Manualios.com

Digital Equipment 9FX Vision 330 Installation Manual

Digital Equipment 9FX Vision 330 Manual Online:

4, 2048 votes
Digital Equipment 9FX Vision 330 User Manual
Digital Equipment 9FX Vision 330 User Guide
Digital Equipment 9FX Vision 330 Online Manual

Text of Digital Equipment 9FX Vision 330 User Guide:

  • Digital Equipment 9FX Vision 330, 9FX Vision 330 (PCI) Graphics Option Owner’s Guide Part Number: EK-V330G-OG. B01 April 1996 This guide describes the installation of the 9FX Vision 330 (PCI) Graphics Option on Digital AlphaServer and workstation products. Digital Equipment Corporation Maynard, Massachusetts

  • Digital Equipment 9FX Vision 330, April 1996 FCC ID:JF9-GXETRIOPCI Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description. FCC NOTICE: This equipment generates and uses radio frequency energy. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart G of Part 15 of FCC Rules, which are desig

  • Digital Equipment 9FX Vision 330, iii Contents 1 Overview Introduction..........................................................................................................................1–1 Module Description..............................................................................................................1–1 2 Installation Introduction..........................................................................................................................2–1 Unpacking............................................................................................................................2–1 Windows NT Installation .....................................................

  • Digital Equipment 9FX Vision 330, v Preface Purpose of This Guide This guide describes how to install the 9FX Vision 330 (PCI) Graphics Option in your computer system. Who Should Use This Guide This guide is intended for anyone who has purchased the 9FX Vision 330 (PCI) Graphics Option, either already installed or as an add-on. Structure of This Guide This guide is organized as follows: •• Chapter 1, Overview-Provides an overview of the 9FX Vision 330 (PCI) Graphics Option. •• Chapter 2, Installation-Describes how to install the 9FX Vision 330 (PCI) Graphics Option in your Digital AlphaServer or workstation running Windows NT, Digital UNIX, or OpenVMS Alpha. Conventions Used in This Guide In this gu

  • Digital Equipment 9FX Vision 330, vi This guide also uses the following conventions: Convention Meaning Note A note calls the reader’s attention to any item of information that may be of special importance. Caution A caution contains information essential to avoid damage to the equipment. italic type Italic type indicates complete titles of manuals. bold type Bold type indicates text that is highlighted for emphasis. monospaced In text, this typeface indicates the exact name of a command, routine, partition, pathname, directory, or file. Reader’s Comments Digital welcomes your comments on this or any other manual. You can send your comments to Digital in the following ways: • Internet electr

  • 9FX Vision 330 (PCI) Graphics Option 1–1 1 Overview Introduction This chapter provides a brief overview of the 9FX Vision 330 (PCI) Graphics Option. Module Description The 9FX Vision 330 (PCI) Graphics Option accelerator module is a single expansion-slot, 64-bit PCI bus graphics option, for use in Digital’s AlphaServer 2000/2100 and 400/1000 systems, and 200 4/100, 200 4/1

  • Digital Equipment 9FX Vision 330, 9FX Vision 330 (PCI) Graphics Option 2–1 2 Installation Introduction This chapter describes the installation of the 9FX Vision 330 (PCI) Graphics Option in your Digital AlphaServer or workstation system. Topics included in this chapter are: • Unpacking • Windows NT installation • Digital UNIX installation • OpenVMS Alpha installation • Hardware installation Unpacking The graphics option hardware is packaged in a single carton that contains the graphics option and an owner’s guide. Windows NT Installation Windows NT Version 3.51 (minimum version) already include

  • Digital Equipment 9FX Vision 330, Installation 2–2 9FX Vision 330 (PCI) Graphics Option _____________________Note ______________________ If a graphics option other than the Vision 330 was previously operating in the system, keep that option installed while changing over to the Vision 330 option driver. If the previously installed graphics option is not available or it is not operational, reinstall Windows NT by using the procedure described in the “Custom Windows NT Installation” section of this guide. ________________________________________________ If you have purchased the Vision 330 graphics option as an add-on, or you have chosen not to use

  • Digital Equipment 9FX Vision 330, Installation 9FX Vision 330 (PCI) Graphics Option 2–3 13. When the system reboots, the graphics driver is loaded and the Vision 330 graphics option comes up in the 640 x 480 default mode. Changing Windows NT Display Characteristics The resolutions supported by Windows NT are as follows: Resolution Colors Display Frequency (Hz) 640 x 480 16, 256, 65,536 60, 72 800 x 600 16, 256, 65,536 60, 72 1024 x 768 16, 256, 65,536 60, 70, 72 1280 x 1024 * 16, 256, 65,536 60, 70 To change the display resolution and refresh rate from the Windows NT Control Panel, perform the following steps: 1. Double click on the Display icon

  • Digital Equipment 9FX Vision 330, Installation 2–4 9FX Vision 330 (PCI) Graphics Option Install the Vision 330 graphics option as described in the “Hardware Installation” section and then perform the following steps: 1. From the ARC Multiboot blue screen menu, select Supplementary Menu. 2. Select Install Windows NT from CD-ROM. 3. Within the Windows NT Workstation Setup process, the system queries for either Express Setup or Custom Setup installation. Select C for custom installation. If you encounter difficulty, refer to the Windows NT installation guide for help. 4. Early in the Custom Setup process, the progr

  • Digital Equipment 9FX Vision 330, Installation 9FX Vision 330 (PCI) Graphics Option 2–5 Digital UNIX Installation Digital UNIX V3.2d-1 (minimum version) already includes the display driver software required by the Vision 330 graphics option. If you have purchased a Digital AlphaServer system or a workstation that already has the Vision 330 graphics option installed, and you choose to use the factory-installed software, you do not need to take further action. If you have purchased the Vision 330 graphics option as an add-on, or you have chosen not to use the factory-installed software and you choose to do a new Digital UNIX V3.2d-1 installation, you need to install Di

  • Digital Equipment 9FX Vision 330, Installation 2–6 9FX Vision 330 (PCI) Graphics Option New Digital UNIX V3.2d-1 Installation Install the Vision 330 graphics option as described in the “Hardware Installation” section and then perform the following steps: 1. Shut down your Digital UNIX system to the SRM console prompt (>>>). 2. Insert the Digital UNIX V3.2d-1 CD-ROM into the system CD-ROM drive unit. 3. Boot the CD-ROM that contains Digital UNIX V3.2d-1. 4. Refer to your Digital UNIX Installation Guide and complete the V3.2d-1 installation.

  • Digital Equipment 9FX Vision 330, Installation 9FX Vision 330 (PCI) Graphics Option 2–7 3. Using the appropriate device name, mount the Digital UNIX installation CD-ROM, install the driver software, and rebuild the kernel: # /sbin/bcheckrc # mount -r /dev/rz6c /mnt # setld -l /mnt/ALPHA/BASE/OSFSERPCI360 # doconfig -c # cp /sys/hostname/vmunix /vmunix # halt 4. Using the appropriate device, reset the SRM console target boot device to multiuser mode and boot: >>> set boot_osflags A >>> boot dka0 5. Upon rebooting, the operating system automatically detects the presence of the Vision 330 graphics option and defaults to the

  • Installation 2–8 9FX Vision 330 (PCI) Graphics Option To change to any of the other supported resolution and refresh modes, perform the following steps: 1. Change directory to /var/X11/xdm: # cd /var/X11/xdm 2. Change the mode of Xservers: # chmod +w Xservers 3. Edit the file Xservers: # vi Xservers 4. At the end of the line that reads:

  • Digital Equipment 9FX Vision 330, Installation 9FX Vision 330 (PCI) Graphics Option 2–9 Changing OpenVMS Alpha Display Characteristics OpenVMS Alpha supports 256 colors and resolutions as follows: Resolution Frequency (Hz) Pixel Frequency (MHz) 640 x 480 60, 72 25.18, 31.5 800 x 600 60, 72 40, 50 1024 x 768 60, 70, 72 65, 75, 74.37 1280 x 1024 60, 66, 72 110.16, 119, 131 _____________________ Note ______________________ Although the 640 x 480 and 800 x 600 resolutions are available, Digital does not recommend their use because many

  • Digital Equipment 9FX Vision 330, Installation 2–10 9FX Vision 330 (PCI) Graphics Option 5. During reboot of OpenVMS Alpha, the new characteristics are loaded and the Vision 330 graphics option comes up in the selected display mode. _____________________Note ______________________ During reboot, the system display may dim momentarily. This condition corrects itself when the DECwindows server comes up. ________________________________________________ Hardware Installation The following section describes how to install the 9FX Vision 330 (PCI) Grap

  • Digital Equipment 9FX Vision 330, Installation 9FX Vision 330 (PCI) Graphics Option 2–11 _____________________ Note ______________________ For the Windows NT operating system, you must install the graphics option in a slot that is located in front of the PCI-to-PCI bridge. Refer to your system owner’s guide for information about graphics option slots. ________________________________________________ 5. Grasp the top edge of the graphics option and carefully insert it into the slot, then firmly seat it. 6. Secure the module retaining bracket. 7. Replace the computer cover. 8. Ensure that the monito

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Scytek electronic GALAXY 5100RS SERIES Product manual scytek-electronic/galaxy-5100rs-series-SFE.pdf 05 Mar 2023 48 0.97 Mb
2 Sony VGP-MR100U - Room Link 2 Specifications sony/vgp-mr100u-room-link-2-VQ9.pdf 01 Jan 2023 2 0.34 Mb
3 Miele DA 5100 D Operating and installation instructions miele/da-5100-d-LS6.pdf 23 Apr 2023 36
4 Nikon 25338 Operation & user’s manual nikon/25338-6A8.pdf 20 Oct 2023 240
5 Epson S1C63558 Technical manual epson/s1c63558-VA9.pdf 03 Oct 2022 185 1.51 Mb
6 CARLO GAVAZZI EDM 35 - Datasheet carlo-gavazzi/edm-35-167.pdf 05 Jul 2022 48 0.64 Mb

Similar Resources:

  • TerraTec

    Mystify 5200

    (2 pages)
    For a successful start in a fascinating 3D gaming world Do you want the best graphics power for your games, but at the same time, a card that has much to offer in office and graphics applications? Then the Mystify 5200 is exactly right for you. With this graphics card, you will have spellbinding rendering quality for your games, combined with the …
  • Belkin

    F5U005

    (1 pages)
    System RequirementsWindows" 98Windows" 98 CD (for driver installations 1 Available PCI SlotUSB BusPort FeaturesConnect 2 USB devices instantly Supports full 12 Mbps and 1.5 Mbps low speed devicesAutomatically detects speeds and connections of devicesFull compliance with USB SpecificationsPlug-and-PlayPackage Contents1 Belkin USBBusPort- 1 UserManua …
  • RME Audio

    Hammerfall HDSP 9632

    (45 pages)
    User’s Guide Hammerfall® DSP System HDSP 9632 PCI Busmaster Digital I/O Card 2 + 8 + 2 Channels SPDIF / ADAT / Analog Interface 24 Bit / 192 kHz Digital Audio MIDI I/O TotalMix™ 24 Bit / 192 kHz üü SyncAlign® ZLM® SyncCheck® SteadyClock™ …
  • Belkin

    F5U005

    (6 pages)
    Thank you for purchasing the Belkin Components BusPort™for Macintosh®. Now, you can add two 12Mbps USB ports toyour Macintosh®system, and enjoy the Plug-and-Play easeand functionality of popular USB devices.Your Macintosh®Must Have:• One free PCI slot• OS 8.5x or later versionPackage Contents• Belkin Components USB BusPort™PCI Card • Registrat …
  • National Instruments

    IMAQ PCI-1408

    (89 pages)
    Getting Started withYour IMAQ PCI-1408 and the NI-IMAQ Softwarefor Mac OSHigh-Quality Monochrome Image Acquisition Board for PCIPCI-1408/NI-IMAQ for Mac OSJune 1997 EditionPart Number 321557A-01© Copyright 1997 National Instruments Corporation. All Rights Reserved. …
  • Black Box

    RS-422

    (15 pages)
    Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOXFREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018Web site: www.blackbox.com • E-mail: [email protected] SUPPORTINFORMATIONJUNE 2000SW421A-R2SW422 …

Comments, Questions and Opinions: