Manualios.com

aurum INTEGRIS CDP Owner Reference Manual

aurum INTEGRIS CDP Manual Online:

4.1, 1091 votes
aurum INTEGRIS CDP User Manual
aurum INTEGRIS CDP User Guide
aurum INTEGRIS CDP Online Manual

Text of aurum INTEGRIS CDP User Guide:

  • aurum INTEGRIS CDP, 1 Table of Contents 1 Introduction 1 Unpacking and Repacking 1 Placement 2 Front Panel Features and Definitions 7 Back Panel Features and Definitions 11 CD Transport Mechanism Operation 13 Integris CDP R-676 Remote Control 17 Menu – Optional User-Settings 23 Specifications 24 Warranty Aurum Acoustics 10 Minerals Road Conception Bay South Newfoundland and Labrador Canada A1W 5A1 Tel: 709 834 8244 Fax: 709 834 8246 [email protected] www.aurumacoustics.com INTEGRIS CDP – Owner’s Reference Guide

  • aurum INTEGRIS CDP, 1 Introduction Thank you for your purchase of the Integris CDP Compact Disc Player and Linestage Preamplifier. This Owner’s Reference Guide contains information that will permit you to obtain maximum performance and utility from the Integris CDP’s extensive features. Unpacking and Repacking Do not discard any packing materials! You will need them to transport the unit, should that be necessary. Shipping without all proper packaging materials may result in damage. . 1. Open the box along the top flaps and remove the top section of protective foam. Remove

  • aurum INTEGRIS CDP, 2 FRONT PANEL FEATURES AND DEFINITIONS 1 STANDBY SELECTOR 2 STANDBY LED 3 VACUUM FLUORESCENT DISPLAY 4 DISPLAY DIMMER 5 CD PLAY 6 CD STOP 7 CD PAUSE 8 CD SCAN/SKIP REVERSE 9 CD SCAN/SKIP FORWARD 10 CD REPEAT 11 CD TIME 12 MENU 13 VOLUME UP 14 VOLUME DOWN 15 BALANCE LEFT 16 BALANCE RIGHT 17 INPUT SCROLL FORWARD 18 INPUT SCROLL REVERSE 19 PHASE INVERSION

  • aurum INTEGRIS CDP, 3 Front Panel Features and Definitions 1. Standby Selector (STANDBY) The STANDBY button changes the Standby mode from Standby to Operate. In Standby, the Integris CDP is in a partial sleep mode as an alternative to turning its power fully off via the rear panel mains switch. All circuits are left on and warm for maximum performance upon immediate use. The unit is non-responsive to all commands except another push of the STANDBY button. Upon returning to the Operate mode, the same Volume, Balance, and Input settings remain in effect as when entering Standby. 2. Standby LED In Standby mode, the blue LED is on. In Operate mode, the LED is off. 3. Va

  • aurum INTEGRIS CDP, 4 8. CD Scan/Skip Reverse (REV) 9. CD Scan/Skip Forward (FF) These buttons enable two functions during CD playback: • Track Skip – Apply a momentary contact of approximately ¼ second or less to the REV or FF buttons to have the transport return to the beginning of the track already playing (REV) or advance to the beginning of the next track (FF). Press repeatedly to skip by several tracks. • Scan – Hold either button down for 1 second or more to move within a track. Initial scanning rate is 3X normal speed and increases to 15X when held for several seconds. One of the reverse or forward scan s

  • 5 Single presses of the VOL buttons will result in changes relative to the Volume setting range: Volume range Setting Change -20 to +20 dBu 0.5dB -40 to -20 dBu 1.0dB -60 to -40 dBu 2.0dB Holding the buttons continuously will temporarily increase the size of the volume control increments to allow for rapid volume adjustmen

  • aurum INTEGRIS CDP, 6 Back Panel Features and Definitions 1 MAINS POWER INLET 2 POWER SWITCH 3 MAINS POWER FUSE -1/4 A 4 VOLTAGE SELECTOR 5 UNBALANCED INPUT 1 6 UNBALANCED INPUT 2 7 UNBALANCED INPUT 3 8 BALANCED INPUT 1 9 BALANCED INPUT 2 10 DIGITAL INPUT S/PDIF 1 11 DIGITAL INPUT S/PDIF 2 12 DIGITAL INPUT BNC 13 DIGITAL INPUT AES /EBU 14 DIGITAL INPUT TOSLINK 15 DIGITAL OUTPUT S/PDIF 16 DIGITAL OUTPUT TOSLINK 17 BALANCED OUTPUT 18 UNBALANCED OUTPUT 19 COM PORT 20 EXPANSION SLOT

  • aurum INTEGRIS CDP, 7 Back Panel Features and Definitions 1-4 Mains Power Panel The Integris CDP is designed for use with all major AC power systems. The unit has built-in RFI filtering for superior performance. 1. Mains Power Inlet A power cord with an IEC 10-15Amp female plug is required to connect AC power to the Integris CDP. We recommend quality aftermarket power cords and direct connection to a quality AC outlet for best performance. 2. Power Switch The mains rocker switch illuminates in the On position. The mains switch may be used to isolate all of the Integris CDP’s internal circuits from

  • aurum INTEGRIS CDP, 8 10-11. S/PDIF 1-2 These connections accommodate the most common digital interconnect interface using RCA-connector equipped cables and 75ohm load impedance. These Inputs also accommodate PCM sample rates different than the S/PDIF standard of 16 bit/44.1kHz. 12. BNC This connection is essentially the same as S/PDIF 1-2 but with an alternate cable connector, the BNC. 13. AES/EBU This is a balanced digital connection, as found on some digital sources requiring an XLR equipped digital interconnect and 110ohm load impedance. 14. TOSLINK Th

  • 9 type found on audio amplifiers. These outputs, using connectors from Cardas Audio, provide a very high level of performance in most situations. 19-20. Upgrade Potential Aurum Acoustics has designed the Integris CDP to be modular, expandable, and upgradeable. The internal digital and analog systems are designed for possible upgrades and enhancements. Other ne

  • aurum INTEGRIS CDP, 10 CD Transport Mechanism Operation The internal CD transport is designed to deliver the finest performance possible from the CD format. It uses the robust and accurate top-loading Philips CDPro-2M transport and laser module on an Aurum Acoustics- designed mechanical isolation system. The transport module is secured to a massive machined aluminum transport-tray for inertial stability. The transport-tray floats above the bottom panel on flexible mounts and is held completely independent of the top panel and lid. The manually placed mag

  • aurum INTEGRIS CDP, 11 The VFD will show the general parameters of the CD including number of tracks and total disc time as per the graphic below. This is also the default display mode for CDs in Stop mode. CD transport commands can now be applied from the remote or front panel control. If the disc has failed to initialize properly, the VFD will deliver a NO DISC message. If any unusual noise was heard during the attempted initialization, the disc and clamp may not have been placed properly. Readjust the positioning of disc and clamp and close the lid. 5. Di

  • aurum INTEGRIS CDP, 12 Integris CDP R-676 Remote Control Overview The Integris CDP R-676 remote control handset was developed in conjunction with Logitech Harmony, a leader in multi-function remote control solutions. Aurum Acoustics has programmed the remote with a command set tailored for easy control of the Integris CDP. The instructions that follow are limited to the operation of the Integris CDP. The remote’s infrared transmitter system allows one way communication only. The user must watch the main unit’s VFD for visual feedback of commands sent via remo

  • aurum INTEGRIS CDP, 13 Batteries A set of 4 AAA 1.5V alkaline batteries is included. Under general use, battery life expectancy is approximately 3 months. Alkaline batteries are the recommended replacement. The remote will provide a Replace Battery message after the operating voltage drops to a critical level. From this point on, weak batteries may continue to provide operation for several days; however full LCD display capability is lost and the infrared transmitter will not perform at its best. Initial Turn-on and Standby Aft

  • aurum INTEGRIS CDP, 14 Unique Button Assignments Nearly all Integris CDP front panel controls are duplicated on the remote. The remote also provides direct CD track entry and a Mute option. The graphic of the R-676 on the following page illustrates the function of all buttons related to operation of the Integris CDP. Non-Usable Buttons: On the R-676 graphic, a number of buttons have been over-marked with X. These buttons are not assigned to any commands for the Integris CDP. They are available for use with other devices the user may load into the remote.

  • 16 MENU ─ Optional User Settings The Integris CDP has several programmable features that can provide extra utility and value to many users. The product is fully useable without ever entering into the MENU setup; however, these user-customizable features can increase user-satisfaction. MENU of optional setup areas Input Name Setting Analog Level Trim Volume Control Byp

  • aurum INTEGRIS CDP, 17 Setting Input Names The default names of the Inputs match the rear panel markings. Users may prefer to personalize the names to more closely match their input device by creating a new name up to 12 characters in length. In the following example the UNBALANCED 2 input name is changed to FM TUNER. 1. Press the ●MENU button to access the Menu structure. Beyond this point the same button will be referred to as ●ENTER. 2. To access NAMES menu, Press the ●ENTER button. 3. The first Input on the list is CD. Press the ►RIGHT button twice to scroll to UNBALANCED 2. 4. At the correct Input selection, press ●ENTER to proceed to

  • aurum INTEGRIS CDP, 18 Setting Analog Input Levels Each analog input can be adjusted by +/- 12dB in 0. 5dB increments. This enables closer matching of levels among Input devices so there is less volume control disparity among Inputs. In this example, we are giving the FM TUNER (on UNBALANCED 2) a boost of +6dB to compensate for a source with low output. 1. Press ●MENU to enter the menu structure. 2. Scroll ►RIGHT to ANALOG LEVELS. 3. Press ●ENTER to access the ANALOG LEVELS me

  • 19 Volume Control Bypass The Volume Bypass option is available on all Analog Inputs. It is intended for use where an Input device’s volume control is preferred or recommended. In this example, UNBALANCED 3 will be set to VOLUME BYPASS for fixed level operation. 1. Press ●MENU to enter the menu structure. 2. Scroll ►RIGHT to navigate to VOLUME BYPASS.

  • 20 Saving and Resetting Preferences User settings are soft-saved unless the Preference Save routine to hard-save data is used. Soft-save settings are stored in a volatile memory that will be lost if mains power is turned off or fails. The Standby feature will not result in loss of soft-save settings. This includes Volume, Balance, and Input settings in addition to the

  • aurum INTEGRIS CDP, 21 Preferences Reset: PREFERENCES RESET returns settings to those previously saved by the PREFERENCES SAVE operation above. Any soft-save settings will be discarded and the last hard-save settings will be restored. RESET can be chosen by first following Steps 1-3 above to enter the PREFERENCES menu. 4. Scroll ►RIGHT to RESET. 5. Press ●ENTER to access the RESET function. 6. Press ●ENTER to CONFIRM the RESET to previously saved user settings. The Menu will automatically be exited. Restore Factory Settings: This option restores all settings t

  • aurum INTEGRIS CDP, 22 Specifications Dimensions and Weight Front panel width 483mm 19.0” Main body width 458mm 18.0” Depth 355mm 14.0” Overall Height 112mm 4.4” Net weight 13.2kg 29 lbs Shipping Weight 14.5kg 32 lbs AC Power Requirement Frequency/phase 50/60Hz single phase Voltage 100V / 120V / 230V Consumption 20 watts Input/Output Impedance Inputs: Analog unbalanced 25.0kΩ Analog balanced 48.0kΩ each phase Digital SPDIF / BNC 75Ω Digit

  • aurum INTEGRIS CDP, 23 Warranty Aurum Acoustics warrants the Integris CDP to be free of manufacturing defects in material and workmanship for a period of five years except for the transport mechanism and remote control. The warranty period for the transport mechanism and remote control is two years. Warranty coverage is effective from the date-of- purchase from an authorized Aurum Acoustics retailer. The original dated invoice is required as proof of purchase and ownership to obtain warranty servi

Related Products and Documents (CD Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Osram HIGH BAY Fitting instructions osram/high-bay-2K5.pdf 10 Mar 2023 4
2 Sony CMT-CPZ1 Operating instructions manual sony/cmt-cpz1-Q69.pdf 02 Jan 2023 36 0.48 Mb
3 COP-USA CM25H Operation & user’s manual cop-usa/cm25h-9IF.pdf 11 Jul 2023 1 0.48 Mb
4 Infineon Technologies XMC4000 Application Kit Operation & user’s manual infineon-technologies/xmc4000-application-kit-62E.pdf 25 Nov 2022 9
5 Philips Saeco Syntia HD8836 Instructions manual philips/saeco-syntia-hd8836-H27.pdf 30 Mar 2023 84
6 Carrier 30AWH004HB Service manual carrier/30awh004hb-ZCM.pdf 03 Sep 2023 138 9.92 Mb

Similar Resources:

  • Philips

    AX3312/17

    (2 pages)
    Slim and JogproofLooking for a CD player that has great features and looks ultra cool? The AX3312 is just the ticket. The players are slim and ultra modern with a unique animated optical encasing and a variety of exciting colors for a fun music experience.Stylish design• Slim Portable CD Player witn round and compact footprint• Unique animated optical c …
  • Pioneer

    DEH-P490IB - Premier Radio / CD

    (6 pages)
    Note:• When this unit is installed in a vehicle withoutACC (accessory) position on the ignition switch,red cable must be wired to the terminal that candetect the operation of the ignition key.Otherwise, battery drain may result.• Use this unit in other than the following condi-tions could result in fire or malfunction.— Vehicles with a 12-volt battery …
  • Denon

    DN-S700

    (21 pages)
    TABLE TOP SINGLE CD/MP3 PLAYERDN-S700Owner’s ManualBedienungsanleitungManuel de l’UtilisateurManuale delle istruzioniManual del usuarioGebruiksaanwijzingBruksanvisning1.DNS700EM_ENG_101.indd 1 2010/01/25 10:54:56 …
  • Monacor

    img Stage Line CD-260DJ

    (22 pages)
    BEDIENUNGSANLEITUNG • INSTRUCTION MANUAL • MODE D’EMPLOIISTRUZIONI PER L’USO • GEBRUIKSAANWIJZING • HANDLEIDINGCONSEJOS DE SEGURIDAD • SIKKERHEDSOPLYSNINGER • SÄKERHETSFÖRESKRIFTER • TURVALLISUUDESTADUAL-CD-SPIELERDUAL CD PLAYERLECTEUR CD DOUBLE LETTORE CD DOPPIOCD-260DJ Best.-Nr. 21.1770 …
  • Philips

    AZ3067

    (2 pages)
    All-in-one, impressive MP3 musicwith two-way speaker systemUncomplicated yet comprehensive, this rugged player delivers superb sound performance with quality 2-way speakers. Enjoy your favorite MP3 music(MP3-CD), CD or 30 preset FM stations on the digital tuner in enriched sound - anytime, anywherFeature-packed CD player• MP3-CD,CD-R/RW compatible• CD s …
  • Sony

    HT-7200DH

    (2 pages)
    SERVICE MANUALPublished by Sony Techno Create CorporationSony CorporationAudio Business GroupHT-7200DHDVD HOME THEATRE SYSTEM9-887-946-012008B05-1© 2008.02US ModelVer. 1.0 2008.02• HT-7200DH is composed of following models. As service manuals are issued for each component model, please refer to them.SPECIFICATIONS Power requirements 120 V AC, 60 Hz …

Comments, Questions and Opinions: