CraftUnique CraftBot Operation & User’s Manual
|
CraftUnique CraftBot, 35 The first steps LOADING THE FILAMENT (continued) Changing or removing the current filament already fed into your CraBot’s extruder If you intend to change the color or filament type first of all take warning that forcefully pulling it from a cold extruder could potentially damage vital components. To remove the filament correctly, the extruder must be heated. Once the filament has cooled it will leave a thicker section of previously melted material in the extruder itself, creating a certain “knot” that acts as an anchor when trying to retrieve it cold. It simply won’t fit back out of the passage way. To r
CraftUnique CraftBot, The guarantee and warranty does not cover any alterations or repairs made by a second or third party. We are always eager to work with you personally to fix any problem that may arise in the most eicient fashion meeting it’s specific case, but we do not suggest you to “rig” up something outside of the recommended guidelines in your user manual unless personally instructed by us to do so. We provide no guaranties on the safety or performance of modified CraBot 3D print- ers. We are also not responsible for incorrect voltage being used, environmental conditions (moisture, fire, wate
32 The first steps LOADING THE FILAMENT Loading the filament • Remove the the filament guide tube from the insert hole in the top of the extruder. • Insert the filament from the spool into the end of the filament guide tube where it attaches to the filament guide tube holder. • Push the filament all the way through the filament guide tube. • Insert the end of the filament into the
This is the menu that you will see appear when you first power up the CraBot 3D printer. By using the “back” button (or in completion of a process) in any of the following displays you can always return to this one. From this display you can view the current temperature of both the extruder and the bed. It will also let you know if you are rea
CraftUnique CraftBot, 27 The first steps NAVIGATING THROUGH THE LCD MENU Touch the “USB Print” button with the pendrive icon to precede to the next display. At this point, if you have already inserted a USB card into the top of the CraBot, you will see a list of the contents. If the USB pendrive is not inserted into the top of the CraBot to begin with, the initial icon will appear grey, and all further actions will be disabled. In this case though, it is possible to print using CraWare and a connection to a host computer through the USB port located on the right hand side of your CraBot. Use the up and down arrow buttons to scroll through the possible prints. Once you find one t
CraftUnique CraftBot, 9 Setting up your CraBot UNPACKING YOUR CRAFTBOT 1. Place the CraBot box on the ground on a level surface. Make sure that there is a lot of open space around you. Open the box, make sure not to damage the contents if using a blade. You will find the quickstarter guide, along with the invoice, located within the top protective foam insert. Remove these. 2. You will then find the insert cradle which contains the accessories and filament spool. The cradle also acts as a support for the extruder during shipping. The CraBot user manual can also be found on the pendrive with the accessories. We recommend that you use this users manual to guide
CraftUnique CraftBot, 17 Setting up your CraBot INSTALLING THE FILAMENT GUIDE TUBE (continued) Locate the filament guide tube. Push the filament guide tube into the filament guide tube holder and push the other end into the hole on the top of the extruder. Install the filament guide tube. 2
*Always operate the CraBot 3D printer with the utmost care, for both the machine and the user’s wellbeing. Respect the machine! *Never force anything, whether it be during unpacking, setup, operation, service. Never! *Never reach inside the machine when turned on. Dierent parts of the machine (mainly the extruder and heated buildplate) operate at very high t
CraftUnique CraftBot, 31 The first steps HOW TO LEVEL THE BED/HEATED BUILD PLATE By moving forward via the touchscreen, the extruder will first of all go to the “home” or zero position as a reference. From here it will move directly above the center knob and will ask you to “Adjust the front knob under the extruder until the spacer card slides freely but with just a small amount of resistance between the nozzle and the extruder”. To move the bed closer to the extruder, turn to the le and decompress th
CraftUnique CraftBot, 20 Setting up your CraBot ATTACHING THE USB CABLE 1. Take the USB-A to USB-B cable from the accessories. Insert the USB cable into the USB-B port on the right side of the CraBot. You can attach the other end of the USB cable directly into your computer.
CraftUnique CraftBot, The GCODE visualizer 6 CRAFTWARE AND 3D MODELING When the gcode is ready, you can overlook it in the 3D gcode viewer. With the sliders you can go layer by layer and gcode by gcode and see how CraBot will print your object in real life. When you are satisfied and ready, press the “Print“ button. 40 Craing an object with CraWare
CraftUnique CraftBot, 45 Maintenance LUBRICATING THE CRAFTBOT 3D PRINTER Power up your CraBot once again and move the build plate to the lowest point (“Axes” menu, home position and then go to the directional menu and press the Z down arrow until the bed reaches the lowest point). Turn the CraBot printer o and unplug it from the electrical outlet. Place a second clean rag on top of the heated build plate to protect the components and Kapton from any overspray. Repeat the process for the top side of the Z-axis rods the same as you performed on the bottom side: protective rag behind threaded rod, spray, wipe excess lubricant on other two outside rods.
CraftUnique CraftBot, Generate the necessary toolpath information needed to print 5 To print a 3D object CraBot needs toolpath information generated from 3D object files like .obj or .stl. Toolpath information is simply called gcode. Before generate gcode, select the print quality and the material you are using. CRAFTWARE AND 3D MODELING 39 Craing an object with CraWare
CraftUnique CraftBot, 26 The first steps NAVIGATING THROUGH THE LCD MENU Click on the button in the main menu display with the X, Y and Z meeting by three lines in the center, and you will be redirected to the Axis/Axis control menu. The first “back” button will, of course, return you to the main menu. Moving to the right, the next button looks like a house, and is the “home” icon. When clicking on the “Axes” button in the main menu, you will be automatically directed to this display. From here you can reset the extruder and the bed, or heated build plate, to the “home”, or �
CraftUnique CraftBot, 9 Welcome SPECIFICATIONS PRINTING Printing technology: Fused Filament Fabrication (FFF) Build volume: 25x20x20 cm Layer resolution: 100 micron (high) 200 micron (medium) 300 micron (low) Position precision: X,Y: 4 micron Z: 2 micron Filament diameter: 1.75 mm Nozzle diameter: 0.4 mm Print speed: 50mm/s SOFTWARE Soware package: CraWare File types: STL/OBJ/CWPRJ Supports: Windows (XP 32bit/7+) Mac OSX PHYSICAL DIMENSIONS Frame dimensions: X: 40 cm Y: 36 cm Z: 37 cm With all parts attached even filament guide tube: X: 40 cm Y: 46 cm Z: 55 cm Shipping box: X: 46 cm Y: 42 cm Z: 43 cm Weight: 14 kg Total shipping weight: 17 kg TEMPERATURE Ambient temperature: 15-32 °C Storage temperat
CraftUnique CraftBot, *The CraBot should be operated on a flat and even surface parallel with the ground. *CraBot should never be used in high traic footpaths, or any footpath or walk- way for that matter. It should not be used in any area were any outside interfer- ence to the unit could occur. *Keep small children away from the CraBot printer, as moving parts could be at- tractive to them. Although, children can receive great educational benefits from CraWare and the CraBot 3D printer, the mechanism itself is not a toy, but rather it is a tool. Serious injuries can result if CraBot is not regarded in this w
CraftUnique CraftBot, 44 Maintenance LUBRICATING THE CRAFTBOT 3D PRINTER If you look beneath the build plate you will see three rods that run vertically in which the build platform moves up and down on. The two outside rods are smooth and the center rod is threaded. These three rods are known as the “Z-axis rods”. Place a folded paper towel, or a lint-free rag, behind the center threaded Z-axis rod. This rag is used to protect other areas of the printer from any overspray that may occur. AREAS OR PARTS OF THE CRAFT
CraftUnique CraftBot, 29 The first steps NAVIGATING THROUGH THE LCD MENU Bed Leveling: Find the button with the three crossed circles (which represent the three knobs and screws used to raise and lower the heated build plate). Touch the button and you will be directed to another display in which you will be walked through the process step-by-step. Aer completing the steps, use the forward button to navigate back to the CraBot settings. Use the back button at any time to return all the way to the main menu. Scale of Temperature: Look for the button with the °C/°F symbol, and select it. Every time that you touch the button, the scale will change from either Fahrenheit to Celsius
CraftUnique CraftBot, 28 The first steps NAVIGATING THROUGH THE LCD MENU Find the icon with the gears, “Settings”, found in the main menu and select it. Here you will see the information containing the current firmware version uploaded to the CraBot (HMI version/pr3Dator version). At the bottom of the screen you will find a whole bunch of dierent options which you can use to set up your CraBot in the way that you see fit. You can find even more options by using the forward button located in the lower right hand corner. I’ll give you a run-down, item by item...
DOWNLOAD |
GiantArm D200 3D Printers Operation & user’s manual
D200 |
TAZ TAZ 3D Printers Quick start manual
TAZ |
CraftUnique CraftBot Plus 3D Printers Service manual
CraftBot Plus |
CEL Robox 3D Printers Quick start manual
Robox |
Toolots HCmaker20 3D Printers Operation & user’s manual
HCmaker20 |
CraftUnique CraftBot 3D Printers Operation & user’s manual
CraftBot |
Arduino MATERIA 101 3D Printers Operation & user’s manual
MATERIA 101 |
CraftUnique CraftBot XL 3D Printers Installation manual
CraftBot XL |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Zte | T-Mobile Aspect | Operation & user’s manual | zte/t-mobile-aspect-4V4.pdf | 15 Jul 2022 | 42 | 6.89 Mb |
2 | Technaxx | Aqua TX–42 | Operation & user’s manual | technaxx/aqua-tx-42-P1M.pdf | 05 Aug 2023 | 64 | |
3 | Celestron | 21051-W | Instruction manual | celestron/21051-w-7Q1.pdf | 24 Jul 2022 | 8 | 0.4 Mb |
4 | Lenovo | 3000 K100 | Hardware maintenance manual | lenovo/3000-k100-E3M.pdf | 27 May 2023 | 100 | |
5 | Casio | CTK-230 | Operation & user’s manual | casio/ctk-230-273.pdf | 09 Jan 2024 | 51 | 2.01 Mb |
6 | Atlona | AT-UHD-EX-100CEA-KIT | Operation & user’s manual | atlona/at-uhd-ex-100cea-kit-238.pdf | 30 Apr 2023 | 15 |
MUTOH
CSTM-XPJ16xxSR(E)_1.00 CONFIDENTIAL Page. To Table of Contents 1 MUTOH INDUSTRIES LTD Training Manual History Rev.1.00 26.July.2019 Rev. 1.00 Date 26.July.2019 Date ◆First version
…
XpertJet XPJ-1641SR(150 pages) |
XYZ Printing
-1-(US)XYZprinting, Inc.• Website: http://us.xyzprinting.com• Online Customer Service Desk: http://support.xyzprinting.com/us_en/Help/ticket/home↓↓USB Wire PortPower JackProduct Overview and AccessoriesQuick Start GuidePlease read this guide carefully for steps of unpacking, setting up, printing, post processing and printer maintenance to ensure your …
Nobel Superfine(2 pages) |
SeeMeCNC
Rostock MAX v2 Assembly GuideWelcome to the Assembly Guide for the Rostock MAX v2.0 3D printer.Version 2.53, September 28th, 2016Second EditionCopyright 2015 by Gene BuckleLicensed as Creative Commons Attribution-ShareAlike 3.0Questions or corrections should be emailed to [email protected]
…
Rostock MAX v2(314 pages) |
MUTOH
1 VJ1626UHE-I-01 VJ-1626UH INSTALLATION MANUALPlease read this manual before usingThank you for purchasing a MUTOH product.This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH Full-color inkjet printer VJ-1626UH.This manual is intended for owners, installers, and users of this product.Understand the contents …
VJ-1626UH(16 pages) |
SainSmart
[email protected] of SainSmart.com. Unlawful to copy or reproduce in any manner without the express written consent.SainSmart Coreception 3D Printer Trouble Shooting1. Cura settings (specifically print head size settings and why they are)There is a known bug for the x-min and the y-min. These settings are used to set the hotend s …
Coreception(11 pages) |
ProJet
Quick Start Guide ProJet® MJP 5600 Quick Start Guide Rev B Original InstructionsPlease refer back tohttp://infocenter.3dsystems.com/projetmjp5600/quick-start-guide for the most up-to-date Quick Start GuideIntroductionCongratulations on the purchase of your new ProJet® 5600 3D Professional Printer! ThisQuick Start Guide has the use and safety information yo …
MJP 5600(38 pages) |
Kenyon International Cooktop KISSKenyon International Cooktop Instruction manual (File: kenyon-international-kiss-instruction-manual-22, Thursday 09-11-2023) KISS, 22 |
Magnetek Transmitter Flex VUETransmitter #5S455B Flex VUE, 43 |
MULTIQUIP Saw 13HPMULTIQUIP Saw 13HP Operation and parts manual 13HP, 152 |
Makita Vacuum Cleaner CL070DVacuum Cleaner PDF Instruction manual CL070D, 44 |
STIEBEL ELTRON Remote Control FFB1FFB1 Operating instructions manual - WJX7K2 FFB1, 8 |
D-Link Switch D DSB-H4 DSB-H4D-Link D DSB-H4 DSB-H4 User Manual (Operation & user’s manual), @2W9B3N D DSB-H4 DSB-H4, 6 |
Canon Digital Camera 2664B001Canon Digital Camera Technical specifications (File: canon-2664b001-brochure-3, Tuesday 27-02-2024) 2664B001, 3 |
BSS Audio Mixer BLU-102Mixer Installation manual (BSS Audio BLU-102) BLU-102, 12 |
Radiosistemi Motorized Toy Car CARRARA Z9Radiosistemi CARRARA Z9 Manual (Manual ), @AOU21X CARRARA Z9, 46 |
Snell Amplifier IQSDA32#L12AC8: IQSDA32 Amplifier User instruction manual IQSDA32, 27 |
RocketFish Surge Protector RF-PCS12ES13RF-PCS12ES13 Manual d'installation rapide - 6X56T3 RF-PCS12ES13, 2 |
Profoto Camera Accessories AcuteB2 600 AirSPDF Guide (@1F8O46), Profoto AcuteB2 600 AirS Camera Accessories (09/11/2023) AcuteB2 600 AirS, 27 |