой установке+Guía de Instalación Rápida+Guia de Instalação Rápida+快速安裝指南+Petunjuk Pemasangan Cepat+ …
  • CARRY TECHNOLOGY

    ComWi

    (16 pages)
    Carry Technology ComWi Quick Guide ComWi (DW06) Quick Guide Copyright © 2011, Carry Technology Co., Ltd. All Right Reserved …

Comments, Questions and Opinions: