Manualios.com

Cisco MDS 9500 Series Configuration Manual

Cisco MDS 9500 Series Manual Online:

3.75, 1760 votes
Cisco MDS 9500 Series User Manual
Cisco MDS 9500 Series User Guide
Cisco MDS 9500 Series Online Manual

Text of Cisco MDS 9500 Series User Guide:

  • Cisco MDS 9500 Series, CHAPTER Send documentation comments to [email protected] 2-1 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 2 Initial Switch Configuration This chapter provides instructions for setting up the hardware, connecting to the console port, and initially configuring the switch. This chapter includes the following sections: • Preparing for Network Connections, page 2-1 • Connecting the Console Port, page 2-2 • Connecting the 10/100 Ethernet Management Port, page 2-4 • Connecting to the MGMT 10/100/1000 Ethernet Port, page 2-5 • Using the Switch Setup Util

  • Send documentation comments to [email protected] 2-2 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Connecting the Console Port Connecting the Console Port This section describes how to connect the RS-232 console port to a PC. The console port allows you to perform the following functions: • Con

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-3 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Connecting the Console Port Figure 2-3 Connecting the Console Cable to a Cisco MDS 9200 Series Switch Figure 2-4 Connecting the Console Cable to a Cisco MDS 9100 Series Switch S T A T U S S Y S T E M R E S E T CONSOLE MGMT 10/100 MDS 9216i 1 2 140571 COM1 1 Console port 2 MGMT 10/100 Ethernet port (with integrated link and activity LEDs) 140572 1 2 1 Console port 2 MGMT 10/100 Ethernet port

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-4 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Connecting the 10/100 Ethernet Management Port Connecting the Console Port to a PC You can connect the console port to a PC serial port for local administrative access to the Andiamo 9500 switch. Note The PC must support VT100 terminal emulation. The terminal emulation software—frequently a PC application such as HyperTerminal Plus—makes communication between the Andiamo 9500 switch and your PC possible during setup and configuration. To connect the console port to a PC, follow t

  • Send documentation comments to [email protected] 2-5 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Connecting to the MGMT 10/100/1000 Ethernet Port Make sure to connect the Ethernet management ports of both supervisor modules on an MDS 9500 Series switch. Even though there are two Ethernet connections, only one management IP ad

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-6 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Using the Switch Setup Utility General Software Firmbase[r] SMM Kernel 1.1.1002 Aug 6 2003 22:19:14 Copyright (C) 2002 General Software, Inc. Firmbase initialized. 00000589K Low Memory Passed 01042304K Ext Memory Passed Wait..... General Software Pentium III Embedded BIOS 2000 (tm) Revision 1.1.(0) (C) 2002 General Software, Inc.ware, Inc. Pentium III-1.1-6E69-AA6E +-------------------------------------------------------

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-7 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Using the Switch Setup Utility *Note: setup is mainly used for configuring the system initially, when no configuration is present. So setup always assumes system defaults and not the current system configuration values. Press Enter at anytime to skip a dialog. Use ctrl-c at anytime to skip the remaining dialogs. Would you like to enter the basic configuration dialog (yes/no): yes The switch setup utility guides you through the basic configuration process. Press Ctrl-C at any prompt to end the configuration pr

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-8 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Using the Switch Setup Utility Configure the ntp server? (yes/no) [n]: no Step 16 Enter noshut (shut is the default) to configure the default switch port interface to the noshut state. Configure default switchport interface state (shut/noshut) [shut]: noshut Step 17 Enter on (on is the default) to configure the switch port trunk mode. Configure default switchport trunk mode (on/off/auto) [on]: on Step 18 Enter deny (deny is the default) to configure a default zone policy co

  • Cisco MDS 9500 Series, Send documentation comments to [email protected] 2-9 Cisco MDS 9000 Family Quick Configuration Guide OL-8251-01 Chapter 2 Initial Switch Configuration Verifying the Module Status Verifying the Module Status Before you proceed with any further configuration of the switch, you need to ensure that the modules in the chassis are functioning as designed. To verify the status of a module at any time, issue the show module command. All the hardware that was physically installed should be displayed. A sample output of the show module command follows: switch# show module Mod Ports Module-Type

Related Products and Documents (Switch):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic KX-TG8100E Operating instructions manual panasonic/kx-tg8100e-5TJ.pdf 11 Jul 2022 52 3.74 Mb
2 DigiDesign FWx FireWire Manual  digidesign/fwx-firewire-H35.pdf 29 Apr 2023 18 4.51 Mb
3 Graco Blossom Owner's manual graco/blossom-TY2.pdf 18 Sep 2023 36 3.96 Mb
4 MK Sound SW-50 Operation manual mk-sound/sw-50-DR7.pdf 25 Oct 2022 12
5 Mitsubishi Electric Untitle LDT37Iv Operation & user’s manual mitsubishi-electric/untitle-ldt37iv-LZX.pdf 30 Jan 2024 37
6 Telex US-2000 Operating instructions manual telex/us-2000-TRW.pdf 25 Jan 2023 22 0.08 Mb

Similar Resources:

  • Nortel

    Passport 8006

    (4 pages)
    •Combines the port density andconnectivity of the Passport 8600modular switch with award-winning Alteon Web Switching technology• Provides Local and Global ServerLoad Balancing and healthchecks, to optimize existingserver infrastructure andminimize costs• Enables Firewall and VPN LoadBalancing, which can run simul-taneously with server loadbalancing, f …
  • StarTech.com

    SV231MDPU2

    (11 pages)
    Manual Revision: 01/21/2016For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startech.comIT: Guida per l'uso - it.startech.comNL: Gebruiksaanwijzing - nl.startech.comPT: Guia do usuário - pt.startech.comSV231MDPU22 Port …
  • 3Com

    SuperStack 3 3C16440A

    (8 pages)
    The SuperStack®3 Baseline Hub is a flexible unmanaged Ethernetrepeater which is very easy to use. It can be used in a variety of ways,from building a small network to expanding a larger, more establishednetwork.The SuperStack 3 Baseline Hub 12-port TP (3C16440A) has 12 dedicatedshielded twisted pair (TP) ports on the front panel. The SuperStack 3Baseline Hu …
  • ALTENBURGER ELECTRONIC

    AQStation Switch

    (8 pages)
    Altenburger Electronic GmbH Manual AQStation Switch V1.0 - 17.07.2015 Page 1/8 AQStation Switch Typ: AQS Switch black Order-No.: 90.00.000 Typ: AQS Switch white Order-No.: 90.00.001 LAN/Wi-Fi-based-control Manual …
  • Mobalpa

    IDML

    (2 pages)
    NOT_0000184_02 1 / 2Interrupteur à détecteur de mouvement pour spot LED standard / Movement detector switch for standard spot LEDInstructions de montageMounting instructionsRéférences / ReferencesIDMLCBC_IDMLNécessaire / Necessaryx 110 min …
  • Rose electronics

    QuadraVista

    (60 pages)
    QuadraVista™ QUAD VIDEO KVM SWITCH 10707 Stancliff Road Phone (281) 933-7673 Houston, Texas 77099 www.rose.com INSTALLATION AND OPERATIONS MANUAL …

Comments, Questions and Opinions: