Manualios.com

Avonic CM60-IP Operation & User’s Manual

Avonic CM60-IP Manual Online:

4.3, 1374 votes
Avonic CM60-IP User Manual
Avonic CM60-IP User Guide
Avonic CM60-IP Online Manual

Text of Avonic CM60-IP User Guide:

  • www.avonic.eu 3 Menu.................................................................................................................................................................................................................................................. 21 Video ..................................................................................

  • www.avonic.eu 26 System Setting Work Mode Work Mode RTSP Reboot Click the "Reboot" button, system restart. User and password The user can modify the password (letters and numbers only) Apply / Cancel Modify password and click the "apply" button to the login page, press "cancel" button to cancel password change.

  • Avonic CM60-IP, www.avonic.eu 50 Appendix B Quick Start Step1. Please check connections are correct before starting Step2. Step3. Press the Switch ON/OFF button on the rear of the camera, the power lamp light. Step4. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be called up after initialization)

  • Avonic CM60-IP, www.avonic.eu 35 CAM_ExpComp On 8x 01 04 3E 02 FF Exposure Compensation On/Off Off 8x 01 04 3E 03 FF Reset 8x 01 04 0E 00 FF Exposure Compensation Amount Setting Up 8x 01 04 0E 02 FF Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position CAM_BackLight On 8x 01 04 33 02 FF Back Light Compensation On/Off Off 8x 01 04 33 03 FF CAM_NR(2D)Mode Auto 8x 01 04 50 02 FF ND2D Auto/Manual Manual 8x 01 04 50 03 FF CAM_NR(2D)Level - 8x 01 04 53 0p FF p: NR Setting (0: Off, level 1 to 5) CAM_NR(3D)Level - 8

  • Avonic CM60-IP, www.avonic.eu 9 Installation Connection Diagram System Select Switch Setting of the system select switch. The option of video format: VIDEO SYSTEM 0 1080p60 8 720p30 1 1080p50 9 720p25 2 1080i60 A - 3 1080i50 B - 4 720p60 C - 5 720p50 D 576i

  • Avonic CM60-IP, www.avonic.eu 40 CAM_AFSensitivityI nq 8x 09 04 58 FF y0 50 01 FF High y0 50 02 FF Normal y0 50 03 FF Low CAM_BrightnessInq 8x 09 04 A1 FF y0 50 00 00 0p 0q FF pq: Brightness Position CAM_ContrastInq 8x 09 04 A2 FF y0 50 00 00 0p 0q FF pq: Contrast Position CAM_FlipInq 8x 09 04 A4 FF y0 50 00 FF Off y0 50 01 FF Flip-H y0 50 02 FF Flip-V y0 50 03 FF Flip-HV CAM_IridixInq 8x 09 04 A7 FF y0 50 00 00 0p 0q FF pq: Iridix Position CAM_AFZone 8x 09 04 AA FF y0 50 00 FF Top y0 50 01 FF Center y0 50 02 FF Bottom CAM_ColorHueInq 8x 09 04 4F FF y0 50 00 00 00 0p FF p: Color Hue setting

  • Avonic CM60-IP, www.avonic.eu 28 Port Settings HTTP Port IP address identifies the network device, the device can run multiple web applications, each network program using network port to transmit data, so data transmission to be carried out between the port and port. Port setting is to set up WEB SERVER program using which port to transmit. When port mapping, need to be consistent with the port number(default port: 80) RTSP Port IP camera support RTSP protocol, use the VLC tools broadcast. PTZ Port Support PTZ protocol, default port: 5678. Control Protocol Setting Setting camera control communication protocol, include Visca ad

  • Avonic CM60-IP, www.avonic.eu 47 DownRight 81 01 06 01 VV WW 02 02 FF Stop 81 01 06 01 VV WW 03 03 FF AbsolutePosition 81 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF RelativePosition 81 01 06 03 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF Home 81 01 06 04 FF Reset 81 01 06 05 FF Pan_tiltLimitSet LimitSet 81 01 06 07 00 0W 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF W: 1 UpRight 0: DownLeft YYYY: Pan Limit Position ZZZZ: Tilt Position LimitClear 81 01 06 07 01 0W 07 0F 0F 0F 07 0F 0F 0F FF CAM_

  • Avonic CM60-IP, www.avonic.eu 20 Visit/Access IP Camera Input http://192.168.100.88 to web browser, a login window pop up, input login name: admin password: admin A window like the following will appear:

  • Avonic CM60-IP, www.avonic.eu 22 PTZ direction control box: Up, down, left, right, home oblique button as above Rate: Vertical speed can be chosen as 1 ~ 24, horizontal direction at the rate of 1 ~ 20. select corresponding speed and click direction button to realize PTZ speed up or speed down. Zoom In/Zoom out: for zooming in or zooming out, Focus In/ Focus Out: Focusing on distant objects or Focusing on close objects. Set/Call: When PTZ turn to expected position, can set up a number of preset that user want. click "Set" button, when PTZ turn to other position, click &quo

  • Avonic CM60-IP, www.avonic.eu 43 Call Preset 0xA0 Address 0x00 0x07 0x00 Preset ID 0xAF XOR Auto Focus 0xA0 Address 0x00 0x2B 0x00 0x01 0xAF XOR Manual Focus 0xA0 Address 0x00 0x2B 0x00 0x02 0xAF XOR Query Pan Position 0xA0 Address 0x00 0x51 0x00 0x00 0xAF XOR Query Pan Position Response 0xA0 Address 0x00 0x59 Value High Byte Value Low Byte 0xAF XOR Query Tilt Position 0xA0 Address 0x00 0x53 0x00 0x00 0xAF XOR Query Tilt Position Response 0xA0 Address 0x00 0x5B Value High Byte Value Low Byte 0xAF XOR Query Zoom Position

  • www.avonic.eu 19 Network Function Operating Environment • Operating System: Windows 2000/2003/XP/vista/7/8/10 • Network Protocol: TCP/IP Equipment Installation 1. Connect IP camera to your ethernet or to your PC directly via ethernet cable. 2. The camera can be Powered over Ethernet if the switch is PoE. The camera can also be powered by its power s

  • Avonic CM60-IP, www.avonic.eu 36 -200% SYS_Menu Off 8x 01 06 06 03 FF Turns off the menu screen Pan_tiltDrive Up 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 0x01 (low speed) to 0x18 Down 8x 01 06 01 VV WW 03 02 FF (high speed) Left 8x 01 06 01 VV WW 01 03 FF WW: Tilt speed 0x01 (low speed) to 0x14 Right 8x 01 06 01 VV WW 02 03 FF (high speed) Upleft 8x 01 06 01 VV WW 01 01 FF YYYY: Pan Position Upright 8x 01 06 01 VV WW 02 01 FF ZZZZ: Tilt Position DownLeft

  • www.avonic.eu 41 CAM_EnlargementBl ockInq 8x 09 7E 7E 03 FF y0 50 00 00 00 00 00 00 00 0p 0q rr 0s 0t 0u FF p: AF sensitivity q: bit0: Picture flip(1:On, 0:Off) rr.bit6~3: Color Gain (0h(60%) to Eh(200%)) s: Flip(0: Off, 1:Flip-H, 2:Flip-V, 3:Flip-HV) t: bit2~0: NR2D level u: Gain limit Remark: 1.[x] in the above list refer to the camera address, [y] = [

  • www.avonic.eu 25 Saturation 0~14, slider control, on the right shows the corresponding numerical. Default 3. Contrast Contrast0~14, slider control, on the right shows the corresponding numerical. Default 6. Sharpness Sharpness0~15, slider control, on the right shows the corresponding numerical. Default 1. Hue Hue 0~14, slider control, on the right shows the c

  • Avonic CM60-IP, www.avonic.eu 12 Operation OSD Menu 1. MENU Press [MENU] button to display the main menu on the normal screen, using arrow button to move the cursor to the item to be set. Press the [HOME] button to enter the corresponding sub- menu. 2. EXPOSURE Move the cursor to the Exposure item in the main menu and press [home] button, EXPOSURE menu appears, as shown in the following figure. MENU Exposure Color Image P/T/Z Noise Reduction Setup Restore Default [Home] Enter [Menu] Exit EXPOSURE Mode Auto ExpCompMode Off Backlight Off Gain Limit 3 Anti-Flicker 50Hz DR

  • Avonic CM60-IP, www.avonic.eu 30 Maintenance Camera Maintenance  If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet.  Use soft cloth or tissue to clean the camera cover.  Please use the soft dry cloth to clean the lens. If the camera is very dirty, clean it with diluted neuter detergent. Do not use any type of solvents, which may damages the surface. Unqualified Application  No shooting extreme bright object for a long period of time, such as sunlight, light sources, e

  • Avonic CM60-IP, Avonic CM60-IP / CM61-IP / CM63-IP HD Video Conferencing IP Camera with PoE User Manual Version 2.1 Update notes: • Visca over IP commands Join Avonic linkedin.com/company/avonic twitter.com/avonic1 facebook.com/avonic

  • Avonic CM60-IP, www.avonic.eu 16 7. SETUP Move the cursor to the Setup item in the main menu and press [home] button, SETUP menu appears, as shown in the following figure. Language: menu language, Optional items: EN, Chinese, Russian DVI Mode, Optional items: DVI, HDMI Protocol: Control protocol type. Optional items: AUTO, VISCA, PELCO-D, PELCO-P V_Address: Protocol address, To be decided according to the agreement, AUTO, VISCA protocol Optional items: 1 ~ 7 P_D_Address: PELCO-D protocol Optionalitems: 0 ~ 254 P_P_Address: PELCO-P protoc

  • Avonic CM60-IP, www.avonic.eu 17 Restore: Confirm restore factory settings. Optional items: Yes, No Note: Press [HOME] button to confirm, All parameter restore default, Include IR Remote address and VISICA Address Save: Save Options. Optional items: Yes, No Serial Communication Control COM port settings In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface. RS232 Communication Control: The camera can be controlled via RS232 ,the parameters of RS232C are as follows: • Baud rate: 2400/4

  • Avonic CM60-IP, www.avonic.eu 37 CAM_Contrast Direct 8x 01 04 A2 00 00 0p 0q FF pq: Contrast Position CAM_Flip Off 8x 01 04 A4 00 FF Flip-H 8x 01 04 A4 01 FF Flip-V 8x 01 04 A4 02 FF Flip-HV 8x 01 04 A4 03 FF Single Command For Video Flip CAM_SettingSave Save 8x 01 04 A5 10 FF Save Current Setting CAM_Iridix Direct 8x 01 04 A7 00 00 0p 0q FF pq: Iridix Position CAM_AWBSensitivit y High 8x 01 04 A9 00 FF High Normal 8x 01 04 A9 01 FF Normal Low 8x 01 04 A9 02 FF Low CAM_AFZone Top 8x 01 04 AA 00 FF AF Zone weig

  • Avonic CM60-IP, www.avonic.eu 13 Mode: Exposure mode. Optional items: Auto,Manual, SAE, AAE, Bright ExpCompMode: Exposure compensation mode, Optional items: On, Off (Effective only in Auto mode) ExpComp: Exposure compensation value, Optional items: -7 ~ 7(Effective only in ExpComp Mode item to On) Backlight: Set the backlight compensation, Optional items: On, Off (Effective only in Auto mode ) Gain Limit: Maximum gain limit. Optional items: 0 ~ 15 (Effective only in Auto, AAE ,Bright mode) DRC: DRC strength, Optional items: 0 ~ 8. Bright: Intensity control, Optional items:00~17. (Effective only in Bright mode) Anti-Flicker

  • Avonic CM60-IP, www.avonic.eu 21 TCP/UDP Control The Avonic IP camera is implemented with a TCP server inside. The default TCP port number is 5678. This number can be changed in the WebGUI in the Network Menu. Once the connection between client and server is set up, the client will be able to send VISCA PTZ commands to the server. The server then parses and executes the VISCA PTZ command. The Avonic IP Camera has also implemented an UDP server inside. The UDP port number is 1259. This number cannot be changed. Once the connection between client and server is set up, the client will be able to send VISCA PTZ commands to t

  • Avonic CM60-IP, www.avonic.eu 23 Video 720p120 : On, Off Video Format : 50HZ(PAL) 60HZ(NTSC) Dial priority Encode Protocol : H.264 H.265 MJPEG Encode Level : baseline, mainprofile, highprofile Resolution

  • Avonic CM60-IP, www.avonic.eu 7 IR Remote Controller 1. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power consumption in standby mode is approximately half of the normal mode) 2. Position Buttons To set preset or call preset 3. *Button Used with other buttons 4. Set/Preset Buttons Set preset: Store a preset position [SET PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position 5. Pan-Tilt control Buttons Pressing the Pan-Tilt back to the middle position 6. Back buttons Press the OSD

  • www.avonic.eu 46 CAM_ExpComp On 81 01 04 3E 02 FF Exposure Compensation On/Off Off 81 01 04 3E 03 FF Reset 81 01 04 0E 00 FF Exposure Compensation Amount Setting Up 81 01 04 0E 02 FF Down 81 01 04 0E 03 FF Direct 81 01 04 4E 00 00 0p 0q FF pq: ExpComp Position CAM_BackLight On 81 01 04 33 02 FF Back Light Compensation On/Off

  • Avonic CM60-IP, www.avonic.eu 6 Main Unit Input and Output Description 1. Audio LINE IN Interface 2. CVBS Interface 3. System select switch 4. RS485 interface 5. RS232 IN interface 6. RS232 OUT interface 7. Network Interface 8. HDMI Interface 9. SDI Interface 10. USB2.0 (update only) 11. DC 12V jack 12. Power switch

  • Avonic CM60-IP, www.avonic.eu 39 CAM_VersionInq 8x 09 00 02 FF y0 50 ab cd mn pq rs tu vw FF ab: Factory Code cd: Hardware Version mnpq: ARM Version rstu: FPGA Version vw: Camera model 01: C Type 02: M Type 03: S Type VideoSystemInq 8x 09 06 23 FF y0 50 00 FF 1920x1080i60 y0 50 01 FF 1920x1080p30 y0 50 02 FF 1280x720p60 y0 50 04 FF NTSC y0 50 05 FF NTSC y0 50 06 FF NTSC y0 50 07 FF 1920x1080p60 y0 50 08 FF 1920x1080i50 y0 50 09 FF 1920x1080p25 y0 50 0A FF 1280x720p50 y0 50 0C FF PAL y0 50 0D FF PAL y0 50 0E FF PAL IR_Receive 8x 09 06 08 FF y0 50 02 FF On y0 50 03 FF

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Saitek Pro Flight Instrument Panel Operation & user’s manual saitek/pro-flight-instrument-panel-R8L.pdf 16 Oct 2023 23 0.4 Mb
2 Lascar EL-WiFi-TP Quick start manual lascar/el-wifi-tp-27B.pdf 09 Sep 2023 2
3 LG FB164 Operation & user’s manual lg/fb164-39E.pdf 26 Jun 2023 22
4 Sony MSAC-US5 Operating instructions manual sony/msac-us5-8LH.pdf 28 Nov 2022 48 0.24 Mb
5 Artesyn SharpMedia PCIE-8120 Quick start manual artesyn/sharpmedia-pcie-8120-CUQ.pdf 04 Sep 2023 2
6 JVC KD-AR360 Instructions manual jvc/kd-ar360-67L.pdf 14 Mar 2024 98

Similar Resources:

  • Moxa Technologies

    VPort P06-2L25M

    (12 pages)
    P/N: 1802000062010 *1802000062010* VPort 06-2 Series Quick Installation Guide MOXA IP Camera Edition 1.1, December 2015 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5 …
  • ACTi

    D71

    (24 pages)
    www.acti.comEncoder Firmware V4.06.09 User’s Manual 1 4” Outdoor Dome Series Hardware Manual D71, D72, D81, D82, E71, E72, E73, E74, E81, E82, E83, E84, E85, E86, E87 2013/06/20 …
  • Zxtech

    Tropox

    (23 pages)
    IP Camera User ManualStatementIf the user manual cannot help you to solve the problem, please call our technologycenter about the solutions. We will update the content for the new functions withoutnotice.Notice1. Installation EnvironmentKeep away from the places for high-temperature, heat source and direct sunlight; Keep away from water. When get wet, …
  • Huawei

    IPE Series

    (92 pages)
    IPE V100R001C03SPC200 Installation Guide Issue 03 Date 2013-02-28 HUAWEI TECHNOLOGIES CO., LTD …
  • Lumens

    VC-A61P

    (48 pages)
    To download the latest version of Quick Start Guide, multilingual user manual, software, or driver, etc., please visit Lumens https://www.MyLumens.com/support VC-A61P / VC-A61PN HD camera (PTZ Video Camera) User Manual - English [Important] …
  • i3 International

    Ax49

    (32 pages)
    Ax49, Ax50, Ax51-seriesUser GuideBefore attempting to connect or operate this product, read these instructions carefully.Save this manual for future use. CONTENTS1. Warnings and operation notes..........................................32. Product Overview ............................................................43. Unpacking............................. …

Comments, Questions and Opinions: