Manualios.com

Iso-Tech ICM 134 Instruction Manual

Iso-Tech ICM 134 Manual Online:

3.7, 981 votes
Iso-Tech ICM 134 User Manual
Iso-Tech ICM 134 User Guide
Iso-Tech ICM 134 Online Manual

Text of Iso-Tech ICM 134 User Guide:

  • EN - 2  Safety Information Read and understand this Instruction Manual completely before using this instrument. Failure to observe the warnings and cautions in this Instruction Manual may result in injury or death, or damage to the instrument and other equipment or property. If this instrument is used in a manner not specified in these instructions, the protec- tion provided

  • Iso-Tech ICM 134, EN - 3 - Wear suitable Personal Protective Equipment when working around or near hazardous Live conductors which could be accessible. - Do not use the thermocouple to measure the temperature of Hazardous Live conductors or equipment.  Caution - Disconnect the test leads from the test points before changing the position of the function rotary switch. - Never connect the instrument to a source of voltage with the function rotary switch in Ω/  </ A position. - If possible, do not w

  • EN - 4 Maintenance Do not attempt to repair this Instrument. It contains no user-serviceable parts. Repair or servicing should only be performed by qualified personnel. This instrument should be calibrated yearly, or more frequently if used in harsh conditions or if it is suspected of being inaccurate. For calibration and repair contact RS Components - the address is

  • Iso-Tech ICM 134, EN - 5 To conserve battery power, the Auto Power -off function will turn the instrument off approximately 10 minutes after the last operation. 10min To disable the Auto Power-off function: Turn the instrument off, press and hold the “Backlight” button and turn the rotary switch to the required function. The auto Power-off is disabled until the next time the instru- ment is turned off and on again. Power On / Off Auto Power Off

  • Iso-Tech ICM 134, EN - 8 DC µA Capacitance Note – To improve the measurement accuracy of a small value capacitor, record the reading with the test leads open circuit, then substract the residual capacitance of the Instrument and leads from the final measurement. C UNKNOWN = C MEASUREMENT - C RESIDUAL

  • Iso-Tech ICM 134, EN - 10 ACA 3 9 2 A  CAT.Ⅲ.600V with respect to earth for the jaw. Tactile Barrier for hand guard.  Do not hold the meter across the Tactile Barrier. I I I I OK OK OK I + (-I) = 0 Back Light

  • Iso-Tech ICM 134, EN - 11 Specifications 1-1 General Specifications LCD display digits : 3 3 / 4 digit large scale Liquid Crystal Display. Display resolution : 4000 counts. Measurement rate : 1.5 times / sec. Overrange display : “OL” is displayed for "Ω" functions, The real value is shown for the "A" ,"V" and "°C/°F " function. Automatic power-off time : Approximately 10 minutes after last operation. Low battery indicator :  is displayed. Power requirement : 9V battery Type 6LR61, IEC6F22 or equivalent) Battery life : Approximately 200 hours with Alkaline battery. 1-2 Environmental Conditions Ind

  • EN - 12 Measurement Category lll is for measure- ments performed in the building installation. Examples include measurements on distribution boards, junction boxes, socket- outlets and wiring and cables in the fixed installation. Measurement Category lV is for measure- ments performed at the source of the low-voltage installation. Examples include

  • Iso-Tech ICM 134, EN - 13 1-3 Electrical Specifications Accuracy is ±(% reading + number of digits) at 23°C (73.4°F) ± 5°C (± 9°F) < 80%RH. Temperature coefficient : Add 0.2 x (Specified accuracy) / °C (1.8°F), < 18°C > 28°C (< 64.4°F >82.4°F). DC / AC Volts Range DC Accuracy AC Accuracy 4.000V ±(0.9% + 2dgt) ±(1.5% + 5dgt) 50Hz ~ 500Hz 40.00V 400.0V DC1000V AC750V Over voltage protection : DC 1000 V or AC 750 V Input Impedance : 10MΩ // less than 100pF. CMRR / NMRR : (Common Mode Rejection Ratio) (Normal Mod

  • Iso-Tech ICM 134, EN - 14 Diode Check and Continuity Resolution Accuracy 10 mV ±(1.5%+5 dgt)* * For 0.4V ~ 0.8V Max.Test Current : 1.5mA Max. Open Circuit Voltage : 3V Overload Protection : 600Vrms Continuity : The built-in buzzer sounds when the resistance is less than approxi- mately 100Ω. The response time is approximately 100 msec. DC µA Range Accuracy 400.0 µA 4000 µA ±(1%+2 dgt)* Voltage barden : < 5mV / µA Overload Protection : 600Vrms Capacitance Range Accuracy 4.000nF ±(3.0% + 20 dgt) 40.00nF 400.0nF 4

  • Iso-Tech ICM 134, EN - 15 Temperature Function Range Accuracy -40.0 °C ~ 0.0°C 1% ± 4 °C 0.0 °C ~ 400.0 °C 1% ± 3 °C °F -40 °F ~ 32 °F 1% ± 8 °F 32 °F ~ 750 °F 1% ± 6 °F °C 750 °F ~ 1000 °F 2% ± 8 °F Overload Protection : 600Vrms Battery Replacement When the low battery indicator "" appears on the LCD, replace the batteries with the type given in the specifications.   WARNING Disconnect the test leads from the circuit and the instrument before removing the battery cover. Refer to the fo

  • Iso-Tech ICM 134, EN - 16 Limited Warranty This instrument is warranted to the original purchaser against defects in material and workmanship for 3 year from the date of purchase. During this warranty period, RS Components will, at its option, replace or repair the defective unit, subject to verifica- tion of the defect or malfunction. This warranty does not cover disposable batteries, or damage from abuse, neglect, accident, unauthorized repair, alteration, contamination, or abnormal conditions of operation or handling. Any implied warranties arising out of the sale of this product, including but not lim- ited to i

  • Iso-Tech ICM 134, Asia Iso-Tech 460 Alexandra Road, #15-01A PSA Building Singapore 119963 USA 7410 Pebble Drive Fort Worth Texas 76118-6961 Europe Iso-Tech PO Box 99 Corby Northamptonshire NN17 9RS United Kingdom Canada 1701 Woodward Drive Ste 108 Ottawa Ontario K2C 0R4, Canada Japan West Tower (12th Floor) Yokohama Business Park 134 Godocho, Hodogaya Yokohama, Kanagawa 240-0005 Japan South America Av. Pdte. Eduardo Frei M. 6001-71 Centro Empresas El Cortijo Conchali, Santiago, Chile

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 HiFiMAN HE-560 Owner's manual hifiman/he-560-EZC.pdf 12 Aug 2023 8
2 Garden Oasis D71 M83915 Owner's manual garden-oasis/d71-m83915-WP5.pdf 05 Jun 2023 9 1.22 Mb
3 Cuisinart GR-4N Instruction booklet cuisinart/gr-4n-64H.pdf 27 Dec 2023 29 1.39 Mb
4 Brother 882-W01 Operation manual brother/882-w01-941.pdf 22 Dec 2022 376 52.8 Mb
5 Samsung 450 Series Installation manual samsung/450-series-N1T.pdf 03 Feb 2023 71
6 Denver DMB-106HD Operating manual denver/dmb-106hd-P29.pdf 28 Mar 2023 14 0.76 Mb

Similar Resources:

  • Gossen MetraWatt

    SECUTEST BASE

    (8 pages)
    Firmware Update ToolSoftware Program for Updating the Firmware for the Test Instruments SECUTEST BASE(10)/PRO, SECULIFE ST BASE(25) & PROFITEST PRIME (AC)3-349-793-035/10.17Operating Instructions …
  • Spektrum

    SPMA9574

    (8 pages)
    NOTICE: All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature, visit http://www.horizonhobby.com and click on the support tab for this product.Meaning of Special Language:The following terms are used throughout the product literature to indicate var …
  • Perel

    E305W

    (10 pages)
    WEEKLY TIMER – 3600W WEEKTIMER – 3600W MINUTEUR HEBDOMADAIRE – 3600W TEMPORIZADOR SEMANAL – 3600W WOCHENZEITSCHALTUHR – 3600W USER MANUAL NOTICE D’EMPLOI GEBRUIKERSHANDLEIDING MANUAL DEL USUARIO BEDIENUNGSANLEITUNG …
  • Joy-it

    2860-JT-LCRT7

    (6 pages)
    www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn MULTI-FUNCTIONAL TESTER Multi-functional measurement device 1. GENERAL INFORMATION Dear customer, thank you for choosing our product. In the following, we will show you how to use this device. Should you encounter any unexpected problems during use, please do not hesitate to contact us. …
  • Direct Supply

    Attendant

    (2 pages)
    1-800-634-7328 ■ directsupply.com6391Date of Printing: January 2013Distributed by Direct Supply Manufacturing, Inc. 6699 N Industrial Road, Milwaukee, WI 53223.© 2012 Direct Supply Manufacturing, Inc. All Rights Reserved. Direct Supply®, Attendant®, and all associated logos are the registered trademarks of Direct Supply Inc., used under license. Our …
  • VST

    Lab Coffee 2

    (8 pages)
    VST inc Lab Coffee IIDigital RefractometerInstructions for Base ModelsCoffee, EpressoCoffee & EspressoRead Instruction Manual Before UseRev DMade in USA© VST, Inc. 2012 …

Comments, Questions and Opinions: