Manualios.com

Cisco Nexus 4005I Getting Started Manual

Cisco Nexus 4005I Manual Online:

4.65, 2190 votes
Cisco Nexus 4005I User Manual
Cisco Nexus 4005I User Guide
Cisco Nexus 4005I Online Manual

Text of Cisco Nexus 4005I User Guide:

  • Cisco Nexus 4005I, Send feedback to [email protected] Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide This document includes the following sections: • Overview, page 1 • Safety Warnings, page 2 • Verifying your Shipping Contents, page 2 • Connecting Devices, page 3 • Configuring the Switch, page 4 • Managing the Switch, page 9 • Related Documentation, page 10 • Obtaining Documentation and Submitting a Service Request, page 10 Overview This guide provides instructions on how to install, co

  • Send feedback to [email protected] 2 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Safety Warnings Safety Warnings This section contains important safety information you should know before working with the switch module. Use the guidelines in this section to ensure your own personal safety and t

  • Send feedback to [email protected] 3 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Connecting Devices • Cisco Console Cable RJ-45-to-DB9 (Part Number 72-1259-01), as shown in Figure 1 • Product Documentation CD Figure 1 Cisco Console Cable RJ-45-to-DB9 If you purchased the Option Kit for the switc

  • Cisco Nexus 4005I, Send feedback to [email protected] 4 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Configuring the Switch For simplified cabling, the automatic medium-dependent interface crossover (auto-MDIX) feature is enabled by default on the External Management Port. With auto-MDIX enabled, the port detects the required cable type for copper Ethernet connections and configures the interface accordingly. Therefore, you can use either a crossover or a straight-through cable for connections to the External Management Port, regardless of the type of device on the other end of the connection. For more information about enabling or disabli

  • Cisco Nexus 4005I, Send feedback to [email protected] 5 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Configuring the Switch Figure 2 AMM I/O Module Admin/Power/Restart Window Step 5 From the External ports drop-down list, choose Enabled to enable external ports on the switch module. Step 6 Click Save to save your settings. Step 7 In the left pane, expand I/O Module Tasks, and click Configuration. Step 8 In the I/O Module Power/Restart area, check the check box for the bay that correspo

  • Cisco Nexus 4005I, Send feedback to [email protected] 6 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Configuring the Switch Figure 3 AMM I/O Module Configuration Window Step 9 In the New Static IP Configuration area, enter the new IP address, the Subnet mask, and the Gateway address. Click Save. Note The Save button is located in the lower, right portion of the window. Step 10 Click the Advanced Configuration link. Take the following actions for switch module features: a. Enable external management for all ports. b. Preser

  • Cisco Nexus 4005I, Send feedback to [email protected] 7 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Configuring the Switch Note Register the switch module device immediately with your supplier. Failure to register may affect response times for the initial service call. The device must be registered to receive entitled support services. Step 3 Enter the basic configuration information. The following example shows how to start the basic configuration setup: n4k-8# setup

  • Cisco Nexus 4005I, Send feedback to [email protected] 8 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Configuring the Switch IPv4 address of the default gateway: < IP address > Step 10 Enable the Telnet service by entering yes (or y), as in the following example: Enable the telnet service? (yes/no) [y]: y Step 11 Enable the SSH service by entering yes (or y), as in the following example (the default is no): Enable the ssh service? (yes/no) [n]:n Step 12 Configure the NTP server by entering yes (or y), as in the following example (the d

  • Cisco Nexus 4005I, Send feedback to [email protected] 9 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Managing the Switch Managing the Switch After you complete the initial switch module configuration, use the AMM, the CLI, or other management options (if available) for further configuration. This section describes the following topics: • Blade Enclosure Advanced Management Module, page 9 • Command-Line Interface, page 9 • Other Management Options, page 9 Blade Enclosure Advanced Management Module For standalone switch module units, you can use the AMM to configure and manage the switch module. See the IBM BladeCenter Advanced Ma

  • Cisco Nexus 4005I, Send feedback to [email protected] 10 Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Getting Started Guide OL-19952-02 Related Documentation Related Documentation For more information about the switch module, see the following documents on http://www.cisco.com: • Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Hardware Installation Guide • Regulatory Compliance and Safety Information for the Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter • Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter NX-

More Instructions:

DOWNLOAD

Related Products and Documents (Switch):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Pico Communications E-15 Technical reference pico-communications/e-15-771.pdf 12 Sep 2022 46
2 Dialogic Media Board VFX/41JCT-LS Quick installation manual dialogic/media-board-vfx-41jct-ls-I36.pdf 23 Dec 2022 2 0.15 Mb
3 DigiTech VOCALIST LIVE 3 Owner's manual digitech/vocalist-live-3-Z4B.pdf 10 Jul 2022 32 4.15 Mb
4 Eddy Wireless EDW-30T Operation & user’s manual eddy-wireless/edw-30t-62E.pdf 05 Jan 2024 48
5 Sony SRS-Z750PC Operating instructions sony/srs-z750pc-4BG.pdf 23 Sep 2023 2 0.12 Mb
6 Cembre B15 Operation and maintenance manual cembre/b15-231.pdf 17 Oct 2023 18

Similar Resources:

  • National Instruments

    NI-SWITCH

    (34 pages)
    Artisan Technology Group is your source for quality new and certied-used/pre-owned equipment• FAST SHIPPING AND DELIVERY• TENS OF THOUSANDS OF IN-STOCK ITEMS• EQUIPMENT DEMOS• HUNDREDS OF MANUFACTURERS SUPPORTED• LEASING/MONTHLY RENTALS• ITAR CERTIFIED SECURE ASSET SOLUTIONSSERVICE CENTER REPAIRSExperienced engineers and techni …
  • ANTAIRA

    LMP-0602 V2 Series

    (24 pages)
    LMP-0602-XX-V2 Series6-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with4*10/100Tx (30W/Port) and 2*10/100Fx Multi-Mode/Single Mode;Version 2 Hardware Hardware ManualVersion 2.0(September 2020)  …
  • Sapido

    HG-3105

    (2 pages)
    5/8 Port GIGABIT Switch *1Power Adapter*1Quick Installation Guide*1Power LED:LED is on means the switch is power on.Ethernet Speed/ Link/Act LED: 1.The solid LED means well connection, and the flash LED represents data transmitting. 2.The meanings of LED color -Orange On:1000Mbps Gigabit connected -Orange Flash: 1000Mbps Gigabit connection activity …
  • Hirschmann

    BATOne

    (52 pages)
    User Manual Installation Managed IP67 Wireless Switch BATOne Installation BATOne Release 01 01/2019 Technical Support https://hirschmann-support.belden.com …
  • Intellinet

    561754

    (2 pages)
    PowerUse the included power adapter to connect the DC/5V jack (A) to an AC outlet. Confirm that the Power LED (B) lights. NOTE: To ensure proper operation, use only the included power adapter.PortsAll ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and uplink ports are not needed for connections to PCs, routers, other switches, …
  • NETGEAR

    JGSM7224

    (2 pages)
    Installation GuideProSafe 24-Port Gigabit Managed Switch JGSM7224Package Contents• ProSafe® 24-Port Gigabit Managed Switch JGSM7224 • Rubber footpads for tabletop installation• Power cord• Console cable• Rack-mount kit for installing the switch in a 19-inch rack• Installation guide• Resource CD that includes the JGSM7224 Hardware Installation …

Comments, Questions and Opinions: