Hestia H102 Operation & User’s Manual

Text of Hestia H102 User Guide:

• Hestia H102, 04 Multi-purpose Mount Rechargeable battery Screw and double-sided tape User Manual AC adapters x2 5V 1A Manufacturer Chou Sen Electronics (Shenzhen) Co., Ltd. Kuantech Company Ltd. Model number CS6D050100F series KSAS0050500100 series Input 100-240V ~ 50/60Hz 10 0- 24 0V ~ 50/ 60 Hz Output A/C Adapter Information Manufacturer J&Y Technology Co., Ltd. Shenzhen HighPower Technology Co., Ltd. Model number Ni-MHAAA850 3.6V HFR-AAA900x3(B) Specification Ni-MH rechargeable 3.6V Ni-MH rechargeable 3.6V

• Hestia H102, 23 Warranty Information 7 Legal rights vary from country to country. Some countries do no allow the exclusion or limitation of incidential or consequential damges, so the above limitation may not apply to you. This warranty does not apply to a product which has been damaged as a result of improper maintenance, accidents, improper voltage supply, or other misuse. The warranty is also void if the owner repairs or modifies the product in any way. We are not liable for any incidental or consequential damages with regard to this product. The warranty also excludes any liability other than what is stated above. No o

• Hestia H102, 11 Operation 5 5.1 General Operation User operation is divided into 2 different modes. General operation is referring to user operations when the capturing image being displayed on screen. 5.1.1 Power ON/OFF To power on Monitor unit, press the power button and hold for 1 second. The Power LED will emit blue light to indicate the system is on. To power on Camera unit, slide the power switch to the 'ON' position. The Power LED will emit blue light to indicate the system is on.

• 5.5.4 Auto Scan Mode Auto scan mode is an automatic camera switching function to all paired camera units at an interval of 15 seconds. The display sequence is at numeric order of camera number. For example : Cam1, Cam3 and Cam4 are paired, the sequence will be cam1 > cam3 > cam4 and loop. During auto scan mode, VOX function will

• Hestia H102, 3.2 Overview Monitor Unit Camera Unit 06 1 2 8 13 12 15 14 9 3 4 8 2 7 1 11 10 5 12 6 Power ON/OFF Video off Button Antenna Power / Charging Indicator Sound Level Indicator TFT Display Brightness + / -B utton Menu / Button Microphone Speaker Volume / Button DC Jack Strap Holder Push to talk (PPT) Button Flip Stand Battery Door 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Light Sensor Antenna Power ON/OFF Button Lens Microphone Pairing Switch Speaker Power Indicator DC Jack Tripod Socket Camera Stand Cable Mount 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 3 6 7 9 10 11 5 4

• Hestia H102, 02 This product is intended for indoor use only. This product is not a toy. Do NOT allow children to play with it. When not using the product for long periods, remove the battery and disconnect the A/C adapters from electrical outlet. Please review product information before operation Monitor: Product information is located at battery compartment Camera: Product information is located at back side of camera unit, after disassembled the camera stand Do NOT attempt to open the monitor unit, camera unit, battery and A/C adapter. No user-serviceable parts inside. Risk of electrical shock, fire or death. This pro

• Hestia H102, 16 5.4 Menu Mode - Audio VOX Delay Duration of silent before entering VOX mode 30 seconds 60 seconds 5.4.1 VOX Delay VOX is a power saving feature to turn off video and audio system of monitor unit, when the environment of camera side is silent. The system will be resumed automatically when camera unit detect noise. There are two user settings available for VOX function. VOX Delay is referred to the duration of silence before entering VOX mode. VOX set OFF OFF VOX set ON and enter VOX mode after 30 seconds silence 3 minutes VOX set ON and enter VOX mode after 60 seconds silence VOX set ON and enter VOX mode after 3 minutes silence 5.4.2 VOX Sensitivity VOX S

• Hestia H102, 22 Properly adjust brightness level based on your needs. Don't always use maximum level as it consumes highest power. Properly adjust volume level based on your needs. Alike brightness setting, the higher level will consume higher power. Use Video Off mode (section 5.1.7). It will save over 20% power than consumption. Use Auto Mute mode (section 5.4.5) for a long silence environment. Act as a white noise eliminator, it will turn off the audio system to save power and resume to work only noise is detected. Use VOX mode if applicable (section 5.4.1). When VOX mode is activated, both video and audio system will be tempor

• Safety Instruction and Warnings 1 01 Strangulation Hazard - Keep the adapter cord out of the reach of children. Never place the camera or cord within 3 feet (1 metre) of a crib or playpen. Cord Protection - Protect the adapter cord. Route cord so that they are not walked on or pinched by items or against them. Choking Hazard - This product cont

• Product Features and Overview 3 3.1 Features and Specifications Monitor unit Indicator P ower (Blue) Battery Charging (Red)

• Hestia H102, Content 3.1 Features and Specifications 3.2 Overview 4.1 Powering and Battery Charging Monitor Unit 4.2 Powering Camera Unit 4.3 Mounting Camera Unit 4.4 Back Mount Mechanism 5.1 General Operation 5.1.1 Power ON/OFF 5.1.2 Icons Definition 5.1.3 Volume Adjustment 5.1.4 Brightness Adjustment 5.1.5 Switching Camera Number 5.1.6 Zoom 5.1.7 Video Off Mode 5.1.8 Intercom 5.1.9 Sound Level Indicator 1-2 3-4 5-6 7-10 11-19 5 6 7 9 10 8 11 11 12 12 13 12 13 13 13 13 14 15 5.3 Menu Mode - Video 5.2 Menu Mode 5.3.1 Color Saturation 5.3.2 Night Vision 5.3.3 Zoom Mode 15 15 15 2 Components List 3 Product Features and Overview 4 Getting Started 1 Safety Instructions and W

• Hestia H102, 13 5.1.5 Switching Camera number Tips 5.1.7 Video Off mode Video off mode is for saving power purpose by shutting down the screen of monitor unit manually. The wireless transmission and audio system will remain to operate during video off mode. To enable the video off operation, press the power button once. Press any button of monitor unit will exit video off mode immediately. 5.1.8 Intercom Intercom (two-way talk) can be activated by press and hold PTT (Push to talk) button. Upon activation, voice signal will be transmitte

• Hestia H102, Camera pairing information will not be deleted during factory default reload. TipsTips 5.6 Menu Mode - Load Default Select 'Restore factory settings…' function, and press 'OK' button. System will prompt to reconfirm the action, select 'YES' and press 'OK' button will restore the factory default. Select 'NO' and press 'OK' button will go back to Load Default page. 20

• Hestia H102, Getting Started 4 4.1 Powering and battery charging Monitor Unit 07 pic.1 pic.3 pic.2 Bla ck Red As shown in pic. 1, remove the silicon sleeve and flip stand from monitor unit. Then open the battery door. Insert the rechargeable battery to the battery bay and plug into the battery socket as instructed in pic. 2. Close the battery door, install the silicon sleeve. Plug the A/C adapter into the wall electrical outlet. Then attach the cord to the DC Jack as shown in pic. 3. The battery ch

• Hestia H102, 4.2 Powering Camera Unit 08 pic.4 4.3 Mounting Camera unit The camera unit was designed to s u p p o r t d i f f e r en t m o u n t i n g mechanism, from simply putting on a table to mounting on a wall by screw or double-sided tape. 1. Tighten the provided screw the provided screw onto the wall surface by a screw driver, until the screw only sticks out by about 6mm as shown in pic. 5. 2. Remove the base plate from camera stand, and hook the camera stand onto the screw. Mount the camera unit by screw pic.5 6mm Plug

• Hestia H102, 5.4 Menu Mode - Audio 5.4.1 VOX Delay 5.4.2 VOX Sensitivity 5.4.3 Audio Alert 5.4.4 Sound Level LED 5.4.5 Auto Mute 5.4.6 Intercom Volume 5.5 Menu Mode - Camera 5.5.1 Camera Selection 5.5.2 Camera Pairing 5.5.3 Lullaby Playback 5.5.4 Auto Scan Mode 5.5.5 Split Screen Mode 5.6 Menu mode - Load Default 21-22 23 24 16 16 16 17 16 17 17 17 17 18 18 19 19 20 6 Troubleshooting and Tips 7 Warranty Information 8 FCC statement

• Hestia H102, This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

• Hestia H102, 14 Title Function / Options Description 5.2 Menu Mode 4 main titles are available - Video, Audio, Camera and Defaults. At different title, different functions and their current settings will be shown. S h ow a b r i ef d e sc r i p t i o n o f s e l ec t e d components. Menu mode can be activated by pressing either menu button or menu once. The below screen will be displayed during menu mode. Title Function / Options Description Video Settings Audio Settings Camera Settings Load Defaults To select different title, press

• Hestia H102, Component List 2 Monitor unit with flip stand 03 Thanks for purchasing Hestia H102 wireless monitoring system. Please make sure you have the following components in the packing. Camera unit with camera stand For combo kit, one more camera unit is bundled with H102 wireless monitor system.

• 10 Power cord cable can be inserted to the cable mounted as shown in pic. 8. Both monitor and camera unit carried an identical back mount mechanism. Different accessories (flip stand, multi-purpose mount, camera stand) can be installed to either monitor unit or camera unit based on different needs. 4.4 Back Mount Mechanism

Related Products and Documents (Baby Monitor):

Comparable Devices:

Similar Resources:

• Topcom BABYTALKER 1020 (121 pages) BABYTALKER 1020USER GUIDE / HANDLEIDING / MANUEL D’UTILISATEUR BEDIENUNGSANLEITUNG / MANUAL DE USUARIO / BRUKSANVISNING BRUGERVEJLEDNING / ANVÄNDARHANDBOK / KÄYTTÖOHJE MANUALE D’USOMANUAL DO UTILIZADOR / UŽIVATELSKÁ PŘÍRUČKA Ο∆ΗΓΙΕΣ ΧΡΗΣΗΣ / HASZNÁLATI ÚTMUTATÓ / INSTRUKCJA OBSŁUGI UŽÍVATEL’SKÝ MANUÁLV3.0 - 07/12® …

• Angelcare AC300-D (48 pages) 04/17Bewegungsmelder AC300-D(Deutsches Modell marineblau-weiß)BedienungsanleitungBitte beachten Sie unbedingt die dem Gerät beiliegende Broschüre „BasicLifeSupport – Leitfaden der Lebensrettenden Sofortmaß nahmen im Säuglings alter“.Die Broschüre enthält wichtige Informationen zur Hilfe im Notfall.FR 19EN 33DE 211CFO_AC300-D-Manual_Funny_12594. …

• VTech VM343 (2 pages) Quick start guideVM343VM305Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.Specifications are subje ct to change without notice.© 2015 VTech Communications, Inc.All rights reserved. 04/15. VM343_US_QSG_V1.0Document order number: 96-010482-010-100Sound activation When the infrared LEDs are on, th …

• Philips AVENT SCD485 (101 pages) 3140 035 26801©2011 Koninklijke Philips Electronics N.V.All rights reserved.SCD485_SCD486_EEU_UM_V1.00168Register your product and get support atwww.philips.com/welcomeEN User manual 5BG  CS  E …

• Bellman & Symfon BE1491 (4 pages) Buttons and connectionsIn the box  BE1491 Visit baby monitor 21.5 V AA alkaline batteries Pre-mounted table stand Screw and wall plugPower and battery Battery power 21.5 V AA lithium or alkaline type batteries Power consumption Active < 70 mA Idle position < 400 μA Operation time Alkaline batteries ~ 6 months Lithium …

• Philips SBCSC478 (2 pages) For preview purpose onlyListen to your baby withoutinterferenceThis Philips digital baby monitor system, using DECT technology, ensures absolutely no interference from other systems and lets you get on with your work or simply relax by yourself or with friends. You hear only your baby!Reliability & Piece of mind• Forget about interference, disturbances …

Comments, Questions and Opinions: