Fisher & Paykel EB60 Operation & User’s Manual

Text of Fisher & Paykel EB60 User Guide:

• Fisher & Paykel EB60, 16 MENU SETTINGS 5 INSERT GROUNDS CONTAINER AND DRIP TRAY: insert the drip tray complete with grounds container. 6 PLACE 2L CONTAINER UNDER SPOUTS, PRESS OK TO START: position a container under the coffee spouts and hot water spout. Press . 7 RINSING UNDERWAY, PLEASE WAIT: the appliance performs a rinse cycle from the coffee spouts. Do not leave the appliance unattended while hot water is being delivered. 8 EMPTY WATER TANK: extract the tank and empty it completely, then press. 9 (If the filter is installed) REMOVE WATER SOFTENER FILTER: remove the filter from the tank. Press NEXT. !0 INSERT WATER TANK, PR

• Fisher & Paykel EB60, 31 CLEANING Cleaning the infuser The infuser must be cleaned at least once a month. IMPORTANT! The infuser must not be removed when the appliance is on. Do not use force to remove the infuser. 1 Make sure the machine is correctly turned off (see Turning off). 2 Open the service door. 3 Remove the drip tray and waste coffee container. 4 Press the two coloured release buttons inwards and at the same time pull the infuser outwards. IMPORTANT! Do not use dishwashing liquid to clean the infuser as it will remove the lubricant inside the piston. 5 Soak the infuser in wat

• Fisher & Paykel EB60, 42 DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO PRESS OK TO START CLEANING PROCESS OR TURN MILK FROTH ADJUSTMENT DIAL The milk container has been inserted with the froth adjustment dial in the CLEAN position. To proceed with the CLEAN function, press or turn the froth adjustment dial to one of the milk positions. TURN DIAL TO <CLEAN> POSITION TO START CLEANING Milk has been delivered recently and the tubes inside the milk container must be cleaned. Turn the froth adjustment dial to CLEAN. TURN THE MILK FRO

• Fisher & Paykel EB60, 35 IMPORTANT! Hot water containing chemicals flows out of the spout. Take care to avoid contact with splashes of this solution. 8 Press to confirm that you have added the descaling solution. DESCALING UNDERWAY, PLEASE WAIT appears on the display. The descale programme starts and the descaler liquid comes out of the steam and coffee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coffee maker. After about 25 minutes, descaling stops: 9 RINSE AND FILL WATER TANK UP TO MAX LEVEL: the appliance is now r

• Fisher & Paykel EB60, 14 MENU SETTINGS Set time To adjust the time on the display: 1 Press . 2 Press or until SET TIME appears on the display. 3 Press . The time setting panel will appear on the display. 4 Set the current time by pressing or . 5 To confirm, press (to cancel, press BACK), then press BACK to go back to the home screen. Auto-start You can set the auto-start time in order to have the appliance ready at a certain time (eg in the morning) so that the appliance is ready to make coffee immediately. Note: to enable this function, the time must already be set correctly. To enable auto-start:

• Fisher & Paykel EB60, 4 IMPORTANT SAFETY INSTRUCTIONS Your safety is important to us. Keep the following instructions in mind when you are using your coffee maker. IMPORTANT! Failure to observe warnings could result in: ● Possibly life threatening injury from electric shock. ● Injury or scalds and burns. ● Damage to the appliance. WARNING! When using your coffee maker, follow basic precautions, including the following: ● Read all instructions before using the coffee maker. ● The information in this manual must be followed to minimise the risk of fire, explosion, or to prevent property damage, personal injury or loss of life. ● Use the coffee maker only for it

• 22 MAKING CAPPUCCINOS AND MILK-BASED COFFEES Adjusting the amount of froth Turn the froth adjustment dial on the milk container lid to adjust the amount of froth delivered while making milk-based coffees. Follow the recommendations in the table below: DIAL POSITION FROTH RECOMMENDED FOR None Latte / Hot milk Minimum Latte or Macchiato Maximum Cappuccino Making cappuccinos and mi

• Fisher & Paykel EB60, 8 SAFETY AND WARNINGS Operational ● Customise the water hardness as soon as possible following the instructions in the ‘Water hardness’ section. ● Keep hands clear of the coffee spout when in operation. The temperature of liquid that flows from the spout could result in burns. ● During the rinse cycle hot water flows from the spout. Please keep hands clear of the spout to avoid the risk of burns. ● This appliance produces hot water and steam may form while it is in operation. ● Models with glass surfaces: do not use the appliance if the surface is cracked. ● Do not use the appliance when it is out the cabinet. Make sure the

• Fisher & Paykel EB60, 9 FIRST USE Checking the appliance After removing the packaging, make sure the product is complete. If the appliance is damaged, contact customer support. Note: that coffee has been used to factory test the appliance, so it is possible that there may be traces of coffee in the mill. ● You should customise water hardness as soon as possible following the instructions in section ‘Setting water hardness’. 1 Connect the appliance to the mains electricity supply. 2 Make sure the main switch on the side of the appliance is pressed down. 3 To select l

• Fisher & Paykel EB60, 7 SAFETY AND WARNINGS ● Do not rest containers with liquids or inflammable or corrosive materials on top of the appliance. ● Do not rest large objects which could obstruct movement or unstable objects on the appliance. ● Never turn off the machine during descaling. ● The first time you use the appliance, or if it is not used for more than three or four days, rinse all removable accessories which may come into contact with water or milk with hot water. ● If the appliance is not used for more than three or four days,

• 3 Power cord Power plug Measure compartment Main switch Water tank ACCESSORIES Connection nozzle cover Cleaning brush Frothed milk spout (adjustable) Milk intake tube Milk container Thermal casing Lid with milk frother Froth adjustment and clean dial Lid release buttons ‘Total Hardness Test’ indicator paper Water softener filter (some models only)

• Fisher & Paykel EB60, 11 FIRST USE Note: ● Before turning the appliance on, make sure the main switch is pressed. ● Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. ● The appliance is ready for use only after completion of this cycle. 1 To turn the appliance on, press . The message HEATING UP UNDERWAY PLEASE WAIT will appear on the display. 2 When heating is complete, the message changes to: RINSING UNDERWAY, HOT WATER FROM SPOUTS. As well as heating the boiler, this also heats the internal circuits by circulating hot water. 3 The appliance is ready to use when the home screen appears on the di

• Fisher & Paykel EB60, 25 STEAM DELIVERY IMPORTANT! ● Do not leave the appliance unattended while steam is being delivered. ● Always stop steam delivery before extracting the container filled with liquid to avoid burns from splashes. 1 Make sure the steam wand is attached correctly to the hot water/steam connection nozzle. 2 Fill a container with water to be heated or milk to be frothed and immerse the spout in the liquid. 3 Select STEAM from the display. After a few seconds, steam to heat the liquid is delivered from the steam wand. 4 When the desired temperature or level of froth is reached, end steam delivery by pressing CANCEL. Note: If ‘Energy saving’ is enabled, you may have to wait a f

• Fisher & Paykel EB60, 17 MAKING COFFEE Selecting the strength of coffee Select the required strength by pressing STRENGTH : STRENGTH Very Light Light Medium Strong Extra Strong Customised strength – if programmed Pre-ground coffee After delivering the drink, the strength setting is reset to the value. Selecting the coffee size Select the required size of coffee delivered by pressing SIZE from the display. SIZE Small Medium Large Extra Large Customised size – if programmed After delivering the drink, the size setting

• Fisher & Paykel EB60, 1 CONTENTS IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer. Registration Register your product with us so we can provide you with the best service possible. To register your product visit our website: fisherpaykel.com Appliance parts

• Fisher & Paykel EB60, 12 FIRST USE Measuring and setting water hardness How frequently the appliance alerts you that a descale is required, is determined by the level of water hardness. The appliance has a default water hardness setting of 4. However, to ensure the continued high performance of your coffee maker, it is important to measure the water hardness before the first use. Measuring water hardness 1 Remove the ‘total hardness test’ indicator paper from its pack. 2 Immerse the paper completely in a glass of water for one second. 3 Remove the paper and shake lightly. After about a minute, a number of red squares form, which

• 39 DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO FILL TANK WITH FRESH WATER Insufficient water in the tank. Fill the tank with water and ensure that it is inserted correctly, pushing it as far as it will go until it clicks into place. INSERT WATER TANK The tank is not correctly in place. Insert the tank correctly and press as far as it will go. EMPTY GROUNDS CONT

• Fisher & Paykel EB60, 27 MEMORISING YOUR PERSONAL PROFILE The appliance allows you to memorise six different profiles, each associated with a different icon. The customised MY beverages strength and size values are saved in each profile (see section ‘Customising the beverages ’). The order in which all the beverages are displayed is based on the frequency of selection. To select or enter a profile, press on the profile currently in use , press or until the required profile is displayed, then press on the profile.

• Fisher & Paykel EB60, 40 DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO ADD COFFEE, COFFEE MAX. 1 MEASURE A long coffee with pre-ground coffee has been requested. Place pre-ground coffee in the funnel and press to continue and complete delivery. FILL BEANS CONTAINER The coffee beans have run out. Fill the beans container. GROUND TOO FINE. ADJUST MILL 1 CLICK WHILE IN OPERATION The grinding is too fine and the coffee is delivered too slowly or not at all. Repeat coffee delivery and turn the grinding adjustment dial one click clockwise towards ‘7’ while the coffee mill is in operation. If after making at least two coffees, delivery is still too s

More Instructions:

	Fisher & Paykel EB60 Installation manual 03-10-2022 28	DOWNLOAD
	Fisher & Paykel EB60 Installation instructions 18-08-2023 3	DOWNLOAD

Related Products and Documents (Coffee Maker):

Comparable Devices:

Similar Resources:

• WMF 5 (130 pages) Bedienungsanleitung User Manual Mode d’emploi GebruiksaanwijzingWMF 5bitte aufklappen please open up veuillez déplier Uitklappen a.u.b.IB -0 0 05 00 01 -0 2-1111WMF Nederland B.V. Gyroscoopweg 82/84 NL - 1042 AX Amsterdam Email: [email protected] www.wmf.nl Tel.: 0031-20-4 80 80-80 Fax: 0031-20-4 80 80-70WMF Belgium N.V. Brussels Trade Mart Dakar 101 B.P. 673 B …

• Philips HD3002/00 (2 pages) www.philips.combyCoffee maker HD3002uIntroductionIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIDear customer, congratulations on acquiring your new Glass by Philips coffee maker.Your new Glass by Philips cof …

• Curtis G4 TP2S (16 pages) 1This Curtis Generation 4 Unit is Factory Pre-Set and Ready to Go Right from the Box.Following are the Factory Settings for your G4 Coffee Brewing System: • Brew Temperature = 200°F • Water Bypass = On for LARGE & MEDIUM Brew Only • Brew Volume = Set to Vessel Requirement.System Requirements: • Water Source 20 – 90 PSI (Minimum Flow Ra …

• Krups XP9000 (18 pages) E S P R E S S E R I A A U T O M AT I C X P 9 0 0 0 APPLIANCE READYSELECT BEVERAGEOperating instructionsFor household use onlyCheck warranty card for details of warranty in your country with a maximum of 5,000 cycles per year. This product is for domestic use only and is not suitable for trade or professional purposes. Any non-household use is not …

• illy X1 (136 pages) X1 INSTRUCTION MANUAL  X1 MANUALE DI ISTRUZIONIX1 MANUEL D’UTILISATION - X1 BEDIENUNGSANLEITUNGX1 MANUAL DE INSTRUCCIONES - X1 MANUAL DE INSTRUÇÕESX1 HANDLEIDING - X1 BRUGSANVISNINGX1 ΕΓΧΕΙΡΙΙΟ ΟΗΓΙΝ ΧΡΗΣΗΣ - X1   X1 사용 설명서사용 설명서 …

• Miele Built-in coffee machine (84 pages) Operating and installation instructionsBuilt-in coffee machineTo avoid the risk of accidents or damage to the appliance. it is essentialto read these instructions before it is installed and used for the first time.M.-Nr. 09 549 651en - AU, NZ …

Comments, Questions and Opinions: