AMX NXA-UPS1500 Operation/reference Manual

Text of AMX NXA-UPS1500 User Guide:

• AMX NXA-UPS1500, Assembling the Battery Pack 7 NXA-UPS1500 Uninterruptible Power Supply Assembling the Battery Pack Overview The UPS battery needs to be assembled before installation: the battery pack consists of four individual batteries, a connector wiring package (one large wire harness with two black and two red wires attached to a four-pin connector and two separate red wires), and the aluminum battery case components. Each battery has color-coded contacts, with red for "positive" and black for "negative". Each battery will lie on its side in the battery c

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 28 NXA-UPS1500 Uninterruptible Power Supply EPM Installation Instructions Tower Installation - Step One Tower Installation - Step Two FIG. 26 EPM - Tower Installation - Step 1 FIG. 27 EPM - Tower Installation - Step 2

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 25 NXA-UPS1500 Uninterruptible Power Supply NXA-UPS1500 EPM Installation Overview NXA-UPS1500 EPM Extended Power Module (FG 678-15) works with the NXA-UPS1500 to increase the duration of backup power, providing up to 3X additional battery run time (FIG. 24). IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during installation and maintenance of the EPM and batteries. FIG. 24 NXA-UPS1500 EPM Extended Power Module (optional accessory) Screw covers (rear) (front) EXT.BAT. terminal UPS BAT. termina

• AMX Limited Warranty and Disclaimer All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After the 30-day period the RMA will be cancelled. Any shipments received not co

• AMX NXA-UPS1500, Table of Contents i NXA-UPS1500 Uninterruptible Power Supply Table of Contents NXA-UPS1500 Uninterruptible Power Supply ....................................................1 Overview .................................................................................................................. 1 Features.................................................................................................................... 1 Product Specifications ............................................................................................. 2 Front Panel LCD....................................................

• AMX NXA-UPS1500, Mounting the NXA-UPS1500 15 NXA-UPS1500 Uninterruptible Power Supply Rack-Mount Setup - Step Three Rack-Mount Setup - Step Four In order to mount the NXA-UPS1500 into an equipment rack, you must use a rack shelf (not included with the UPS), as indicated in FIG. 14, FIG. 15 and FIG. 16. FIG. 14 Rack-Mounting the UPS. - Step 3 FIG. 15 Rack-Mounting the UPS. - Step 4 Rack shelf required, not included with the UPS

• AMX NXA-UPS1500, Table of Contents iii NXA-UPS1500 Uninterruptible Power Supply Replacing the Battery in the EPM - Step Three ............................................................ 34 Replacing the Battery in the EPM - Step Four .............................................................. 34

• AMX NXA-UPS1500, Battery Replacement 23 NXA-UPS1500 Uninterruptible Power Supply Battery Replacement Overview 1. When the Battery Replacement LED (Red) lights up, you may leave the UPS to be re-charged for at least 8~10 hours to see whether the Red LED will be extinguished after the Self-Test function is executed again. 2. In case the Red LED remains unchanged, you may unscrew the Hot Swappable Battery cover to replace a new battery, then press the “On” Switch to disable the Red LED. Assembling the Battery Pack The UPS battery needs to be assembled before installation: the battery pack consists of four individual batteries, a connector wiring packag

• AMX NXA-UPS1500, Connecting the UPS 17 NXA-UPS1500 Uninterruptible Power Supply Connecting the UPS Connect Utility and Load First, connect the UPS with Utility, then plug the loads into the Outlets on the rear of the UPS (FIG. 17). To use the UPS as a master “On/Off” switch, make sure that all of the loads are switched “on”. These UPS outlets provide battery backup and surge protection to the equipment when Utility voltage is out of window. FIG. 17 Plug The Loads Into the UPS NetLinx / MAX Equipment Touch Panels UPS Do not connect a lase

• AMX NXA-UPS1500, Mounting the NXA-UPS1500 12 NXA-UPS1500 Uninterruptible Power Supply Selecting Installation Position It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the UPS and extend the life of the UPS (FIG. 8). UPS Setup The UPS offers a flexible form factor enabling integration into a wide variety of environments (FIG. 9). The UPS with space-saving design only occupies 2 RU. If you are installing the UPS in a tower, continue to the following section, "Tower Setup",

• AMX NXA-UPS1500, NXA-UPS1500 Uninterruptible Power Supply 4 NXA-UPS1500 Uninterruptible Power Supply Front Panel LCD FIG. 2 describes the elements of the front panel LCD: FIG. 2 Elements Of The Front Panel LCD 1. Utility (Green LED) 2. Fault (Red LED) 3. On Switch 4. Off Switch 5. Battery Replacement 6. Battery Backup (Amber LED) 7. Battery Low 8. Bypass 9. Utility Low, UPS Boost 10. Utility High, UPS Buck 11. UPS Output Indicator 12. Polarity Error or Ground Fault 13. Overload 14. Load/Battery Level (%) 15. Load/Battery Level 1234 5 6 7 891011 12 13 14 15 1 6 2 Indication Control Button

• AMX NXA-UPS1500, Assembling the Battery Pack 8 NXA-UPS1500 Uninterruptible Power Supply Accessing the Battery Compartment - Step One Accessing the Battery Compartment - Step Two FIG. 4 Replacing the Battery - Step 1 FIG. 5 Replacing the Battery - Step 2

• AMX NXA-UPS1500, Operation 22 NXA-UPS1500 Uninterruptible Power Supply 3. If the battery voltage is detected lower than set limit, the Battery Replacement mark will blink for 5 times then extinguish to stop self-test procedure. And if battery is detected weak or dead, the Battery Replacement mark will steadily illuminate. The UPS will remain at “NO” output, if the start-up operation is not proceeded properly even though the Input Power Cord is connected to the wall receptacle. IMPORTANT - Plug the UPS onto the wall receptacle to charge the UPS for over 8 hours after initial installation. Store at -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six months. Store at +30 to +45 °C (+86

• 2/09 © 2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.com

• AMX NXA-UPS1500, Operation 21 NXA-UPS1500 Uninterruptible Power Supply Operation Turn On the UPS 1. Connect the UPS to the wall receptacle. LCD will display “OFF”, when Utility is normal. If there is nothing on the LCD, go to step 3. 2. Push the “On” Switch on the front panel to start the UPS. Both the LCD and Utility LED (Green) are lit. The start-up procedure is completed and the loads are supplied by the UPS. 3. To cold start the UPS, press the “On” Switch on the front panel for approximately 3 seconds until the LCD lights up and buzzer sounds, then release the “On” Switch. The UPS starts operating and Battery Backup LED (Amber) lights up. The cold start-up procedure is completed

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 27 NXA-UPS1500 Uninterruptible Power Supply EPM - Installation and Operation The packing condition and the external outlook of the unit should be inspected carefully before installation. Retain the packing material for future use. Unpacking 1. Take the EPM out of the PE foam. 2. Remove the packing materials. The EPM includes accessories for tower and rack mount (FIG. 25). Selecting Installation Position It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the EPM and extend the life of the batteries. Pleas

• Assembling the Battery Pack 9 NXA-UPS1500 Uninterruptible Power Supply Accessing the Battery Compartment - Step Three 1. Remove the Release tabs on the front panel to expose the screws that secure the Battery Compartment Cover. 2. Remove the screws beneath the Release tabs. 3. Remove the two screws that secure the Battery Compartment Cover 4. Remove the Battery Compartment Co

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 34 NXA-UPS1500 Uninterruptible Power Supply Replacing the Battery in the EPM - Step Three Replacing the Battery in the EPM - Step Four FIG. 37 Replacing the Battery in the EPM - Step 3 FIG. 38 Replacing the Battery in the EPM - Step 4

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 33 NXA-UPS1500 Uninterruptible Power Supply Replacing the Battery In the EPM Replacing the Battery in the EPM - Step One Replacing the Battery in the EPM - Step Two FIG. 35 Replacing the Battery in the EPM - Step 1 FIG. 36 Replacing the Battery in the EPM - Step 2

• AMX NXA-UPS1500, Battery Replacement 24 NXA-UPS1500 Uninterruptible Power Supply Replacing the UPS Battery - Step Two Remove the two screws that secure the Battery Compartment Cover (FIG. 22) Replacing the UPS Battery - Step Three Disconnect the four-pin power connector from the battery wiring harness from the power connector inside the unit, and slide the battery tray out of the unit (FIG. 23): Recycling the Used Battery Contact your local recycling or hazardous waste center for information on proper disposal of the used battery. FIG. 22 Replacing the Battery - Step 2 FIG. 23 Replacing the Battery - Step 3

• AMX NXA-UPS1500, NXA-UPS1500 Uninterruptible Power Supply 2 NXA-UPS1500 Uninterruptible Power Supply Product Specifications NXA-UPS1500 Product Specifications Input: • Voltage Window (DIP Switch selectable): 120V: 110/115/120 Vac +35% ˜ -32% 240V: 220/230/240 Vac +35% ˜ -32% • Inrush Current: 120V: <40A 240V: <20A • Frequency: 45 ˜ 65Hz (50/60Hz auto-sensing) Output: • Voltage Window (AC Mode): 120V: 110/115/120 Vac +8% ˜ -12% 240V: 220/230/240 Vac +8% ˜ -12% • Voltage Window (INV Mode): 120V: 110/115/120 Vac +/-5% 240V: 220/230/240 Vac +/-5% • Max Output Current: 120V: 14A (c

• NXA-UPS1500 Uninterruptible Power Supply 1 NXA-UPS1500 Uninterruptible Power Supply NXA-UPS1500 Uninterruptible Power Supply Overview The NXA-UPS1500 is an Uninterruptible Power Supply (UPS) featuring Double AVR Boost and Double Buck, Pure Sine Wave Output, LCD Display and Hot-Swappable Battery. The NXA-UPS1500 supports RS232 control. The NXA-UPS1500 UPS is available in two model

• Connecting the UPS 19 NXA-UPS1500 Uninterruptible Power Supply RS-232 Communication Port Pin Assignment The NXA-UPS1500 provides a DB9F (9-pin female) connector to communicate via RS-232. The pinout configuration for the RS-232 Communication Port connector is shown in FIG. 20: FIG. 20 RS-232 Communication Port Pin Assignment RS-232 Communication Port Pin Assignment Pin Ass

• AMX NXA-UPS1500, NXA-UPS1500 EPM Installation 32 NXA-UPS1500 Uninterruptible Power Supply Connecting the EPM To the UPS FIG. 34 illustrates connecting the DC Cable on the EPM(s) to the UPS: EPM - Storage Instructions For extended storage through moderate climate(-15 to +30 °C / +5 to +86 °F), the batteries should be charged for 12 hours every 6 months by plugging the UPS power cord into the wall receptacle. Repeat this every 3 months under high temperature (+30 to +45 °C / +86 to +113 °F) environment. FIG. 34 Connect DC Cable

• AMX NXA-UPS1500, Mounting the NXA-UPS1500 11 NXA-UPS1500 Uninterruptible Power Supply Mounting the NXA-UPS1500 Place the UPS Properly The UPS should be placed in a well-ventilated & low humid environment. Unpacking 1. Take the UPS out of the PE foam. 2. Remove the packing materials. 3. Standard Package includes:  Installation Guide  AC Input Power Cord  Accessories for Tower and Rack Mount Accessories for Tower and Rack Mount FIG. 7 shows the accessories for tower and rack-mounting the UPS: FIG. 7 Accessories

More Instructions:

	AMX NXA-UPS1500 Installation manual 11-06-2023 2	DOWNLOAD
	AMX NXA-UPS1500 Manual  28-11-2023 38	DOWNLOAD
	AMX NXA-UPS1500 Specifications 12-11-2023 2	DOWNLOAD

Related Products and Documents (UPS):

Comparable Devices:

Similar Resources:

• Tripp Lite AVR750U (2 pages) Quick Start GuideAVR750UNot suitable for mobile applications.This document explains the most important features of your UPS system. For additional information, download the Owner’s Manual PDF (in English or Spanish) from www.tripplite.com/support/manualsWarranty Registration:register online today for a chance to win a FREE Tripp Liteproduct—www.tripplite …

• TyconSolar UPS-STL48-50 (8 pages) UPS-STL48 UPSPro® Backup Power System ▫ Wireless Base Stations ▫ Surveillance Cameras ▫ Remote Gate Control ▫ Electric Fence ▫ Up to 200W loads Congratulations! on your purchase of the UPSPro® outdoor backup power system. Please take a moment to review this Qwik Install Guide before assembly or battery installation. DANGER! Avoid Powerl …

• Tripp Lite BCINTERNET500 (28 pages) Owner’s Manual1111 W. 35th Street Chicago, IL 60609 USACustomer Support: (773) 869-1234 • www.tripplite.comImportant Safety Instructions2Quick Installation3Basic Operation4Storage & Service7Specifications8Internet Office™• BC Internet™120V Input/Output Standby UPS SystemsCopyright © 2002 Tripp Lite. All rights reserved. Internet Office™and …

• Best Power 0650 SERIES (60 pages) Axxium™Pro UPSMODEL SERIES 06503 kVA – 18 kVA, 50 and 60 HzUninterruptible Power SystemUser / Installation ManualCONTAINS IMPORTANT SAFETY INSTRUCTIONS.SAVE THESE INSTRUCTIONS.Also refer to the Axxium Pro, Fortress, and UNITY/I Safety Information manual, ILS-1081.LTM-1327A© Copyright 2000, Best Power. All rights reserved. …

• Omron S8T-DCBU-01 (17 pages) DC Backup Block for S8TS S8T-DCBU-01 1DC Backup Block for S8TSS8T-DCBU-01DC Backup Block for S8TS for Preventing 24 VDC Outages due to Instantaneous Power Failures• Supplies 24 VDC for a fixed period of time even during AC input outages to considerably improve system reliability.• Block Power Supply Basic Block is connected by the Bus Line Connector.Simp …

• Panamax MB1000 (17 pages) BANKS WIRING1 2POWER MENU MB1000FAU LT0 VOLTS INEST’D BATTERY: 60 MINMB1000 InstructionsA Fully Programmable, Uninterruptible Power Supply, Voltage Regulator & Power ConditionerFeatures:s3URGE0ROTECTIONAND!6-s,I&4.OISE� …

Comments, Questions and Opinions: