3i BSE-150 Installation Manual

Text of 3i BSE-150 User Guide:

• 3i BSE-150, Pag. 1 Instruction Manual BSE-150 ENGLISH ACTIVE INDOOR AND OUTDOOR ACTIVE INDOOR AND OUTDOOR ACTIVE INDOOR AND OUTDOOR INFRARED BARRIER WITH INFRARED BARRIER WITH INFRARED BARRIER WITH 3 BEAMS OF PROTECTION 3 BEAMS OF PROTECTION 3 BEAMS OF PROTECTION INSTALLATION INSTALLATION INSTALLATION MANUAL MANUAL MANUAL BSE-150

• 3i BSE-150, Pag. 2 Manuale istruzioni BSE-150 ENGLISH 1 - Product Discription The BSE-150 is an active indoor & outdoor infrared detector with 3 beams of protection. It has regulations for : Vertical axial from (+10° to –10°), Horizontal axial from (+90° to –90°), and for the trigger response time from 1 to 5 (See Par. 5). Cover Led indication of signal intensity Terminal B. Pulsante antisabotaggio Lens Vertical axial screw regulation Front cover fixing screw Cable Hole Regulation connector for tester Trigger response time regulation Horizontal axial screw regulation 2

• 3i BSE-150, Pag. 3 Instruction Manual BSE-150 ENGLISH Avoid mounting the unit on columns that my not be stable. Avoid mounting the unit in direct sun light or high luminosity light sources. Outdoor installations: Due not install the BST-100 where animals, trees, bushes or other plants can interrupt the line of sight of the barriers. Indoor installations: Avoid that instable objects intrupt the line of sight of the barriers. 3 - Installation precautions Avoid that a receiver can, by error, receive the signal transmitted form th

• Pag. 4 Manuale istruzioni BSE-150 ENGLISH 3.1.1 Remove front cover 3.1.2 Using the metal base, mark on the wall the position of the fixing holes. See below: 3.1.3 Insert the connection cable that comes from the control panel. 3.1.4 Fix to the wall the metal base of the sensor. ● Installation on column 3.2.1 Drill hole for the cable on the

• 3i BSE-150, Pag. 5 Instruction Manual BSE-150 ENGLISH Replace the front cover and test if the active infrared barrier is functio- ning correctly. If not,it must be recalibrated. NOTE: The more precise is the alignment, the more intense will be the luminosity of the Red Led. It is best to regulate the sensor until the luminosity is at a maximum. Testing with voltmeter 1. Insert the tester cable points based on the polarity in the holes marked (+ and -) 2. Regulate the vertical and horizontal angles until the voltage is at a maximum. Vi

• 3i BSE-150, Pag. 6 Manuale istruzioni BSE-150 ENGLISH 6 - Dimension 270mm 230mm 89mm Support Column 3- 8 55 mm 95mm Fixing holes 2 x 4,5mm Material for fixing to support column 5 - Regulation of trigger responce 1 Run (6,9m/sec.) 2 Fast Walk (1,2m/s) 3 Normal walk (0,7m/s) 4 Slow Movement (0,3-0,5m/s) 5 Slow Walk (0,1-0,3m/s) With the below figures, you may regulate the trigger response time as desired. 1 5 2 4 RESPONSE TIME 3 Verify the effects on the barrier based on the selected walk. If you are not satisfied with the

• 3i BSE-150, Pag. 7 Instruction Manual BSE-150 ENGLISH Problem Cause Solution The indicator LEDs of transmit- tor and receiver do not light 12 Vdc. not present or defective power source present. The ALARM LED does not light and the alarm trigger relay does not change state if both beams are interupted. 1- Check if the receiver is getting the barrier signal from another near by transmitter. 2- Check if both beams are interup- ted at the same time. 3- Check if the trigger response time is correctly set. 1- Remove the transmitter that is causing the interference. 2- Make sure that both beams are interupted 3- Regulate the trigger repo

• Pag. 8 Manuale istruzioni BSE-150 ITALIANO ITALIANO Tre i Systems is not responsable for inappropriate use or installation of the products manufactured. For any problems contact the nearest authorized Tre i Systems sales office or service center. Tre i Systems reserves the right to change or make improvments to this product without previous notice. Last revisi

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• Exibel C2664SC SONY 420TVL (4 pages) 1231234Ver. 201201GREAT BRITAIN · For consumer contact, please visit www.clasohlson.co.uk and click on customer service.EnglishSecurity CameraArt.no 36-4811 Model C2664SC SONY 420TVLPlease read theentire instruction manual before use and save it for future reference. Wereserve theright for any errors in text or images and for making any necessar …

• TWIG Protector EasyS (4 pages) TWIG Protector EasyS Quick Guide TWIG Protector EasyS is a complete personal alarm device designed to protect protect lone workers, the vulnerable and those needing care. Equipped with dedicated simple keys the device is suitable for multiple lone worker and personal safety needs. Manufacturer: Twig Com Ltd. 24910 SALO, Finland www.twigc …

• Swann SW231PC4 (28 pages) SW231PC4 & SW231-UD4www.swannsecurity.com xxxxx-xxxxx-xxxxx-xxxxxxxxOperating Instructions™™Advanced security made easyPC-DVR4-NetOperating InstructionsSoftware Version 6.3.0.7SW241-PC4™SW241-UD4™ …

• Bosch DS860 Series (4 pages) Installation Instructionsfor the DS860 SeriesTriTech Microwave/PIR Intrusion Detectors1.0 Specifications• Dimensions (HxWxD): 5 in. x 2.8 in. x 2.2 in.(12.7 cm x 7.1 cm x 5.6 cm)• Input Power: 9 to 15 VDC, 16 mA DC nominal(up to 48 mA DC during walk testing ortrouble conditions). Useonly anApproved Limited Power Source.• Standby Power: No internal stan …

• SmartCell SC-32-0120-0001-99 (2 pages) Sounder and Wall BeaconInstallation GuidePart number Product descriptionSC-32-0120-0001-99SC-32-0220-0001-99SmartCell RED Sounder and Wall Beacon (VAD White Flash)SmartCell WHITE Sounder and Wall Beacon (VAD White Flash)1 Pre installation2 Components21!Installation must conform to applicable local installation codes and should only be installe …

• RA Technik HD-S1P (2 pages) Water & Temperature Sensing Alarm System (Battery Operated)(Product Code HD-S1P & HD-S2P)1. Place the battery [b] into the sliding door [a] with the positive [+] side facing away from you1. Before placing Detect onto tundish, carefully pull the sensor board [f] slightly away from the casing to [e].2. Insert battery door [a] into the main casing body …

Comments, Questions and Opinions: