CTC Communications FDM Series Manual
|
CTC Communications FDM Series, 25 In this interface you must select the printer model of "The Replicator (Dual)".in the option of “Export for ”then , select Left or Right according to your materials. The tool “Raft” is used to render on the material-bearing printer before you print. Supports tool is used for adding support materials automatically by the software of the floating graphic so as to make sure to finish the printing successfully. There are three options in the resolution tool.You can select different printing pr
CTC Communications FDM Series, 12 (11) Click the Finish button, then the "Next" button in the main page begin to lit. Left-click the "Next" button, then the Replicatorg printing software installation was completed. 3.2.2 Software Description (1) Connect the machine to the electricity supply., then connect USB and open replicator, (Choose The Replicator Dual machine for the first double nozzles and the Replicator Single for the first single nozzle)
CTC Communications FDM Series, 5 First generation Second generation 2.3 Product Specifications 2.3.1 Parameters The total volume of printers :320*467*381mm Package Size:565*430*535mm Weight (with packaging) : 13.5KG Build Size :225*145*150mm Power:210V Build platform’s temperature: about 110 (proper winter heating and summer cooling) Extrusion nozzle flow: about 24cc / h
CTC Communications FDM Series, 23 3.2.4 Software Description (1) Makerware software function interface. (2) Function keys Description: Viewer Tool Placed Tool of File Location Rotary tool Adjustment tool of File Ratio object tool Adding tool File slicing generation tool Save tool
CTC Communications FDM Series, 10 (5) Click “ automatic installation” in Replicatorg software .When a icon be shown then click the “Next ”button. (6)Another icon will be shown after click the “Next” button ,then click the “install” button. (7) A window will jump out after the install button, please wait a minute at this time.
31 Printing platform adjustment Select"Lever Build Plate"to level the print platform and then follow the prompts on the screen. Return to origin Select"Home Axes"to control the nozzle so as to return the position of mechanical origin Jog mode Select"Jog mode"to enter the jog control interface(Figure 7),use the"◄"and"►&q
CTC Communications FDM Series, 7 Check whether there are some deformations caused by squeezing or rupture in the corners of the box. (2) Open the box and remove the printer then cut the nozzle and fix tie (tied to the front left side of the Z-axis X-axis Y-axis. Cut fixed print head straps with water-nose pliers. (3) Open the foam of the surface of print head (Note: Try not to use the face of knife so as to prevent the print head was hanged up ) Mount the print head to a bracket on the X-axis, installation direction as shown ,then tighten the two screws. (Picture1) (
28 After pressing the save bottom, a progress bar will show at the lower right of the software When the progress bar disappears , you can copy the file generated into the X3hG format with SD card in the place of saving the file 。 And then you can insert it into the printer and start printing. 3.3 The instructions of the key of LCD screen "▲": For moving th
CTC Communications FDM Series, 21 (9) After clicking, the computer will appear five Prompts . Please click "Install this driver software anyway." (10)After Clicking "Install this driver software" button five times, the installation procedure is completed basically,while a dialog box will pop up . Please check carefully if all the programs are installed. (check method: examine the bar of Driver Nane , if all things are matching that means the software is installed successfully, if
CTC Communications FDM Series, 38 covered by warranty. (5) The products will be issued an invoice cannot be returned, only quality replacement. 4 .Care the product: the end (1) After the printing job has been done, you should try emptying nozzle and residual printing supplies extruder to avoid the next print nozzles will sum game, which is a basic 3D printer maintenance. Note: If you use other manufacturers and distribution of supplies caused by the nozzle sum game, will no longer be within the scope of the warranty. (2) Rail can be added the preservative lubricant each month. (3) Do not print directly in the printing proc
CTC Communications FDM Series, 33 The version number Select "Version Number", then you can view the version number.of the operation of the software Restore Default Settings Select "Restore Default", you can restore the factory parameter settings 4. Take out model Use the rasp to gently tilt the bottom of the object, so that the printed article can slowly leave the heating platform.Try not to move it with your hand 5.Maintain 5.1 clean the print head The print head has to be cleaned after the
CTC Communications FDM Series, 22 there are X number or! number that means installation is unsuccessfully.Finally, click "Finish." (11) Click the Finish button, then the "Closet" button in the main page begins to lit. Left-click the "Close" button, then the Makerware printing software installation was completed.
CTC Communications FDM Series, 18 Please note, it won't continue to down to the bottom of the surface at the place of 10mm until the temperature arrive at a predetermined value when we print. 3.2.3 Install the driver software of Makerware (1) take out SD card and read the printer driver inside it , looking for the folder of 3dsetup (2) Open 3dsetup folder and look for the file of software (3) Right-click the file of the software and then enter into the software installation manager ( 4 ) Click “ Makerware ”.There will be software-driven system t
CTC Communications FDM Series, 35 (Y-axis on the right belt) (X-axis belt) (Y-axis on the left belt) 5.3 maintenance of the optical axis and the screw rod Using much better lubricant, spread the lubricant on the above of XYZ bearing steel, coated measurement should not be too much, just a little on the surface to make lubricant oiling. Figure (2345) (Figure 1) (Figure 2) (Figure 3)
CTC Communications FDM Series, 2 Catalogue 1.Instructions ..................................................................................................................................... 3 1.1 Introduction ................................................................................................................................. 3 1.2 Precautions .................................................................................................................................. 3 1.2.1 Safety Precautions ..................................................................
CTC Communications FDM Series, 37 7.8 sticky silk material is above the nozzle - support material is pulled by nozzle - re-set parameters 7.9 no wire - the model in question - after repairing the model code and reset the parameters the code numbers 7.10 driver or software could not install - system configuration problem - reinstall the system 7.11 print sample does not stick platform - too much distance between the nozzle and the platform – readjust the platform 7.12 blue tape is difficult to take down - Platform heating and when it is heated into are 20-degrees or 30 degrees , you can take down completely. 8. Warranty and License Agreement affirms
CTC Communications FDM Series, 29 parameter settings Exit menu Exit menu Return to main menu Main menu Connected to electricity , the main menu will show http://translate.google.cn/, just like the picture 1.By ▲"and"▼"key to move to move the cursor, then press the"M"key to enter the selected item. Picture 1 Main menu Print with SD card Select "Build from SD" and then enter into the SD card file to skim (see picture 2).By "▲" and "▼" key to move the cursor, press the "M" button to select the file you want to print and start printing. Picture 2 SD card file selection Select "Pr
CTC Communications FDM Series, 24 。 (Note: Before all tools are used , left-click the file until the outline color is changed Examples are as follows and the picture 2 is the correct one. Picture I (opened but not click the Select button) Picture2 (opened and clicked the Select button) ( 3 ) When the slice generates into parameters , use tool and open a STL file , then use tool and place the file onto the level panel.use tool to adjust it to the best angle for printing.When the file exceeds the maximum printing size and can not be placed , you can use tool to reduce or enlarge proportionally.After finishing the
15 Set the nozzle temperature : set enter key in the box of Target Tempriture Due to different temperature conductivity of different machines, there are a relatively large differences between the temperature. It would be best to try out the wire from 215 degrees,. The temperature rises rapidly, reaching 190 degrees, indicating the large heating allowance, otherwise the small
CTC Communications FDM Series, 11 (8) After clicking the Install button ,there is a dialog box, then click the next button. (9) After clicking, the computer will appear five Prompts . Please click "Install this driver software anyway." (10)After Clicking "Install this driver software" button five times, the installation procedure is completed basically,while a dialog box will pop up . Please check carefully if all the programs are installed. (check method: examine the bar of Driver Nane , if all things are matching that means the software is installed successfull
CTC Communications FDM Series, 36 (Figure 4) (Figure 5) 6 .Troubleshooting 6.1 Printing offset, or offset after the screw fastening, please check the printer pulleys, pulley to see whether they are staying in a parallel line. 6.2 Temperature is displayed 0-1024 improperly, please check the thermocouple connection. If the connection is normal, you need to replace the thermocouple. 6.3 If the Temperature is displayed NA, you need to check the thermocouple connection. If the connection is normal, you need to replace the thermocouple. 6.4 X-axis move is not normal and there is chattering. It is to illustrate X-axis motor line has problems and it needs to replace
3 1.Instructions 1.1 Introduction This Instructions consist of the product overview, operating instructions, printing test model, maintenance and troubleshooting. Please read it carefully and operate the 3d printer according to the brochure. 1.2 Precautions Since different area have different voltage, please make sure how much is y
30 Submenu of the accessibility tools Select the "Utilities" and then enter into the submenu of the accessibility tools(picture 4, picture 5),use "▲" and "▼" keys to move cursor and to select the tool item,.Press "M" key to confirm the selection. Picture4 the first submenu of the accessibility tools Picture
CTC Communications FDM Series, 32 Device Information Select "Bot Statistics" to enter into the device information screen (Figure 9), check the total length of the printing as well as the last printing. Figure 9 Device information screen General parameter settings Select "General Settings" to enter the general parameters setting interface (Figure 10).Use the "▲" and "▼" keys to move the cursor to select the parameters, press the "M" key to modify the param
Ultimaker 2 Extended 3D Printers Basic user's manual
2 Extended |
Beta Prusa DualX 3D Printers Assembly instructions manual
DualX |
Flashforge DREAMER 3D Printers Quick start manual
DREAMER |
Qilive Q.3622 3D Printers Quick start manual
Q.3622 |
ProJet 1000 3D Printers Operation & user’s manual
1000 |
MakerBot Replicator Z18 3D Printers Operation & user’s manual
Replicator Z18 |
Lexmark 5000 Color Jetprinter 3D Printers Service manual
5000 Color Jetprinter |
re3D gigabot 3D Printers Installation instructions manual
gigabot |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Honda | HR215SXA | Owner's manual | honda/hr215sxa-8MW.pdf | 06 Jan 2024 | 73 | 2.25 Mb |
2 | Shure | UA221 | Operation & user’s manual | shure/ua221-35X.pdf | 17 Oct 2022 | 12 | 0.54 Mb |
3 | Fisher-Price | SUPER SOUNDS SOCCER L5805 | Operation & user’s manual | fisher-price/super-sounds-soccer-l5805-3BW.pdf | 31 Aug 2023 | 8 | 0.61 Mb |
4 | SMC Networks | BR24Q | Manual | smc-networks/br24q-J5W.pdf | 20 Jan 2024 | 22 | 0.55 Mb |
5 | Moen | 6306 | Specifications | moen/6306-47G.pdf | 31 Mar 2023 | 1 | |
6 | Yamaha | YPR-9 | Manual de usuario | yamaha/ypr-9-794.pdf | 23 Dec 2022 | 8 | 0.54 Mb |
Cellink
Boston, U.S. 100 Franklin St., Boston, MA 02110 Gothenburg, Sweden Arvid Wallgrens Backe 20, Gothenburg, 41346 Virginia, U.S. 2000 Kraft Dr., Suite 2125 Blacksburg, VA 24060 Kyoto, Japan 46-29 Yoshida-Shimo Adachi-cho, Sakyo-ku, Kyoto www.cellink.com | +1 (833) CELLINK 1 BIO X Autocalibration Kit Installation and Quick-start Guide The Autocalibr …
BIO X(16 pages) |
XYZ Printing
Unpacking Product Overview & AccessoriesNobel 1.0 is shipped with the following parts and accessories. After unpacking, please inspect the interior and exterior of the printer and accessories for damage. Please contact support for any missing or defective parts and accessories.Select “UTILITIES” > “MOVE PLATFORM”>“TO TOP”>“YES” t …
Nobel 1.0(2 pages) |
Tumaker
NX PRO DUALUSER MANUALÍndEXPrinter Specications ................................... 2Main parts of the printer ................................ 3Elements included in the printer .................... 3Installation and set up ................................... 4Quick guide ................................................... 6Calibrate dual height......... …
NX PRO DUAL(15 pages) |
XYZ Printing
-1-(US)XYZprinting, Inc.• Website: http://us.xyzprinting.com• Online Customer Service Desk: http://support.xyzprinting.com/us_en/Help/ticket/home↓↓USB Wire PortPower JackProduct Overview and AccessoriesQuick Start GuidePlease read this guide carefully for steps of unpacking, setting up, printing, post processing and printer maintenance to ensure your …
Nobel Superfine(2 pages) |
FLASHFORGE 3D PRINTER
第 一 页 共 一 页 Creator Start-up Guide [Includes unpacking, setup, usage, and troubleshooting information] FlashForge Technology Co., Ltd. www.ff3dp.com
…
Creator(41 pages) |
WANHAO
How to connect your Wanhao D9 printer to wifiFor help and support, contact [email protected]© 2019 Me3d Pty LTD 1. Sign in > 2. Download Wifi Setup > 3. Select Printer > 4. Additional StepsOverviewConnecting your Wanaho D9 to wifi is a matter of downloading your wifi setup into your BuildBee CloudDock.You will need:- BuildBee accoun …
D9(4 pages) |
Bestar Indoor Furnishing 81411-2175Indoor Furnishing Assembly instructions manual (Bestar 81411-2175) 81411-2175, 28 |
Tadano Construction Equipment TR-800XXL4PDF Manual (@756GSD), Tadano TR-800XXL4 Construction Equipment (Wednesday 06-09-2023) TR-800XXL4, 402 |
Quasar CRT TV SP-3235Quasar Product User Manual: SP-3235 PDF Operating instructions manual - 9W351D SP-3235, 72 |
SEQUANS Control Unit VZ120QControl Unit Operation & user’s manual (SEQUANS VZ120Q) VZ120Q, 15 |
Alliance Laundry Systems Dryer Drying Tumblers noneUser Manual: Alliance Laundry Systems Drying Tumblers none (YD267X, Upd.Mon 12.2023) Drying Tumblers none, 63 |
Kenwood Amplifier KA-894PDF User Guide (@I3393G), Kenwood KA-894 Amplifier (Sunday 13-08-2023) KA-894, 16 |
ICP Electronics Computer Hardware JUKI-752 DX4-100JUKI-752 DX4-100 Operation & user’s manual - 17C43B JUKI-752 DX4-100, 20 |
Carrier Air Conditioner 51 SeriesCarrier Product Manual: 51 Series PDF Operating instructions - GW7MR7 51 Series, 2 |
Panasonic Air Conditioner CS-MKE24NKUGuide: Panasonic CS-MKE24NKU (TVC75L, Upd.Mon 11.2023) CS-MKE24NKU, 2 |
Sony TV Trinitron KV-AW21Operating instructions manual for Sony Trinitron KV-AW21 TV Trinitron KV-AW21, 14 |
Life Fitness Home Gym Signature Signature Utility BenchLife Fitness Home Gym Signature Signature Utility Bench Owner's manual Signature Signature Utility Bench, 8 |
Patton electronics Modem 1060#F55A13 1060: Patton electronics Modem Owner Documentation 1060, 10 |