Manualios.com

Goscam GB8209 Operation Manual

Goscam GB8209 Manual Online:

3.95, 2169 votes
Goscam GB8209 User Manual
Goscam GB8209 User Guide
Goscam GB8209 Online Manual

Text of Goscam GB8209 User Guide:

  • Goscam GB8209, 3. Structure 3-1. Structure of Camera 3-2. Structure of Receiver Antenna Antenna Speaker IR LEDs TFT-LCD Power On/Off Alarm Switch Sensitivity Switch Channel Switch Battery Cover Battery Cover Lens Power Socket Channel Indicator AV Out Volume Switch Power On/Off Sleep Button Power Socket Sensor Socket Channel Button Eliminate Alarm Button

  • 4. Installation 4-1. Installation of Camera 4-1-1. Basic installation of Camera 2. Connect the camera to the adapter and then slide the power switch to ON position. Note: This camera can also use dry battery as power supply. Please load 4 AA batteries to the battery compartment at the back of camera with their polarities matched. The AC adapter will work instead o

  • Goscam GB8209, 3. Rotate the rounded head of camera to a suitable angle for surveillance. 1. Check out the right side of the camera and there is the channel switch marked as CH1, CH2, CH3, CH4. Each of them can be selected separately for the purpose of the multi-camera working situation or interference avoidance. 2. Press channel button of the receiver to select the same channel as the camera, The pictures will be displayed on the screen. 30 30 4-1-2. Camera channel setup 4-1-3. Camera alarm setup CH4 CH3 CH2 CH1 Off Motion Sensor Sound Low Middle High Ch1: 2,414MHz Ch2: 2,432MHz Ch3: 2,450MHz Ch

  • Goscam GB8209, 2. Connect the sensor jack to the camera sensor socket, put the sensor end in cotton diaper if you select the Bed-wetting Sensor detection. * Specialists recommend the sensor is not suitable for disposable panty diaper; and not suitable for touching skin directly. Motion Alarm Setup: It refers to the alarm against various movements. If you slide the alarm setting switch to Motion position, and select Sensitivity switch. Afterward, the system enters the motion alarm mode. When a movement is actually detected, the alarm begins until you press the Eliminate Alarm Button. After less than 1

  • Goscam GB8209, 4-2. Installation of Receiver 4-2-1. Basic installation of Receiver 1. Connect the receiver to the adapter and then slide the power switch to ON position. 2. Adjust the volume control to a desired level. Note: This receiver can also work on dry battery. Please load 4 AA batteries to the battery compartment at the back of receiver with their polarities matched. The AC adapter will work instead of batteries after it is plugged. If the receiver is left unused for a long period of time, please unplug

  • Goscam GB8209, 3. Set the channel of receiver to be the same as camera by pressing the channel button continuously, and the pictures will display on the screen. Note: For more clear pictures, please connect the receiver to a monitor/TV with AV cable (yellow for video and red for audio). AV cable 1. Volume adjustment Slide Volume Switch to adjust the volume of the receiver. 2. Channel selection Press CH button to select the appropriate channel. 3. Channel Looping Hold the CH button for three seconds to enter the loop mode. All the available channels will be displayed one by one (default interva

  • Goscam GB8209, 5. Specification CAMERA RECEIVER GENERAL Item Value Transmission Frequency Transmission Power Operating Frequency Unobstructed Effective Range Modulation Mode Operating Temperature Operating Humidity Imaging Sensor Type Picture Total Pixels Minimum Illumination Night Vision Distance Bandwidth Battery Working Time Motion Alarm Distance Sound Detection Sensitivity Consumption Current(Max.) Power Supply Dimensions(W D H) Weight(About) LCD Screen Type Effective Pixels Receiving Sensitivity Consumption Current(Max.) Battery Working Time Power Supply Dimensions(W D H) Weight(About) ISM 2,400~2,483 MHz 10mW/C

  • 6. FCC information This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance

  • Goscam GB8209, Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed used in accordance with

Related Products and Documents (Baby Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Boston Acoustics Recepter-P Operation & user’s manual boston-acoustics/recepter-p-5JK.pdf 06 Aug 2023 4 0.44 Mb
2 Canon FAXPHONE L75 Operation & user’s manual canon/faxphone-l75-F7C.pdf 19 Nov 2023 201 1.86 Mb
3 Lenovo ThinkStation D20 Installation & configuration manual lenovo/thinkstation-d20-L24.pdf 23 Mar 2024 76
4 Cygnus CYG2400/460/24 Operation & user’s manual cygnus/cyg2400-460-24-L56.pdf 03 Dec 2022 29
5 Toshiba Satellite P100 Series Specifications toshiba/satellite-p100-series-FAD.pdf 12 Mar 2024 2 0.24 Mb
6 JVC LT-Z40SX6 Service manual jvc/lt-z40sx6-8UL.pdf 26 Feb 2023 94

Similar Resources:

  • FreePP

    Camtalk BV1501

    (2 pages)
    LANWPS/ResetBlue on:Idle modeBlue blinking:Incoming CallRed on:Booting upRed blinking:ErrorPink on:Ongoing CallPress 1 time for WPS. Over 3 seconds for Reset.Insert USB storage(FAT32) for recording functions.Video on/offEnable or disable during conversation.Power LED & Switch, Choose scenario you want.Adjustable CameraStatusVolume ControlVideo IndicatorP …
  • VTech

    VM344

    (2 pages)
    Congratulationson purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich …
  • VTech

    VM3261

    (2 pages)
    What’s in the box VM3261 baby monitor system Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.VM3261Quick start guideStrangulationHazardKeep this cord out of reach of children. The cord needs to be at least three feet away from the child at all times. Do not use with an extension cord. Do not re …
  • Angelcare

    AC601

    (13 pages)
    OWNER’S MANUALSIMPLICITY MOVEMENT SENSOR WITH SOUND BABY MONITORModel AC601for your peace of mindMovement AlarmYour monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected. Deactivate the movement function to use the monitor without the Sensor Pad.B …
  • switel

    BCF800

    (48 pages)
    Schnurloses A/V−ÜberwachungssystemSystème de surveillance sans fil A/V Sistema di sorveglianza A/V cordlessCordless A/V Monitoring SetBedienungsanleitungMode d’emploiIstruzioni per l’usoOperating InstructionsBCF800 …
  • Fisher-Price

    G4594

    (24 pages)
    www.fisher-price.come InstructionsModel Number G4594f InstructionsNuméro de modèle : G4594S InstruccionesNúmero de modelo: G4594e Product features and decoration may vary from the photo above.f Les caractéristiques du produit et les décorations peuvent varier par rapport à la photographie. S Las características y decoración del producto pueden variar …

Comments, Questions and Opinions: