Beast Hover-1 HY-X10 Operation Manual

Text of Beast Hover-1 HY-X10 User Guide:

• 4 OPERATING PRINCIPALS The device uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user's center of gravity. The device also uses a control system to drive the motors that are located within the wheels. The device has a built-in inertia dynamic stabilization system that can help assist with balance when moving forward and backwa

• Beast Hover-1 HY-X10, 19 CHARGING YOUR Hover-1 BEAST BATTERY CARE / MAINTENANCE CHARGING THE DEVICE • Ensure that the charging port is clean and dry. • Make sure that there is no dust, debris or dirt inside the port. • Plug the charger into a grounded wall outlet. • Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz). • Align and connect the 3-pin charging cable into the charging port of the Hover-1 Beast. DO NOT FORCE OR BEND THE CHARGING CABLE INTO THE CHARGING PORT, AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK. • The charging indicator light should change to RED, indicating that your device is now being charged. • When the RED indicator light on your charger turns t

• Beast Hover-1 HY-X10, 8 It is important that you fully understand all elements of your Hover-1 Beast. If these elements are not used correctly, you will not have full control of your Hover-1 Beast. Before you ride, learn the functions of the various mechanisms on your scooter. Practice using these elements of your Hover-1 Beast at slower speeds in a flat, open area before taking the device out in public areas. PRE-RIDE CHECKLIST Ensure that your Hover-1 Beast is in proper working order each and every time you ride. If a part of the scooter does not function correctly, please contact our

• Beast Hover-1 HY-X10, 14 FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your device, be sure to familiarize yourself with the operating procedures. OPERATING YOUR DEVICE Make sure the device is fully charged before your initial use. For charging instructions, please follow details under CHARGING YOUR DEVICE. Stand directly behind your device and place one foot on the corresponding foot mat (as desc

• Beast Hover-1 HY-X10, 22 CARE & MAINTENANCE WARNING Avoid using water or other liquids for cleaning. If water or other liquids enter the Hover-1 Beast, it will cause permanent damage to the internal components. WARNING Users who disassemble the Hover-1 Beast scooter without permission will void the warranty. The Hover-1 Beast comes with a replaceable lithium-ion battery. If you are experiencing problems with your battery, please contact our customer service department for steps on how to replace this battery

• HELMETS SAVE LIVES! Always wear a properly tted helmet that complies with CPSC or CE safety standards when you ride your bicycle. Correct Fitting: Make sure your helmet covers your forehead. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.

• Beast Hover-1 HY-X10, 23 This product comes with a 30 day limited replacement warranty for manufacturer’s defects. This includes defects to the motor, gyroscopic sensor battery, etc. This product comes with a 120 day parts and labor warranty. Shipping & handling costs are not included. The condition of this warranty and our responsibilities under this warranty are as follows: Manufacturer's warranty is non-transferable. And this warranty is limited to the original purchaser only. * You must be able to prove the date of original purchase of the device with a dated receipt. * Warranty period begins on date of purchase, not date of firs

• Beast Hover-1 HY-X10, 18 While riding your Hover-1 Beast, if there is a system error or illegal operation performed the device will prompt the user in a variety of ways. You will notice the Running Indicator Light will turn RED and you will hear a beep sound alerting you to take precaution and cease operation, which may make the device stop suddenly. The following are common occurrences where you will hear the Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure or e

• Beast Hover-1 HY-X10, 3 PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death. Thank you for purchasing the Hover-1 Beast Electric Scooter. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the Hover-1 Beast Scooter. • In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the Hove

• 6 PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY TURNING YOUR DEVICE ON/OFF Power On: Take your device out of the box and place it flat on the floor. Press the power button (located on the rear of your device) once. Check the LED indicator (located in the center of your device). The battery indicator light should be lit, indicating the device is powered on. Power Of

• Beast Hover-1 HY-X10, 21 BATTERY REPLACEMENT FCC STATEMENT The Hover-1 Beast comes with a replaceable lithium-ion battery. If you are experiencing problems with your battery, please contact our customer service department for steps on how to replace this battery, This battery should only be replaced using the same model from the same manufacturer listed below. Battery Manufacturer: Shenzhen Elite Electronic Co., Ltd. Battery Model: HY-CHH-1002U To replace your battery, turn your Hover-1 Beast upside down, and remove the two screws that hold your battery door in place. Disconnect your lithium ion battery and remove it. Replace your battery with a new battery pro

• 24 We offer a warranty on our products in accordance with the following conditions: 1) The warranty does not cover over-charging, or damages due to improperly maintaining lithium-ion battery installed in unit. The warranty does not cover tires and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear

• Beast Hover-1 HY-X10, 5 OPERATING PRINCIPALS The device uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user's center of gravity. The device also uses a control system to drive the motors that are located within the wheels. The device has a built-in inertia dynamic stabilization system that can help assist with balance when moving forward and backwards, but not while turning. TIP – To increase your stability, you must shift your weight in order to overcome the centrifugal force during turns

• Beast Hover-1 HY-X10, 12 • Young children and the elderly should not operate the Hover-1 Beast. • At higher speeds, always take into consideration longer stopping distances. • Do not step forward off of your Hover-1 Beast. • Do not attempt to jump on or off your Hover-1 Beast. • Do not attempt any stunts or tricks with your Hover-1 Beast. • Do not ride the Hover-1 Beast in dark or poorly lit areas. • Do not ride the Hover-1 Beast near or over potholes, cracks or uneven pavement or surfaces. • Do not operate your Hover-1 Beast off-road

• Beast Hover-1 HY-X10, 25 [email protected] 2) Hover-1 will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and will be asked to send the product to Hover-1. IMPORTANT: Hover-1 will only accept parcels that have an RMA number. Please observe the following when sending the product: 1) Send the product suitably packaged with carriage and insurance paid. The charger MUST be included. Use only a carrier that provides tracking. 2) Mark the RMA number on the outside of the package in such a way that is visible and clearly legible. 3) You must enclose a copy of the receipt as proof of purchase. 4)

• Beast Hover-1 HY-X10, PERFORMANCE DESIGN Hover-1 Beast is a two-wheel balancing electric scooter. It provides a convenient, stable form of transportation, responsive to weight and angles, making it easier and safer to control, allowing you to travel up to 11 miles at up to 7.45 mph. Hover-1 Beast is designed to be easily controlled, providing a safe stable form of travel. With a zero degree turning radius, you can operate Hover-1 Beast in narrow spaces without moving forward at all. The built-in sensors are responsive with a balancing system. Accelerate or decele

• Beast Hover-1 HY-X10, 2 PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death. Thank you for purchasing the Hover-1 Beast Electric Scooter. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the Hover-1 Beast Scooter. • In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the

• Beast Hover-1 HY-X10, 9 The first rule in safe riding is to use common sense. Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws. Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations. • For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death. • Obey all local traffic laws. Obey red and green lights, one-way streets, s

• 10 Think about safety when you ride. You can prevent many accidents if you think about safety. Below is a helpful checklist for Compact riders. SAFETY CHECKLIST • Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Hover-1 Beast. • Do not ride too fast -- with increased speed comes increased risk. If you

• Beast Hover-1 HY-X10, 7 The H1 has a powerful built-in wireless speakers so you can play your music while riding. PAIRING THE SPEAKER 1. Ensure your H1 is turned off. If it is not, please turn off your Hover-1 first before pairing. 2. Turn on your H1 and the speakers will “Ping” to announce that it’s waiting for a Bluetooth ® connection. This will indicate your Beast speaker is now in pairing mode. 3. Place the Beast and the Bluetooth ® device to which you would like to pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart during pairing. 4. Ensure Bluetooth ® is enabled on your phone or music devi

• Beast Hover-1 HY-X10, 1 PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death. Thank you for purchasing the Hover-1 Beast Electric Scooter. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the Hover-1 Beast Scooter. • In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the Hover-1 Beast safely. • You can learn operating skil

• Beast Hover-1 HY-X10, 17 SAFETY ALERTS While riding your Hover-1 Beast, if there is a system error or illegal operation performed the device will prompt the user in a variety of ways. You will notice the Running Indicator Light will turn RED and you will hear a beep sound alerting you to take precaution and cease operation, which may make the device stop suddenly. The following are common occurrences where you will hear the Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure or errors. • Unsafe riding surfaces (uneven, too steep, unsafe, etc.) • When you step on the device, if the platform is tilted more than 17 de

• Beast Hover-1 HY-X10, 15 FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your device, be sure to familiarize yourself with the operating procedures. OPERATING YOUR DEVICE Make sure the device is fully charged before your initial use. For charging instructions, please follow details under CHARGING YOUR DEVICE. Stand directly behind your device and place one foot on the corresponding foot mat (as described in the diagram below). Keep your weight on the foot which is still on the ground, otherwise the device may begi

• Beast Hover-1 HY-X10, 13 FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your device, be sure to familiarize yourself with the operating procedures. OPERATING YOUR DEVICE Make sure the device is fully charged before your initial use. For charging instructions, please follow details under CHARGING YOUR DEVICE. Stand directly behind your device and place one f

• Beast Hover-1 HY-X10, 20 WARNING Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death. WARNING SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY. CHARGING THE DEVICE • Ensure that the charging port is clean and dry. • Make sure that there is no dust, debris or dirt inside the port. • Plug the charger into a grounded wall outlet. • Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz). • Align and connect the 3-pin charging cable into the charging port of the Hover-1 Beast. DO NOT FORCE OR BEND THE CHARGING CABLE

• Beast Hover-1 HY-X10, 11 • Do not abuse your Hover-1 Beast, doing so can damage your unit and cause failure to the operating system leading to injury. Physical abuse, including dropping your Hover-1 Beast, voids the manufacturer warranty. • Do not operate in or near puddles of water, mud, sand, stones, gravel, debris or near rough and rugged terrain. • The Hover-1 Beast can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please lift your Hover-1 Beast over and past the obstruction. • Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads or in extreme heat or cold. • Bend your knees when riding on bumpy or uneven pavement to absorb t

Related Products and Documents (Scooter):

Comparable Devices:

Similar Resources:

• Leader Fox Runner (24 pages) Electric Bicycle Operating Instructions Under the law, the dealer is obliged to attach the LEADER FOX Electric Bicycle Operating Instructions to every product Runner E – BIKE POWER RIDE …

• Crivit IAN 103909 (18 pages) TROTTINETTE À GRANDES ROUESDELTA-SPORT HANDELSKONTOR GMBHWragekamp 6 • D-22397 HamburgVersion: 02/2015Delta-Sport-Nr.: BS-2036 TROTTINETTE À GRANDES ROUESMode d‘emploi BIG-WHEEL-SCOOTERGebrauchsanweisung BIG WHEEL STEPGebruiksaanwijzingBIG WHEEL SCOOTERInstructions for use Dépliez la page avec les illustrations avant la lecture et inform …

• Bat-caddy X3 Pro (29 pages) User Manual X3 Series (X3, X3-LCD & X3R) X3/X3-LCD X3R ATTENTION: PLEASE FOLLOW ALL ASSEMBLY INSTRUCTIONS AND READ AND UNDERSTAND THE OPERATING INSTRUCTIONS BEFORE YOU OPERATE THE CADDY, EITHER MANUALLY OR BY REMOTE CONTROL. …

• SmartGyro Speedway 2.0 (134 pages) el patinete eléctrico más divertido y funcionalPotente motorBrushless de 800WHasta 45 Kmde autonomíaBatería de litio13000 mAh /48VLuces LEDdesconectablesLEDRuedasneumáticas 10”DisplaymultifunciónEstructuraplegable3 modosde velocidad123Freno de discodelantero y traseroDoble suspensióndelantera y trasera4 Focos ledIntermitentesv.2.0 …

• Robstep Robin M1 (71 pages)  Thank you for your purchasing Robstep-M1 Robstep-M1 is an intelligent robot that balances automatically product. This User Manual providing you information about how to assemble and use Robstep-M1 safely, and how to maintain it . Ifyou want to get the most pleasure of riding Robstep-M1 , please read it carefully. It is very important for you t …

• Pinolino Charlie (10 pages) AufbauanleitungAssembly planInstructions de montageInstrucciones de montajeIstruzioni di montaggioMontagevoorschriftMini-Laufdreirad ‘ ’ CharlieMini-balance training tricycle ‘ ’ • Mini-tricycle ‘Charlie’ • Mini-triciclo ‘Charlie’ • Mini- triciclo ‘Charlie’ • Mini- driewieler ‘Charlie’CharlieArt.-Nr. • Item No. • N° d´ …

Comments, Questions and Opinions: