Manualios.com

Dynamic DX-RJM-HD Installation Manual

Dynamic DX-RJM-HD Manual Online:

4.35, 760 votes
Dynamic DX-RJM-HD User Manual
Dynamic DX-RJM-HD User Guide
Dynamic DX-RJM-HD Online Manual

Text of Dynamic DX-RJM-HD User Guide:

  • Dynamic DX-RJM-HD, 1 About this manual This manual can help you understand and install the Dynamic Controls DX Heavy Duty Switch Joystick (DX-RJM-HD) Secondary Remote. It describes the general principles, but it gives no guidelines for specific applications. If there is a specific requirement for your application, please contact Dynamic Controls or one of the sales and service agents to assist you. The product is part of the DX System. This manual must be read together with the DX System Manual and all other relevant DX and DX2 component manuals. In this manual, a few symbols will help you identify the purpose of the paragraph that follows: Notes:

  • Dynamic DX-RJM-HD, GBK59690 DX Heavy Duty Switch Joystick Installation Manual Issue 5 Dynamic Controls owns and will retain all trademark rights. Dynamic Controls or its licensors own and will retain all copyright, trade secret and other proprietary rights, in and to the documentation. All materials contained within this manual, in hard copy or electronic format, are protected by copyright laws and other intellectual property laws. © Copyright 2009 - 2015 Dynamic Controls. All rights reserved. Page 2 - About this

  • 2 Contents 1 About this manual 1 2 Contents 3 3 Introduction to the DX Heavy Duty Joystick 5 4 Installation 7 4.1 Mount 7 4.2 Connect 8 4.3 Program 9 4.4 Test 9 5 Appendices 11 5.1 Intended use and regulatory statement 11 5.2 Maintenance 11 5.3 Warranty 12 5.4 Safety and misuse warnings 12 5.5 Electromagnetic compatibility (EMC) 13 5.6 Environmental statement

  • Dynamic DX-RJM-HD, 3 Introduction to the DX Heavy Duty Joystick The DX Heavy Duty Joystick (DX-RJM-HD) is a robust and rugged switched joystick that has been designed for users that lack the necessary fine hand control that is associated with standard joysticks on remote modules. The DX-RJM-HD is a DX RJM-type Secondary Remote. A DX Secondary Remote must be added to a DX system that has a DX Power Module and a DX Master Remote installed. Secondary Remotes do not replace the DX Master Remote. For more information, see chapter 6 in the DX System Manual (GBK60348 DX System Manual Issue 1). For brevity, the DX System Manual will be referred to

  • Dynamic DX-RJM-HD, 4 Installation Warning: Read the DX System installation procedure (DSM section 2.1), including the general wiring recommendations, before installing the DX-RJM-HD. The DX-RJM-HD installation process is described in the following sections: 4.1 Mount – mount the DX-RJM-HD 4.2 Connect – connect the DX-RJM-HD to the DX system 4.3 Program – set parameters Joystick Source and RJM has Analog Joystick 4.4 Test – test the complete DX system for operation and safety. 4.1 Mount Mount the DX-RJM-HD securely to the wheelchair, in a position that is convenient to the wheelchair user. The selected position and orientation must give maximum mechanical and environmental protection to

  • Dynamic DX-RJM-HD, GBK59690 DX Heavy Duty Switch Joystick Installation Manual Issue 5 Warning: The DX-RJM-HD is not fully sealed against water ingress. Care should be taken to use the DX-RJM- HD indoors and out of contact with water and other liquids. 4.2 Connect The DX-RJM-HD is a DX Secondary Remote. It must be installed in a DX System that already has a DX Power Module and a DX Master Remote. Figure 3: Connecting to the DXSystem 1. Make sure that the DX System is off. 2. Connect the DX-RJM-HD with a DX BUS cable to a DX Module. This will usually be either the DX Power Module or the DX Master Remote, but it can be any other module with an available DX BUS socket. Figure 4: Connecting to the DX-RJM-HD

  • Dynamic DX-RJM-HD, 4.3 Program Set parameters Joystick Source and RJM has Analog Joystick as outlined in the following sections. Warning: Read the programming chapter of the DSM before programming the DX-RJM-HD. 4.3.1 Set Joystick Source Set the Joystick Source parameter (see DSM 5.3.8.7) to RJM instead of Master for each Drive Profile in which the DX-RJM-HD will be used. For more information on programming the DX System, see DSM chapter 7. As a general guideline select RJM for Drive Profile 1, 2 and 3, and Master for Drive Profile 4 and 5. This will activate use of the DX-RJM-HD in the first three Drive Profiles, a

  • Dynamic DX-RJM-HD, 5 Appendices 5.1 Intended use and regulatory statement Intended use The DX-RJM-HD is a DX Secondary Remote, utilising a robust switched joystick, intended for powered wheelchair users who could damage a standard joystick. The DX-RJM-HD is a module of the DX System, intended to allow users interaction with the DX System. The DX System is intended to operate powered wheelchairs utilising 24 V motors with integrated park brakes. The wheelchair manufacturers are provided with the integration, set-up, operating environment, test and maintenance information needed to ensure relia

  • Dynamic DX-RJM-HD, GBK59690 DX Heavy Duty Switch Joystick Installation Manual Issue 5 Warning: If any component is damaged in any way, or if internal damage may have occurred (for example by being dropped), have it checked by qualified personnel before operating. 5.3 Warranty All equipment supplied by Dynamic Controls is warranted by the company to be free from faulty workmanship or materials. If any defect is found within the warranty period, the company will repair, or at its discretion replace, the equipment without charge for materials or labour. This warranty is subject to the provisions that the equipment: l has been correctly installed; l has been thoroughly checked upon

  • Dynamic DX-RJM-HD, l It is the responsibility of the OEM and installer to make sure that the maximum driving speed of the wheelchair is limited as appropriate when the wheelchair is in a mechanically unstable position, for example when the seat is raised. l It is the responsibility of the therapist/ installer to minimize any risk of use error, including those arising from ergonomic features and/or the environment in which the device is intended to be used. l The wheelchair set up and configuration process should take into consideration the o technical knowledge, experience an

  • EUROPE ASIA AUSTRALASIA CORPORATE OFFICE USA Ph: +44-1562-826-600 Fax: +44-1562-824-694 [email protected] Ph: (Taiwan): +886-955-335 243 Ph: (China): +86-512-6289 2847 Fax: +886-2-2598 1562 [email protected] Ph: +64-3-962-2519 Fax: +64-3-962-2966 [email protected] Ph: +1-440-979-0657 Fax: +1-440-979-1028 [email protected] Dynamic Controls is the

Related Products and Documents (Video Game Controller):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips SGP9100 Specifications philips/sgp9100-961.pdf 14 Oct 2022 2
2 W Audio NL4 SpeakON Operation & user’s manual w-audio/nl4-speakon-4VG.pdf 20 Feb 2023 2
3 Sharper Image Mosquito Operation & user’s manual sharper-image/mosquito-122.pdf 28 Nov 2023 8
4 Denon AVR-2308 Specifications denon/avr-2308-5EW.pdf 11 Apr 2023 2 0.25 Mb
5 Viliv X70EX Operation & user’s manual viliv/x70ex-272.pdf 23 Sep 2022 26 7.02 Mb
6 Brother BAS-423A Parts book brother/bas-423a-QY7.pdf 13 Sep 2023 83 5.12 Mb

Similar Resources:

  • ZD

    T7AH-2400

    (34 pages)
    Tel:+86(755)84008148 +86(755)84673906Fax:+86(755)84673903Address:NO.28 Wenxin Road, Xinmu Lao Village,Pinghu Town,Longgang District,Shenzhen City,Guangdong Province,518111 ChinaWebsite:www. zdracing. com SHENZHEN XINGYAOHUAINDUSTRIALCO.,LTDT7AH-2400T7AH-2400T7AH-2400 …
  • KAT VR

    Striker VR

    (14 pages)
    KAT Striker VR Game Controller Owner’s ManualTips:Thank you for purchasing our product. Please read this manual carefully, and pay attention to all included instructions before using KAT Striker. Keep it for further use.Warning: This product is not an imitation firearm. Please use it according to the instructions. …
  • Sony

    PS3 Wireless Stereo Headset

    (318 pages)
    Repair your PSP with this Repair Guide PS3 Repair Guide - Don't spend Big bucks to have it fixed! Do you have a PS3 that needs repair? This Repair Guide contains repairs for some of the most common PS3 Problems: ● How to clean the Blu-Ray lens in your PS3● Fix the Blinking Playstation 3 problem● fix the PS3 Bluetooth controller issue …
  • M.T.H.

    Premier EP-5 Electric Engine

    (26 pages)
    Premier EP-5 Electric EngineOPERATOR’S MANUALCompatibilityThis engine will operate on any traditionalO-42 Gauge track system, includingM.T.H.’s RealTrax® or ScaleTrax™ ortraditional tubular track. It is also compatible with most standard AC transformers. (Seepage 20 for a complete list of compatibletransformers and wiring instructions.)PLEASE READ BE …
  • Lepmis

    USB-JAW

    (4 pages)
    L:\PRD\USB-JAW\MNL\USB-JAW_MNLv2.doc Page 1 of 4 User Guide for USB Mouse Joystick The USB Joystick Mouse (PC-JAW) replaces a standard PC USB mouse. PC-JAW presents the same robust, ultra-smooth joystick familiar to powered wheelchair users, and has two sockets for the user’s own switches to operate mouse left/right click. It is supplied with the sm …
  • Nintendo

    Switch HAC-045

    (2 pages)
    Health and Safety InformationPlease read and observe the health and safety information. Failure to do so could result in injury or damage. Adults should supervise the use of this product by children. WARNING – Battery• Stop using this product if the battery is leaking. If battery fluid comes into contact with your eyes, immediately rinse your eyes with …

Comments, Questions and Opinions: