Manualios.com

AMT Datasouth 7200 Operation & User’s Manual

AMT Datasouth 7200 Manual Online:

3.15, 2257 votes
AMT Datasouth 7200 User Manual
AMT Datasouth 7200 User Guide
AMT Datasouth 7200 Online Manual

Text of AMT Datasouth 7200 User Guide:

  • AMT Datasouth 7200, 7200 APPENDIX-6 Operation Manual StoringTransfer Ribbons To store transfer ribbons, note the following: • Do not open the package if the ribbon is to be stored. • Avoid direct sunlight. Ensure that the following temperature and humidity ranges are met. Temperature: 59 to 86 degrees F (15 to 30 degrees C) Humidity: 45 to 80% RH • Avoid high or drastically changing temperatures or humidity. • Keep the ribbon out of reach of children. A.2.2 Printer Accessories Appendix 2: Consumables To order supplies, call the sales agent or company where the printer was purchased. A.2.1 Thermal Transfer Ribbon Always use a genuine Sigma Data

  • AMT Datasouth 7200, 7200 APPENDIX APPENDIX-5 Operation Manual A.1.7 Inserter (1) Document feeding direction (2) Shutter (3) Non-standard documents inserted (4) Document feeding (5) Documents rejected A.1.8 Output Stacker (1) Capacity (2) Document direction (3) Full detection A.1.9 Transfer Ribbon Printing (Type D printers only) (1) Near-end detection (2) End detection (3) Breakage detection (4) Standardization (5) Life span (6) Setting (7) Multi-time print Face side up, leading side first in Not available Passed back to the front inserter to be kept, or jammed in the carrier structure The beep sound occurs when a document is fed normally Passed to the output stacker 100 documents Face side

  • AMT Datasouth 7200, 7200 3-4 Operation Manual C. Insert the cleaning card. • Insert the cleaning card with the instruction label on the card facing upward. • The LCD panel displays "Maghead Cleaning." while the ATB printer cleans the magnetic head. • At the end of cleaning, the cleaning card is automatically ejected into the output stacker. Output stacker Cleaning card Repeat the cleaning procedure several times as necessary.

  • AMT Datasouth 7200, Operation Manual i 7200 INTRODUCTION NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference t

  • Operation Manualvi 7200 Temperature and Humidity Make sure that the following temperature and humidity conditions are met : • Ambient temperature: 41 to 104 degrees F (5 to 40 degrees C) • Ambient humidity: 20% to 90% RH (relative humidity) — no condensation. Notes on the Operating Environment When installing the product where the ambient humidity is 30% or less, it is recommended th

  • AMT Datasouth 7200, 7200 OPERATION 2-5 Operation Manual 2.3 Loading the Documents Falling covers may cause injury. Do not take your hands off covers when open- ing and/or closing them. CAUTION Documents are loaded into the bins. The printer has two internal bins (1 and 2) and one external bin (3). The two or three bins can store the same or different types of documents. When different types of documents are loaded, the bins are selected as specified by the terminal. 2.3.1 Loading Documents into BINs 1 and 2 Each internal bin can store up to 500 documents. The following explains how to load the documents. Refer to the next section for loading documents into BIN 3. (Documents in a box) Sid

  • AMT Datasouth 7200, 7200 OPERATION 2-13 Operation Manual 2.5 Loading Documents into the Inserter While the ATB printer is on, you can use the inserter to read and/or print a document. Note that only one document can be inserted at one time. Print face-up Magstripe face-down Coupon Document With the printer turned on, insert a document into the inserter slot until you hear a beep. The ATB printer then draws the document in for printing. Note! Insert only one document at a time. Do not insert the next document before the previous document is ejected. Otherwise, a double-feed or paper jam occurs. Note! Do not insert the coupon portion of the document (only) or a paper jam can occur. To clear a paper jam

  • 1-5Operation Manual 7200 BEFORE USING THE S7200 1.2.3 Operator Panel Operator Panel Layout LEDs LCD 16 columns by 2 rows Keys éé çç êê ERRORERROR ONLINEONLINE DATADATA MODEMODE ENTERENTER ONLINEONLINE RESETRESET EJECTEJECT CLEANINGCLEANING TESTTEST LED Functions LEDs indicate printer status by turning on, turning off, or blinking. ONLINE DATA ERROR MODE LCD Panel Functions

  • 7200 4-6 Operation Manual If the jammed coupon has NOT been cut: 1. Use the knob for the appropriate bin AND the feed knob. 2. Turn both knobs clockwise simultaneously to return the jammed coupon to the input slot. (continued) Feed knob Feed knob 2. Turn the feed knob to feed the jammed coupon to the magnetic block. (Go to Step E to remove the jammed coupon.)

  • AMT Datasouth 7200, 7200 OPERATION 2-11 Operation Manual Magstripe face down BIN 3 slot Visual inspection window H. Close the side cover (top right). G. Feed the document. Turn the green knob, labeled 3, counter-clockwise to feed the front end of the document until you hear a beep (if the printer is turned on). If the printer is off, turn the knob a full turn. Note! Make sure that the documents do not touch each other in the visual inspection window. F. Insert the first document in the BIN 3 slot until it touches the feeding roller.

  • AMT Datasouth 7200, 7200 DAILY MAINTENANCE 3-5Operation Manual Avoid fire when using isopropyl alcohol to reduce the risk of burning. CAUTION 1. Moisten a cotton swab with isopropyl alcohol. 2. Use the cotton swab to clean the thermal head. Rub the swab back and forth across the print head. Although the cleaning frequency depends on the operating conditions (quality of the paper media used, dusty atmosphere, etc.), you should clean the thermal head at least once every 5,000 documents. 3.1.3 Cleaning the Thermal Head Clean the thermal head when replenishing a bin

  • AMT Datasouth 7200, 7200 APPENDIX APPENDIX-3 Operation Manual Temperature and Humidity Make sure that the following temperature and humidity conditions are met : • Ambient temperature: 41 to 104 degrees F (5 to 40 degrees C) • Ambient humidity: 20% to 90% RH (relative humidity) — no condensation. Notes on the Operating Environment When installing the product where the ambient humidity is 30% or less, it is recommended that you use a humidifier to raise the humidity to higher levels. Use an antistatic mat as necessary. Power Connection Power Line Conditions Ensure that the power supply satisfies the following requirements: • Voltage: 85 to 132 or

  • AMT Datasouth 7200, Operation Manual 7200 Introduction.............................................................. i 1. Before Using the ATB Printer ......................... 1-1 1.1 Checking the Package ....................................................... 1-2 1.2 Names and Functions ........................................................ 1-3 2. Operation.......................................................... 2-1 2.1 Connecting the ATB Printer.............................................. 2-2 2.2 Turning the Power On and Off .......................................... 2-4 2.3 Loading th

  • AMT Datasouth 7200, 7200 4-12 Operation Manual 4.2 Error Messages When an error has occurred in the ATB printer, an error message is displayed on the LCD panel. The error messages are listed in the table below. Error Message Error State Recovery Procedure WARNING: Indicates a relatively minor error, ex. when consumption articles (documents, etc.) has run short (paper-out), when the operator has made a mistake, etc. Open the cover, take necessary actions for recovery, and close the cover. If the error continues, contact a service technician. PAPER JAM: Indicates an error caused by the paper jam. The block where the paper jam has occurred is displayed. Open the cover, remove the

  • AMT Datasouth 7200, 7200 OPERATION 2-17 Operation Manual K. Lock the side cover by gently pushing the side cover and turning the key counter-clockwise to the LOCK position. Remove the key. Note! Be careful not to leave the key in the printer. If the key cannot be removed in the LOCK position, turn it slightly clockwise or counter-clockwise. J. Set the key to the OPEN position and close the side cover (bottom right).

  • 7200 4-8 Operation Manual Printing block and output stacker block Feed knob F. Remove the jammed coupon from the printing block and output stacker. 1. Locate the blue feed knob for the output stacker. 2. Turn the feed knob in the direction of the arrow to feed the jammed coupon to the output stacker. The method varies depending on the location of the jammed coupon. When the ja

  • AMT Datasouth 7200, 7200 APPENDIX-2 Operation Manual A.1.2 Covers Open (swing down) the bottom right side cover first, then open (swing up) the top right side cover. You can insert the documents, change the ribbons (when TT is set), take out a jammed document, and perform cleaning and other tasks while the covers are open. The cover lock (key operated) is on the bottom right side cover. (See "Space Required.") Side Covers Open/Closed Key Side cover (bottom right) Side cover (top right)

  • AMT Datasouth 7200, 7200 2-12 Operation Manual I. Set the key to the OPEN position, and close the side cover (bottom right). J. Lock the side cover by gently pushing the side cover and turning the key counter-clockwise to the LOCK position. Remove the key. Note! Be careful not to leave the key in the ATB printer. If the key cannot be removed in the LOCK position, turn it slightly clockwise or counter-clockwise.

  • Operation Manual v 7200 INTRODUCTION Left Right Left Right Front Top Back inches (millimeters) 9.8 in (250mm) 15 in (380mm) 9.8 in (250mm) 5.9 in (150mm) Space Required 9.8 in (250mm) 8.3 in (210mm) 21.6 in (550mm) 9.8 in (250mm) 9.8 in (250mm) 9.8 in (250mm) 8.3 in (210mm)

  • 7200 TROUBLESHOOTING 4-3 Operation Manual 4.1.3 Removing the jammed coupon To remove the jammed coupon, check the location of the jam and follow the steps below. • In the table above, Steps A through J correspond to the step numbers in the following procedures. Unlock the cover before starting any procedure. Release the key lock on the side cover. Turn the key clockwise to th

  • AMT Datasouth 7200, 7200 APPENDIX-4 Operation Manual (2) Document specifications (3) Detection (4) Documents set A.1.5 Encoding Specifications (1) Magnetic encode method (2) Track (3) Recording density (4) Coded character set (5) Data check method (6) Coercive force (7) In case of encode error (8) Magnetic stripe specifications (9) Encoding area A.1.6 Printing (1) Printing method (2) Printing area (3) Printing color (4) Dot-density Refer to "Transfer Ribbon Printing" for the transfer ribbon structure. A.1.4 Bins and Feeder This ATB printer has 2 internal bins and a third external bin as standard. Each of them can contai

  • AMT Datasouth 7200, 7200 2-8 Operation Manual H. Close the side cover (top right). I. Set the key to the OPEN position, and close the side cover (bottom right). J. Lock the side cover by gently pushing the side cover and turning the key counter-clockwise to the LOCK position. Remove the key. Note! Be careful not to leave the key in the ATB printer. If the key cannot be removed in the LOCK position, turn it slightly clockwise or counter-clockwise.

  • AMT Datasouth 7200, 1-4 Operation Manual 7200 1.2.2 Functions No. Names Functions A Operator panel Houses the LEDs and keypad needed to operate the ATB printer. B Cover lock Locks the side cover. (Use the key to open the cover.) C Inserter Used to insert single coupons (one at a time). D Output stacker Receives ejected coupons, print-side up. (Has a capacity of 100 coupons.) E Feed knobs Used to remove jammed coupons. F BIN 1, BIN 2, and BIN 3 load knobs Used to load coupons into the feed rollers for each bin. G BIN 1 Used to hold coupons for printing. (BIN 1 has a capa

  • AMT Datasouth 7200, 1-3Operation Manual 7200 BEFORE USING THE S7200 N — BIN 3 K — Power switch J — Interface connector (Downline) B — Cover lock L — Power connector M — Interface connector (Host) HOST DOWNLINE D — Output stacker 1.2 Names and Functions This section explains the names and functions of each part. 1.2.1 Names of Parts A — Operator panel C — Inserter G — BIN 1 H — BIN 2 I — Thermal print head E — Feed knobs O — Thermal transfer take-up reel F — BIN 1, BIN 2, and BIN 3 load knobs P — Thermal transfer supply reel

  • AMT Datasouth 7200, 1-2 Operation Manual 7200 Operation Manual AC Power Cable ATB Printer Keys 1.1 Checking the Package The ATB printer and accessories are packed in the same box. Carefully remove the printer and accessories from the box and packing materials, then check that the package contains all of the items needed for operation that are pictured below. The package also contains a warranty card and may have other information sheets. Cleaning Kit

  • AMT Datasouth 7200, 7200 OPERATION 2-15 Operation Manual Falling covers may cause injury. Do not take your hands off covers when opening and/ or closing them. CAUTION Side cover (bottom right) Side cover (top right) D. Slowly open the first side cover (bottom right) as wide as possible. E. Slowly open the second side cover (top right) as wide as possible. F. Install the transfer ribbon. Gently push the transfer ribbon into the receptacle until both pivots click and hold the ribbon. Note! Be careful not to let the ribbon insertion port catch the lead tape. Pivots

  • AMT Datasouth 7200, 7200 DAILY MAINTENANCE 3-7Operation Manual 3.1.5 Cleaning a Carrier Roller Paper dust and other dirt clinging to a carrier roller can cause a paper jam or poor printing (ex. data can be printed at a slant on the paper). The procedure for cleaning the carrier roller is explained as illustrated below. The carrier roller should be cleaned while the side cover remains open. Cleaning sheet Blue knob labeled FORWARD Leading edge of the cleaning sheet Inserter and Magnetic Blocks Avoid fire when using isopropyl alcohol to avoid the risk of burning. CAUTION 1. Apply a small amount of isopropyl alcohol to the long, thin cleaning sheet. 2. Insert the long cleaning sheet into the insert slot until it

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Hobart LX18 ML-104349 Instruction manual hobart/lx18-ml-104349-93Z.pdf 26 Nov 2022 28 1.09 Mb
2 AEG MICROMAT DUO 2231 E Operating instructions manual aeg/micromat-duo-2231-e-1RB.pdf 29 Jun 2023 48 4.11 Mb
3 Konica Minolta Fujitsu fi-6130 User instructions konica-minolta/fujitsu-fi-6130-E35.pdf 24 Jun 2023 222
4 Black & Decker GR1000 Instruction manual black-decker/gr1000-VYK.pdf 22 Feb 2024 21
5 Sanyo DVD-SL20 Service manual sanyo/dvd-sl20-32Y.pdf 24 Jul 2022 4
6 Rackmount RKP21x-208KVM Operation & user’s manual rackmount/rkp21x-208kvm-28Z.pdf 04 Nov 2023 25 0.36 Mb

Similar Resources:

  • Lexmark

    X746

    (4 pages)
    Fax guideYou can send a fax from the printer by typing the fax number, using a shortcut number, or using the address book.Note: To place a one‑second dialing pause within a fax number, press .The dial pause appears as a comma in the "Fax to" field. Use this feature if you need to dial an outside line first.Sending a fax using the printer control …
  • Rimage

    Professional 5100N

    (2 pages)
    USB CablePrinter Power CordPrinter CableKeyboard*Mouse*Monitor*Power SwitchPower CordNetwork CableCopyright © 2008 Rimage Corporation 2000504_BReplace the Rimage Professional AutoloaderBefore you begin:1. Stop or pause all jobs.2. Power off the embedded control center.3. Power off the Professional.4. Disconnect the power cord from the Professional.b. Remove …
  • Epson

    Stylus Pro 7000 Series

    (12 pages)
    EPSON Stylus Pro 7000 series8/00 EPSON Stylus Pro 7000 series - 1-Note:The parallel and USB interfaces cannot be connected at the same time.Printer SpecificationsPrintingEngine ReliabilityElectricalroll paper coverpaper hammockcontrol panellower coverpaper set leverparallel interface connectoroptional interface shield plateUSB interface connectorAC inletink …
  • NETGEAR

    PS104 - Hub - EN

    (178 pages)
    M-PS100NA-1May 1999NETGEAR, Inc.A Bay Networks Company4401 Great America ParkwaySanta Clara, CA 95054 USAPhone 888-NETGEARInstallation and Reference for the Model PS104/PS105/PS110 Print Server …
  • HP

    Officejet Enterprise Color MFP X585 Flow

    (172 pages)
    caps lockshiftA S D F G H J K LZ X C V B N M@ altaltshiftenter,.?/:;“‘User GuideOfficejet Enterprise Color MFP X585/X585 Flowwww.hp.com/support/ojcolorMFPX585 …
  • Canon

    imageRUNNER 1750i

    (618 pages)
    User’s GuideRead this guide first.Please read this guide before operating this product.After you finish reading this guide, store it in a safe place for future reference. Guide de I’utilisateurVeuillez d’abord lire ce guide.Lisez ce guide avant d’utiliser ce produit.Après avoir pris connaissance de son contenu, conservez-le dans un endroit sûr pour …

Comments, Questions and Opinions: