2N 914033W Complete Manual

Text of 2N 914033W User Guide:

• 132N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Adding of Sources and Destinations to Session The created session is ready for broadcasting to destination(s). If no more parameters are needed, simply click and the added or another source will startPLAY Sessions playing. See the figure at the very end for two types of sources. The common bar

• 2N 914033W, 322N TELEKOMUNIKACE a.s., www.2n.cz ® VoIP Input The SIP source helps you connect to a VoIP (Voice over IP) PBX as2N Net Speaker ® a VoIP station via the SIP or a VoIP trunk. You have to know the PBX IP address, username and password (if requested) and the port to establish connection to the PBX. Refer to the subsections below for the parameters and setting options. Another option is to allow direct VoIP calls to the by choosing2N IP Audio Manager ® Local SIP input. Then you have to assign the source to a session. Now the 2N IP ® is able to receive direct VoIP calls from VoIP phones. Audio Manager Figure: SIP Source Setting Source Status Refer

• 2N 914033W, 512N TELEKOMUNIKACE a.s., www.2n.cz ® Administration 2N IP Audio manager authorization ® Server authentication to 2N Net Audio Decoder ® or 2N Net Speaker ® – set the password for manager authentication to 2N Net Audio Decoder ® or 2N . Net Speaker ® authentication to server2N Net Audio Decoder ® or 2N Net Speaker ® – set the password for 2N Net Audio Decoder ® or 2N Net Speaker ® authentication to manager. Administrator login authentication password – change the main administrator password of the user.Administrator Database Database displays database t

• 2N 914033W, 742N TELEKOMUNIKACE a.s., www.2n.cz ® For button labels, download HERE 2N Net Mic ® Colour States Action Button colour State Push button A Green on button A Play to the Session that is set in 2N Control ® IP Audio .Panel Push button C Green on function button Play the playlist to the selected zones or 2N Net Audio ® units.Decoder or 2N Net Speaker ® Push button C Yellow on function button Select the zone or 2N Net Audio Decoder ® or 2N Net ® for live announcements. Press butt

• 392N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Event Settings Action Setting Having created an event according to Subs. 6.1. above, specify the contents of the event, i.e. what shall be played and when. Figure: Action Setting and Display The Action Setting and Display figure above shows an example of a scheduled action. The actions are added automatically to the beginni

• 2N 914033W, 442N TELEKOMUNIKACE a.s., www.2n.cz ® Administrator The tab helps you set other parameters andAdministrator 2N IP Audio System monitor the state of the system. The tab contains general settings and administration. Table of Contents: General Settings General Audio Devices Sessions Licences Network Settings Multicast Addresses API Net Audio device settings Communication Properties Expander Settings Net Audio devices connections Net Audio devices scanner Administration 2N® IP Audio manager authorization Database Trace XML

• 72N TELEKOMUNIKACE a.s., www.2n.cz ® Communication Protocols Way of communication Port Protocol Control Panel >> IP Audio Manager 6990 proprietary Console >> IP Audio Manager 6992 proprietary Virtual Sound Card >> IP Audio Manager 6992 proprietary (passive mode)>> Net Audio device IP Audio Manager 6998 proprietary >> Net Audio de

• 292N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Initial View of 2N Net Mic via ® 2N Control Panel ® IP Audio In the window above, set live announcements or playing files to 2N Net Audio ® to the buttons. Click a number to set theDecoder or 2N Net Speaker ® 2N Net Mic ® function key.

• 2N 914033W, 542N TELEKOMUNIKACE a.s., www.2n.cz ® Configuration 2N Net Audio device via Telnet Server By default, the parameters have the following factory values: Value SpkClient 1 (ON) SpkSearch 1 (ON) SpkVolume 1024 SpkDomain Value is empty if device is not connected to server SpkDescr Value is empty if device is not connected to server DHCPClient 1 (ON) StatIPAddr 192.168.1.100 StatIPMask 255.255.255.0 StatIPGate 192.168.1.1 UserName Server Password - SrvIPAddr 192.168.1.2 SrvTCPPort 6999 SrvUserName Speaker SrvPassword - Active 0 RawUdp 0 DstIPAddr 239.0.0.10 DstPort 4242 SrcIPAddr 0.0.0.0 SrcPort 0 Use the integrated Telnet s

• 2N 914033W, 172N TELEKOMUNIKACE a.s., www.2n.cz ® The figure below shows how to add a 2N ® Net Audio Decoder or 2N ® Net Speaker using drag&drop into a zone. In you can see the list of all All Destinations 2N ® Net and RTP destinations and you can use thisAudio Decoders or 2N ® Net Speaker s list to add a to a zone.2N ® Net Audio Decoder or 2N ® Net Speaker Figure: Adding to Zone2N ® Net Audio Decoders or 2N ® Net Speaker s Destination List and Filter The Destination list is included in a simple table and allows you to choose which columns shall be visible. Retrieve the floating menu with the right mouse button and choose &quo

• 2N 914033W, 902N TELEKOMUNIKACE a.s., www.2n.cz ® 2N Net Audio Decoder ® Status LED Indicator LED colour LED status Meaning Yellow shining 2N Net Audio Decoder ® Lite PCB is booting or restarting Green shining 2N Net Audio Decoder ® Lite PCB is playing audio from 2N IP Audio Manager ® Violet shining 2N Net Audio Decoder ® Lite PCB is playing audio from SD card Violet flashing 2N Net Audio Decoder ® Lite PCB is synchronising with SD card Blue flashing 2N Net Audio Decoder ® Lite PCB is ready, but not connected to server Blue shinin

• 2N 914033W, 1072N TELEKOMUNIKACE a.s., www.2n.cz ® Troubleshooting For the most frequently asked questions refer to .faq.2n.cz 2N Net Audio Decoder or 2N Net Speaker is not displayed in the ® ® Destinations & Zones menu Make sure that that DHCP is enabled for your network, or you must know the IP address, subnet mask and gateway which can be assigned to 2N Net Audio ® . When the other LAN devices receive the IPDecoder or 2N Net Speaker ® address automatically, may not2N Net Audio Decoder ® or 2N Net Speaker ® get it due to restrictions set by the IT department. This setting then automatically assigns IP addresses only

• 2N 914033W, 482N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Multicast Setting Options API The settings helps you set the port for connection and API 2N IP Audio System API client restriction. XML API allows an external 3rd party application (e.g. iPhone application, tablet application) to control the system. allows to send basic commands to the HTML API and control sessions. HTML API is primary used by VoIP2N IP Audio Manager ® phones or intercoms but the command can be also sent from a web application. Net Audio d

• 2N 914033W, 572N TELEKOMUNIKACE a.s., www.2n.cz ® Examples direct RTP stream: :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=udp,mux=raw,dst=239.0.0.10:4242} :sout-all :sout-keep :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=udp,mux=raw,dst=192.168.3.224:4242} :sout-all :sout-keep :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=udp,mux=raw,dst=192.168.3.224:4242} :sout-all :sout-keep :sout=#transcode{vcodec=none,acodec=mp3,ab=128,channels=2,samplerate=44100}:rtp{dst=239.0.0.10,

• 2N 914033W, 262N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Adding English Teachers to Set of User Inputs Internet Radio The source allows you to insert URI of the selected radio and set radioInternet radio delay (in ms) – characterises the radio buffer size. The supported radio formats are and . In exceptional cases, the services providing internet radio mp3 wma managemen may fail. For this reason, it is good to have a backup of at least one oft and playback the supported Internet radios from http://www.mikesradioworld.com/ Figure: Internet Radio Parameters

• 2N 914033W, 212N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: RTP Destination Settings Properties of RTP Destinations This section is devoted to RTP destinations. Destination name – this parameter shows the name of the RTP destination and can be changed. Audio codec – . You can choose one of   allowsyoutoselect therequired audio codec the following 4 options: G711 u-Law G711 A-Law Liner PCM 16 bit Stereo Liner PCM 16 bit Mono IP Address – set the multicast IP address. Port – set the port. TTL − set the TTL (Time to Live) for multicast packets: -1 means system default and we recommend you not to change this parameter. This

• 2N 914033W, 812N TELEKOMUNIKACE a.s., www.2n.cz ® 1. 2. 3. 2N Net Speaker Connection ® 2N Net Speaker ® can be connected to a standard local area network using a LAN interface via the RJ–45 connector on the back panel. Always use CAT–5d or higher class cables for reliability reasons. The LAN interface is equipped with the Auto MDIX function for automatic detection of a straight or crossed cable. The LAN interface can also be used for the 2N Net Speaker ® power supply through active network elements or injectors meeting the IEEE 802.3af standard. 2N Net Speaker ® can be fed using active network elements or PoE injectors via th

• 2N 914033W, 352N TELEKOMUNIKACE a.s., www.2n.cz ® UDP&TCP mode. The recommended maximum value is 1448 bytes. Headers Complete domain – specify the domain to be used within the and From To headers. Send information – – activate the P–Asserted–IdentityP–Asserted–Identity header for the INVITE message. This header is used for CLIR transmission to the counterparty, giving it information on the calling number even in the case of active CLIR (Calling Line Identification Restriction).

• 382N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: Scheduler Tab Set event start – click to display the event setting option to the left. Set theEvent type, starting time and repeating intervals. The setting options depend on the action type: Action setting options: Not scheduled – this event will never be performed. Daily – the event will start at the se

• 2N 914033W, 872N TELEKOMUNIKACE a.s., www.2n.cz ® Description of Motherboard ConnectorsFigure: 2N Net Audio Decoder ® Lite PCB and Inputs 12V/2A DC power supply adapter connector Alternative power supply connection terminals Relay output with galvanic isolation for external 24V/1A AC/DC load switching Digital input 5 – 24V (without galvanic isolation) for external sensor/button, etc. 10/100BASE–TX LAN RJ–45 connector RESET button Line output for external amplifier Universal buttons with programmable functions (volume/channel) MicroSD card slot for higher internal memory capacity Infrared signal receiver for remote control Operational status colour LED indicator

• 2N 914033W, 252N TELEKOMUNIKACE a.s., www.2n.cz ® Figure: File Manager In this way you can fill the server with mp3 files even remotely via the WAN. Sets of User Inputs Set of user inputs is a group of rules rather than an actual input. The rules define users with the right to use the input and also assign inputs to rooms if necessary. Example: Suppose a language school has English and German classrooms. There are 4 teachers in the school: Mr. Cook, Ms. Scott, Hr. Himmel and Fr. Moselle. Use the set of user inputs to create and .English classroom input German classroom input Enable the "English classroom" virtual input for Mr. Cook

• 2N 914033W, 142N TELEKOMUNIKACE a.s., www.2n.cz ® that the Session will occupy the destinations assigned to italways guarantees (the source will play in the destination). The priority range is <1;10>, where priority 10 is automatically assigned to broadcasting.Freeride role Channel – set the channel for each session. 2N ® Net Audio Decoder and 2N ® supports 4 channels for 4 different sources. Set the channel forNet Speaker the or units on the 2N ® Net Audio Decoder 2N ® Net Speaker Destinations & tab or by a remote controller on the site.Zones Fade – set the session fade. The parameter can be used for a gradual sound volume change. The

• 952N TELEKOMUNIKACE a.s., www.2n.cz ® 2N Net Audio Decoder ® mono PCB Parameters Parameter Value Board dimensions 100 x 80 x 15 mm External power supply 12V DC / 2A LAN supply not supported Status signalling LED at the front Local control 2 buttons at the front Remote control infrared sensor at the front Headphone/Line output 3.5mm jack at the frontstereo LAN connection RJ�

• 2N 914033W, 492N TELEKOMUNIKACE a.s., www.2n.cz ® Net Audio devices connections Set the connection parameters for in2N Net Audio Decoder ® or 2N Net Speaker ® the passive mode (refer to the scanner below). the parameters to establishSave connection to 2N Net Audio Decoder ® or 2N Net Speaker ® . Parameters: Connection timeout – define the time interval between the connection making attempts. IP address – set the IP2N Net Audio Decoder ® or 2N Net Speaker ® address. IP port – set the port; 6998 is2N Net Audio Decoder ® or 2N Net Speaker ® the default value. Automatic firmware upgrade – disable the 2N Net Audio Decoder ® or 2N ® firm

• 2N 914033W, 162N TELEKOMUNIKACE a.s., www.2n.cz ® Destinations & Zones This tab helps you administer by2N ® Net Audio Decoders or 2N ® Net Speakers assigning them to zones and changing their parameters. The tab includes a Zones tree, a Net Audio Decoder and Net Speaker panel (speakers, zones including contents) and a Zone/Net Speaker Properties panel. Zones Zones helps and assign divide objects logically 2N ® Net Audio Decoders or 2N ® to zones for easier handling (by assigning zones to ) inNet Speakers Sessions extensive installations. Basically, zones can be regarded as 2N ® Net Audio Decoder o groups.r 2N ® Net Speaker Fig

• 2N 914033W, 1032N TELEKOMUNIKACE a.s., www.2n.cz ® 2N Net Audio Encoder ® Parameters Parameter Value Dimensions 209 x 142 x 65 mm External power supply 12 - 32V DC / 1A LAN supply PoE IEEE 802.3af LAN connection RJ–45 connector on front panel, TX with Auto–MDIX function Frequency range 20Hz – 20kHz (+/– 0.5dB) Harmonic distortion 0.05% @ 1kHz Signal–to–noise ratio 91dB Digital input one 5 to 48V DC digital input, galvanically isolated or 1 contact input Digital output max. 48V/1A relay output NO/NC, galvanically isolated Headphones outpu

• 2N 914033W, 992N TELEKOMUNIKACE a.s., www.2n.cz ® Status LED Indicators LED colour LED status Meaning Yellow shining 2N Net Audio Decoder ® mono PCB is booting or restarting Green shining 2N Net Audio Decoder ® mono PCB is playing audio from 2N IP Audio Manager ® Violet shining 2N Net Audio Decoder ® mono PCB is playing audio from SD card Violet flashing 2N Net Audio Decoder ® mono PCB is synchronising with SD card Blue flashing 2N Net Audio Decoder ® mono PCB is ready, but not connected t

Related Products and Documents (Speakers):

Comparable Devices:

Similar Resources:

• Talius Tal-28BT (4 pages) Tal-28BT User Manual Thanks for purchasing Bluetooth mini speaker from us. Please read the following instructions to learn how to configure and use the product more effectively. Product Overview 13 12 16 14 15 MODE …

• Mr Handsfree BLUE BEAT MINI (2 pages) DECLARATION OF CONFORMITYWe, the undersignedCompany: TE-GROUP nvAddress: Kapelsestraat 61, 2950 Kapellen - BELGIUMdeclare, that the following equipment:Product Name: BLUE BEAT MINIProduct Type: Bluetooth® Stereo SpeakerConforms with the requirements of European Council Directive 99/5/ECJoseph van Oosterum, CEO TE Group NV, September 2013----------------- …

• AmazonBasics BSK30 (76 pages) Product NameProduct Name (FR)Product Name (DE)Product Name (IT)Product Name (ES)Product Name (JP)Product Name (CH)ASINPortable Bluetooth Speaker (BSK30)B01GF5ACUGB01GF5AFB2B01GF5AGN4 …

• LG RM2 (2 pages) www.lg.comCopyright © 2020 LG Electronics Inc. All Rights Reserved.1907_Rev01MFL71437210SIMPLE MANUALHIGH POWER SPEAKER SYSTEMPlease read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this m …

• ACR Electronics 2204B (13 pages) Portable Safety Megaphone Product Numbers 2204, 2204B, 2206, 2206B, 2208, 2208B Product Support Manual Y1-03-0340 Rev. C ATA Code 25-60-01 Artex Products / ACR Electronics, Inc. 5757 Ravenswood Road, Fort Lauderdale, FL 33312 Phone (954) 981-3333, Fax (954) 983-5087 www.acrartex.com …

• Genelec 8020A (2 pages) Speaker placementGenelec Document Genelec Document BBAQS8020001. Copyright Genelec Oy 5.2005. All data subject to change.Do not place the monitors near reflectivesurfaces or behind objects!4321Nearfield setting-2 dB Bass Tilt:ONOFFTONE CONTROLVertical angle8020AAnalog AudioXLR Male toInput connectorAnalog AudioXLR Female toOutput connectorConnecting the 8020 …

Comments, Questions and Opinions: