Cobalt Digital Inc 9902-2UDX Product Manual

Text of Cobalt Digital Inc 9902-2UDX User Guide:

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-65 Operating Instructions 9902-2UDX Function Menu List and Descriptions Provides three general-purpose timers that can be triggered to start, pause, reset, or stop upon event actions. The state of each timer, in turn, can also be used to invoke other actions. Email Alerts Provides setup for automated Email alerts when an event has occurred. Email Alerts Table 3-2 9902-2UDX Function Menu List — continued Event Timers 1 thru 3 (Timer 1 shown) can be set with count-down values. The Pause/ Reset/Start control here are manual controls. The timers are typically used with automated

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-49 Operating Instructions 9902-2UDX Function Menu List and Descriptions AFD/WSS/VI sub-tab provides prioritized and gated input monitoring for AFD, WSS and/or VI formats. Also provides translation between input and output AFD, WSS, and VI ARC formats. Note: • Line number control available only for AFD format. WSS and VI use fixed line numbers per applicable standards. • Some AFD codes are not supported in WSS and VI formats. Refer to AFD/WSS/VI Translation Matrix on page 3-51 for more information. • Input Format Status Displays Displays the current status and contents of the th

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-69 Operating Instructions 9902-2UDX Function Menu List and Descriptions Alarms Setup Controls Provides controls for setting up controls which screen for and propagate input program video alarms for video, audio, and ancillary data defect conditions. Conditions and alarm status can be propagated as DashBoard tree-view frame alarms, downloadable .txt files and/or Syslog IP-based alarms. Table 3-2 9902-2UDX Function Menu List — continued The Alarms tab has several sub-tabs which allow setting up detec

• Cobalt Digital Inc 9902-2UDX, 2 Installing a Rear I/O Module 2-8 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) RM20-9902-2UDX-K Provides the following connections: • Four 3G/HD/SD-SDI video inputs (SDI IN A thru SDI IN D; IN D-to-OUT 1 as passive RLY bypass) • SIx AES audio inputs (AES IN 1 thru AES IN 6) • Two analog balanced audio inputs (AN-AUD IN 1 and AN-AUD IN 2) • Four 3G/HD/SD-SDI video outputs (SDI OUT 1 thru SDI OUT 4) • Four AES audio outputs (AES OUT 1 thru AES OUT 4) • COMM/GPIO RJ-45 connector Note: • Refer to GPIO, Serial (COMM), and Analog Audio Connections (p. 2-11) for connector pinouts and important information regarding GPO electrical limits. • Available equipped with High-De

• 3 9902-2UDX Function Menu List and Descriptions 3-30 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) (continued) • Black Hard Clip Applies black hard clip (limiting) at specified percentage. (-6.8% to 50.0%; null = -6.8%) • White Hard Clip Applies white hard clip (limiting) at specified percentage. (50.0% to 109.1%; null = 109.1%) • White Soft Clip Applies white soft clip (limitin

• 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-9 Operating Instructions Ancillary Data Line Number Locations and Ranges Ancillary Data Line Number Locations and Ranges Table 3-1 lists typical default output video VANC line number locations for various ancillary data items that may be passed or handled by the card. Because line number allocation is not standardized for al

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-25 Operating Instructions 9902-2UDX Function Menu List and Descriptions (Option +QC only) Sets quality check screening and thresholds for video quality event alerts. When a quality events occur, the event(s) can be used by the Presets function to invoke input routing or other changes. Note: Input B thru Input D have controls identical to the controls described here for Input A sub-tab. Therefore, only the Input A controls are shown here. Set controls for other inputs using the respective sub-tab. • Event Status Indic

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-67 Operating Instructions 9902-2UDX Function Menu List and Descriptions (continued) • Firmware Upgrade Controls Firmware upgrade controls allow a selected firmware version (where multiple versions can be uploaded to the card internal memory) to invoke an upgrade to a selected version either instantly, or set to install on the next card reboot (thereby allowing card upgrade downtime to be controlled at a scheduled point in time). Note: The page/tab here allows managing multiple firmware versions saved on the card. New upgrade firmware from our web site can always be directly uploaded to the card without

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-81 Operating Instructions Troubleshooting Figure 3-11 MMC Boot Button 3. With button now released, the card will begin reprogramming: • COM LED illuminates and remains illuminated. • When reprogram is complete, COM LED turns off, on, and then off again (entire process takes about 1-1/2 minute). 4. Remove power from the card (remove card from slot or power-down BBG-1000 Series unit). 5. Re-apply power to the card. The card/device will display as “UNLICENSED” in DashBoard/remote control. 6. I

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 1-3 Introduction Manual Conventions Manual Conventions In this manual, display messages and connectors are shown using the exact name shown on the 9902-2UDX itself. Examples are provided below. • Card-edge display messages are shown like this: • Connector names are shown like this: SDI IN A In this manual, the terms below are applicable as follows: • 9902-2UDX refers to the 9902-2UDX 3G/HD/SD-SDI Dual-Channel Up-Down-Cross Converter / Frame Sync /

• Cobalt Digital Inc 9902-2UDX, 3 9902-2UDX Function Menu List and Descriptions 3-52 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) AFD Map sub-tab allows bidirectionally re-aspecting from 4x3 frames to companion 16x9 frames, and allows customizing aspect ratio settings for the AFD codes (and the corresponding WSS and VI translation equivalents) supported by the card. Table 3-2 9902-2UDX Function Menu List — continued • • • • • • • When the scaler is set to Scaler follow AFD any V, H, pan, or tilt custom changes made here are directly applied to the output vide

• Cobalt Digital Inc 9902-2UDX, 3 9902-2UDX Function Menu List and Descriptions 3-20 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) Input Audio Routing/Controls Provides audio routing, gain, per-channel/bulk audio delay controls, and audio meters. These controls route selected audio sources onto the card 16-channel internal bus (which is used for all audio processing). Note: Input Audio Routing/Controls tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab. Table 3-2 9902-2UDX Function Menu List — continued All audio inputs are transferred thro

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-45 Operating Instructions 9902-2UDX Function Menu List and Descriptions (continued) • Center Cross Controls • Center Cross provides enable/disable of center cross insertion. • Cross Height and Width control height of vertical line and width of horizontal line (from 0% to 100% of 4:3 outputted image area). • Horizontal Line Controls • Horizontal Line provides enable/disable of horizontal line insertion. • Horizontal Line Size controls the width of the hori

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-79 Operating Instructions Troubleshooting Troubleshooting Network/Remote Control Errors Refer to Cobalt ® reference guide “Remote Control User Guide” (PN 9000RCS-RM) for network/remote control troubleshooting information. In Case of Problems Recovering Card From SD Memory Card New production cards come equipped with an SD card installed in a slot receptacle on the underside of the card. The data on this SD card can be used to restore a card should the card become unresponsive (can’t communicate with DashBoard or other remote co

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 1-7 Introduction 9902-2UDX Functional Description Figure 1-1 9902-2UDX Functional Block Diagram EQ/ Reclock Audio Demux • Audio Mux • AES SRC • Delay Offset • Downmix • Output Routing Output Crosspoint 3G/HD/SD SDI IN A Deserialize Path 1/2 PROC VIDEO OUT (SDI) EQ/ Reclock 3G/HD/SD SDI IN B Video ADC CVBS IN Input Select GPIO Control/ Monitor (NOTE 2) Timecode Select/Proc REF IN Framesync/ Pattern Gen Video DAC CVBS OUT 1 2 3 4 Serialize AES Rx Audio ADC AES IN AN-AUD IN AES Tx Audio DAC AES OUT AN-AUD OUT Selected Input RCK EQ/ Reclock 3G/HD/

• Cobalt Digital Inc 9902-2UDX, 3 9902-2UDX Function Menu List and Descriptions 3-44 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) (continued) • Safe Title Area (STA) Controls • STA provides enable/disable of safe title area graticule insertion. • STA Height and STA Width control height and width of insertion (from 0% to 100% of 4:3 outputted image area). • Overlay Color Controls • Overlay Color selects from white or black colors. • Opacity sets the opacity of the overlay for both white/black and inverse color modes. Provides insertion and sizing controls for custom graticules and other markers. A

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 2-7 Installation and Setup Installing a Rear I/O Module RM20-9902-2UDX-H Provides the following connections: • Two 3G/HD/SD-SDI video input BNCs (SDI IN A and SDI IN B) • One SDI/CVBS video input; selectable as 3G/HD/ SD-SDI or CVBS (D/CVBS IN) • Four analog balanced audio inputs (AN-AUD IN 1 thru AN-AUD IN 4) • Two AES audio inputs (AES IN 1 and AES IN 2) • Three 3G/HD/SD-SDI video outputs, selectable as processed or reclocked input (SDI OUT 1 thru SDI OUT 3) • 3G/HD/SD-SDI video output pair, selectable as processed or reclocked input as a pair (SDI OUT 4a and SDI OUT 4b) • Four analog balance

• Cobalt Digital Inc 9902-2UDX, 1 9902-2UDX Functional Description 1-6 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) 9902-2UDX Functional Description Figure 1-1 shows a functional block diagram of the 9902-2UDX. The 9902-2UDX dual-channel card provides two independent signal paths ( Path 1 and Path 2) of UDX conversion, frame sync, and audio embedding and de-embedding on a single card. The two paths share an input and output SDI crosspoint to receive and send two discrete SDI inputs and outputs. The 9902-2UDX also includes AES/analog audio support and CVBS video I/O. In addition to a basic signal presence input failover functi

• 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-39 Operating Instructions 9902-2UDX Function Menu List and Descriptions (continued) Audio LTC controls described below only appear on cards with +LTC licensed optional feature. This feature allows audio LTC from an audio channel to be used as a timecode source, with conversion to a selected SMPTE 12M format on the ou

• 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 1-17 Introduction Technical Specifications 9902-2UDX Rear I/O Modules The 9902-2UDX physically interfaces to system video connections at the rear of its frame using a Rear I/O Module. All inputs and outputs shown in the 9902-2UDX Functional Block Diagram (Figure 1-1) enter and exit the card via the card edge backplane

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-27 Operating Instructions 9902-2UDX Function Menu List and Descriptions Provides support for closed captioning setup.Also provides controls for setting closed captioning absence and presence detection thresholds. Closed Captioning Note: • Closed Captioning tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab. • SMPTE embedded CC controls and processing are correlated only to the

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-29 Operating Instructions 9902-2UDX Function Menu List and Descriptions (Option +COLOR only) Provides color corrector functions for the individual RGB channels for the card program video path. • Color Corrector Color Corrector (On/Off) provides master on/off control of all Color Corrector functions. • When set to Off, all processing is bypassed. • When set to On, currently displayed parameters settings take effect. • Reset to Unity Reset to Unity provides unity reset control of all Color Corrector functions. When Confirm is clicked, a Confirm? pop-up appears, requesting confirmation. �

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-51 Operating Instructions 9902-2UDX Function Menu List and Descriptions (continued) TransMATX AFD/WSS/VI Translation Matrix The table below lists valid translations between WSS, VI, and SMPTE 2016 AFD codes for both 4x3 and 16x9-coded frames. Table 3-2 9902-2UDX Function Menu List — continued Note: Shaded cells indicate invalid translation which cannot be used. Input Output AFD WSS ETSI 625 WSS ETSI 525 VI Description AFD WSS ETSI 625 WSS ETSI 525 VI Description 4:3 Coded 0010 4 4x3 Letterbox 16x9 Top 0010 4 0 1 (NTSC) 2 (PAL) 4x3 Letterbox 16x9 Top 0011 2 4x3 Letterbox 14x9 Top 0011 2 0 1 (NTSC) 2 (PAL) 4x3 Letterbox 14x9 To

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-15 Operating Instructions 9902-2UDX Function Menu List and Descriptions (continued) • User-defined Aspect Ratio Controls Aspect Ratio Horizontal and Aspect Ratio Vertical controls adjust horizontal and vertical zoom percentage. Settings less than (<) 100% provide zoom-out; settings greater than (>) 100% provide zoom-in. (50% to 150% range in 0.1% steps; null = 100.0) • H Pan and V Pan Controls H Pan control shifts horizontal center of image left (negative settings

• 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL 3-3 Operating Instructions Control and Display Descriptions DashBoard™ User Interface (See Figure 3-2.) The card function menus are organized in DashBoard™ using tabs. When a tab is selected, each parametric control or selection list item associated with the function is displayed. Scalar (numeric) parametric values can then be adjusted a

• Cobalt Digital Inc 9902-2UDX, 3 Troubleshooting 3-76 9902-2UDX PRODUCT MANUAL 9902-2UDX-OM (V1.0) Access Card Info panes for specific cards by clicking the card slot position in the Card Access/Navigation Tree pane (as shown in the example in Figure 3-9). Figure 3-9 Selecting Specific Cards for Card Info Status Display By clicking on “Slot 0: MFC-8320-N” in this example, Card Info is displayed for frame Network Controller Card Status for selected card is shown here (in this example, connection OK and “Fan Door Open” alert) Card general inf

• Cobalt Digital Inc 9902-2UDX, 9902-2UDX-OM (V1.0) 9902-2UDX PRODUCT MANUAL i Table of Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Overview ............................................................................................................................. 1-1 9902-2UDX Card Software Versions and this Manual....................................................... 1-2 Cobalt Reference Guides..................................................................................................... 1-2 Manual Conventions............................................................................................................ 1-3 Warning

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• Meinberg GNS181PEX (6 pages) Meinberg Radio ClocksLange Wand 931812 Bad Pyrmont, GermanyPhone: +49 (5281) 9309-0Fax: +49 (5281) 9309-30https://[email protected]: Low Profile GPS / GLONASS / Galileo / BeiDou Clock (PCIExpress)The board GNS181PEX is designed as a low profile board for computers with PCI Express interface. Therear slot cover integrates the …

• LevelOne WNC-0301 (77 pages) LevelOne WNC-0301 11g Wireless PCI Card Quick Installation Guide English Português Deutsch Svenska Français Slovenšina Español 繁體中文 Dutch 한국어 Dansk  Italiano   …

• Atlantis Land A02-SG32 (2 pages) 10/100/1000Mbps NWay Gigabit Ethernet Card for 32/64 bit PCI Bus-equipped personal computers: ideal for speeding up data transfers for network servers and other computers such as those used for video-conferencing, that send and/or receive large amounts of data. Includes latest networking technologies, such as VLAN and multicasting support, that use network b …

• Renkforce 1216477 (4 pages) D Bedienungsanleitung PCIe-Dual-Gigabit-Karte Best.-Nr. 1216477Bestimmungsgemäße VerwendungDas Produkt ist zum Einbau in einen dafür geeigneten Computer vorgesehen und stellt dort zwei Gigabit-Netzwerkports zur Verfügung. Die Sicherheitshinweise sind unbedingt zu befolgen!Eine andere Verwendung als zuvor beschrieben, führt zur Beschädigung dieses Pr …

• Barco MICB-1340 (4 pages) MICB-1340The MICB-1340 is a high-performance PCI-e based compression board optimized for medical imaging applications. Installed on a server, it compresses images to stream them efficiently across a network within a client-server or remote computing environment.By relieving the main CPU from the compression task, the MICB-1340 …

• Allied Telesis AT WCP201G AT-WCP201G-001 AT-WCP201G-001 (2 pages) Allied Telesis www.alliedtelesis.comDatasheet | WirelessAT-WCP201 SeriesWireless LAN PCI AdapterAT-WCP201GIEEE802.11g, 108Mbps High Speed WirelessLAN PCI AdapterHigher Speed and longer reachAllied Telesis’ AT-WCP201G provides desktopPC users with access to the wireless networkfor flexibility and freedom.You are free to move your PCs within the wireless cov …

Comments, Questions and Opinions: