Manualios.com

Hitachi PV-XE90 Instruction Manual

Hitachi PV-XE90 Manual Online:

4.85, 2971 votes
Hitachi PV-XE90 User Manual
Hitachi PV-XE90 User Guide
Hitachi PV-XE90 Online Manual

Text of Hitachi PV-XE90 User Guide:

  • E-1 Instruction Manual Hitachi Cordless Stick Cleaner PV-XE90 Model Thank you for purchasing a Hitachi Cordless Stick Cleaner. This cleaner is for household use only. Do not use for business purposes or purposes other than cleaning. For proper use, please read these Operating Instructions thoroughly before using the cleaner. Keep this manual for future reference in an easily accessib

  • Hitachi PV-XE90, E-2 Part names and assembly Charging station → (P.E-8) Indicator lamp → (P.E-8, E- 9) Handle storage button → (P.E-3, E-14) Handy cleaner release button → (P.E-9) Dust disposal button → (P.E-12) Stick cleaner control button → (P. E- 9) Stick cleaner handle Dry mop head release button Base Cord Stand Plug Protrusion Crevice nozzle Attachment groove Inlet Handy cleaner → (P.E-9, E-11, E-14) Dry Mop Head → (P.E-10, E-18, E-19) Protrusion Attachment groove Stand Click Stick cleaner → (P.E-9, E-10, E-14) Dust case Sponge filter Cyclone chamber Clean filter Dust cas

  • Hitachi PV-XE90, E-3 Stick cleaner handle operation When folding the stick cleaner handle Risk of injury Do not hold the area around the rotating section of the stick cleaner handle when folding or raising the stick cleaner handle. 1 Slowly rotate and fold. 2 Slowly rotate. Handle storage button WARNING Rotating section When raising the stick cleaner handle, slowly rotate and raise it until you hear a "click" sound. Hold the stick cleaner handle and press the handle storage button to release the stick cleaner handle lock Attachment accessories Crevice nozzle (1 pc.) → (P.E-11) Multi angle brush

  • Hitachi PV-XE90, E-4 Safety precautions 100- 240V Cord Charger contacts Plug SocketCharging station Contacts Stick cleaner Contacts Handy cleaner Exhaust Dry Mop Head Stick cleaner Handy cleaner Stick cleaner control button Handy cleaner control button In order to prevent personal injury or damage to the property of the user or other persons, please read and understand (the safety precautions) thoroughly and follow them correctly. ■ The severity of injury or damage that occurs when ignoring instructions and improperly using the cleaner is classified and explained below. Be sure to follow these

  • Hitachi PV-XE90, E-5 WARNING Socket, plug, cord, charging station ● Use AC 100-240 V socket. ● Periodically wipe off dust, etc. from the plug with a dry cloth. ● Make sure to fully insert the plug. ● Disconnect the plug from the socket when performing charging station maintenance. If the cord is damaged, it must only be replaced by the Hitachi authorized service agent in order to avoid a hazard. z Do not damage the cord. [Do not damage, tamper, unreasonably bend, pull, twist, tuck, or place heavy objects on the cord, etc.] z Do not use damaged cords and plugs, or loose socket. z Do not let the cord get caught

  • Hitachi PV-XE90, E-6 Handle, others Exhaust ● Do not block the exhaust Doing so may cause fire or handy cleaner deformation due to overheating. ● Do not expose your body to the air released from the exhaust for long periods of time Doing so may cause low-temperature burns. Do not expose your body for long periods of time. Safety precautions ● When carrying the stick cleaner, do not hold the handy cleaner handle. The stick cleaner may fall and cause injury or damage the floor. ● Keep away from fire. Shorting due to deformation may cause electrical shock or fire. Flames m

  • E-7 To prevent malfunctions, etc., follow the directions below. Also, for proper use, please read the Note in the main text thoroughly. ● Do not subject the power head to strong physical shock Doing so may cause damage. ● Do not vacuum the following objects Doing so may cause abnormal odors or malfunctions. • Water or liquids • Wet objects • Desiccants (moist

  • Hitachi PV-XE90, E-8 Insert the plug of the charging station into the socket. Set the stick cleaner on the charging station 1 2 ● Insert the charging station protrusion into the attachment groove of the stick cleaner. ● The indicator lamp lights up in red when the stick cleaner is set on the charging station. ● If the indicator lamp does not light up in red, re-set the stick cleaner so that there is no gap between the stick cleaner and the stand of the charging station. If there is a gap between the stick cleaner and the stand of the charging station, the stick cleaner may not get charged properly. ● When fully

  • Hitachi PV-XE90, E-9 How to operate Hold the stick cleaner handle and pull the stick cleaner upward Remove the stick cleaner from the charging station Press the control button of the stick cleaner 1 2 ● The indicator lamp lights up in green and operation begins. ● Every time the control button of the stick cleaner is pressed, the operation switches in the following order: "High"> "Standard"> "Power off". ● To stop operation, switch to "Power off". The indicator lamp and operation stops. Risk of injury or damage to the

  • Hitachi PV-XE90, E-10 How to clean Flooring To prevent scratching of the floor, move along the grain of the flooring. ● When cleaning new flooring, traces may be left on the polished flooring surface. ● If dust remains on the floor after pulling the head towards yourself, lift the head and vacuum again. CAUTION Wheels Brushes Brushes You can clean proficiently by moving the head back and forth across floor. Stick cleaner ■ Use in accordance with the floor type Risk of damage to the floor. The floor may be damaged if it is easily damaged such as cypress or padded flooring * . * Padded flooring is flooring where the surface is cushioned using vinyl chloride, etc. Risk of damage to

  • Hitachi PV-XE90, E-11 ● When using the multi angle brush nozzle, do not let it fall or add excessive force in the direction of the arrow in A . Doing so may result in damage. ● You can wash the multi angle brush nozzle with water. After washing, thoroughly air dry before use. Vacuuming water may result in damage. ● If fibrous dust clogs the end or interior of the multi angle brush nozzle, suction power is reduced, so remove the dust. A Note ● This nozzle cleans narrow crevices and corners. For cleaning corners For cleaning crevice of a sofa ● Use by attaching to the inlet of the handy cleaner. Inlet Crev

  • Hitachi PV-XE90, E-12 Emptying the dust case Fine dust may disperse in the air when emptying the dust case. Empty the dust case in a well-ventilated environment such as outdoors, or wear a mask and avoid breathing in the dust. Cyclonic cleaners have the advantage of not requiring paper bags, but to clean with high suction power, we recommend frequent disposal of dust and filter maintenance. Note If you vacuum dust after exceeding the "Max line", the dust will spill from the inlet of the dust case. To clean with high suction power, we recommend frequent disposal of dust. Note Detaching the dust case Checking the Max line Det

  • Hitachi PV-XE90, E-13 Emptying the dust case Emptying the filters Attach in the reverse order of removal. Insert the handy cleaner handle protrusion into the hole of the dust case Attach until you hear a "click" sound. Attach the cyclone chamber to the dust case 4 Attach the dust case to the handy cleaner handle. 5 Attach the maintenance brush to the stand of the charging station 6 Cyclone chambe r Dust case Dust case Handy cleaner handle Protrusion Hole Click Remove the sponge filter and clean filter from the cyclone chamber 1 Removing stuck dust 2 After washing, remove excess water and air dry it for approx. 12 h

  • E-14 How to store Stowing the cleaner Protrusion Attachment groove Charging station Charging station After using the stick cleaner Press the control button of the stick cleaner to stop operation → (P.E-9) Insert the stand protrusion into the attachment groove of the stick cleaner → (P.E-8) When you set the cleaner on the charging station while it is operating, operation stops and cha

  • Hitachi PV-XE90, E-15 Maintenance Perform maintenance when you are concerned about dirt. Wring out a soft cloth soaked with water before wiping. Stick cleaner, attachments, attachment accessories Do not use alcohol, cleansers, chemical dust cloths, etc. They may cause cracks or discoloration. Note Risk of eruption, fire, electric shock, or injury. ● Disconnect the plug of the charging station from the socket when performing charging station maintenance. ● Do not use flammable objects, combustibles (thinner, benzene), etc. WARNING Dust case, filters, cyclone chamber Fine dust may disperse in the air when performing maintenance. Empty the dust case in a well-ventilated environm

  • Hitachi PV-XE90, E-16 Clean filter Cyclone chamber Cyclone chamber Remove the clean filter from the cyclone chamber. 1 Open the cyclone chamber lid. 2 Wash the cyclone chamber and cyclone chamber lid with water. 3 Thoroughly dry it before closing the cyclone chamber lid. 4 CAUTION Risk of injury. You may have unintentionally vacuumed sharp objects such as glass shards or pins. Be careful when performing maintenance. Gently remove the dust stuck inside before washing with water. Note ࡜ࡵࡿ ࡣࡎࡍ Release Release Lock Lock Cyclone chamber lid Handle Cyclone chamber Cyclone chamber lid Release Lock ࡜ࡵࡿ ࡣࡎࡍ Release Release Lock Lock Cyclone c

  • Hitachi PV-XE90, E-17 Maintenance Attach the cyclone chamber to the dust case. 5 Sponge filter, clean filter Remove the sponge filter from the clean filter. 1 Wash the sponge filter with water by gently pressing it 2 Wash the clean filter with water using the maintenance brush 3 ● Wash away the dust stuck deep in the folds of the clean filter with water. ● After washing, remove excess water and air dry it for approx. 24 hours. (The drying time varies depending on the environment and the season) Attach in the reverse order of removal. → (P.E-13) Risk

  • Hitachi PV-XE90, E-18 CAUTION Risk of damage to the floor. ● If dust gets tangled in the wheels, the wheels cannot rotate, which may cause wear and tear and floor damage. Wheels Tweezers Remove tangled dust using tweezers, etc. ● Perform maintenance when suction power is weak or when you are concerned about dirt. ● We recommend periodic maintenance (about once a month). Dry Mop Head Remove tangled dust Wheels Crevice nozzle Crevice nozzle Brushes Rotating sections Vacuum stuck dust using the crevice nozzle. Removing stuck dust Protective filter Remove the protective filter from the handy cleaner handle 1 Gently press and wash with water. 2 Prote

  • E-19 Troubleshooting Maintenance Troubleshooting Problem Things to check Instructions Page Suction power is weak. Emptying the dust case. Clean the filter. P.E-16 P.E-18 Remove the dust. Remove the dust. Is the dust case full of dust? Is dust stuck in the filters? Is dust clogging the cyclone chamber inside the dust case? Is dust clogging the dry mop head? P.E-17 P.

  • Hitachi PV-XE90, E-20 Problem Things to check Instructions Page Is the plug of the charging station firmly inserted into the socket? Firmly insert the plug. P.E-8 Is the stick cleaner securely set on the charging station? Re-set the stick cleaner so that there is no gap between the stick cleaner and the stand of the charging station. P.E-8 Is the handy cleaner securely attached to the stick cleaner? Securely attach it. P.E-14 Is the battery fully charged? When fully charged, the indicator lamp turns off. P.E-8 Are the metal contacts of the charging station or stick cleaner dirty? Remove any dirt on the contacts with a d

  • Hitachi PV-XE90, E-21 Replacement parts ● When replacing the battery, also replace the handy cleaner handle. (The battery is built into the handy cleaner handle.) ● Since batteries are consumables, a fee will be charged. Crevice nozzle Multi angle brush nozzle Maintenance brush No. PV-BA100-017 crevice nozzle when ordering No. PV-XA100-910 multi angle brush nozzle when ordering Clean filter (with sponge filter) Protective filter No. PV-XE90 003 (Deep Red) No. PV-XE90 004 (Pure White) handy cleaner handle when ordering No. PV-BA100-005 protective filter when ordering No. PV-BC200-007 clean filter when ordering H

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Vanguard 6435 Installation manual vanguard/6435-M59.pdf 04 Mar 2024 128 2.63 Mb
2 PRESONUS DigiMAX 96k Product review presonus/digimax-96k-SJY.pdf 03 May 2023 3
3 Honeywell CM701 Operation & user’s manual honeywell/cm701-8AK.pdf 01 Oct 2022 16 0.22 Mb
4 Cooper & Hunter SOPHIA CH-18MSPH-230VO Installation manual cooper-hunter/sophia-ch-18msph-230vo-47S.pdf 07 Feb 2024 24
5 Gin NAZCA II Operation & user’s manual gin/nazca-ii-5XI.pdf 09 Dec 2023 23
6 Toshiba AL13SEL900 Specifications toshiba/al13sel900-6HA.pdf 09 Mar 2024 2 0.57 Mb

Similar Resources:

  • Pentair

    SandShark

    (48 pages)
    � …
  • Panasonic

    MC-CG663

    (11 pages)
    © 2006 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying and distribu-tion is a violation of law.Order No.VCB0605008CEVacuum CleanerMC-CG663/MC-CG663KMC-CG661/MC-CG661KDestination :Europe …
  • TEFAL

    X-plorer 75 Series

    (35 pages)
    RU Руководство пользователяPL Podręcznik użytkownikaEN User’s guideEE KasutusjuhendLV Lietotāja rokasgrāmataLT Naudotojo vadovasTR Kullanım kılavuzuX-plorer Serie 751.2.3.4.5.6.7.TEST …
  • Samsung

    SC06H70x0H Series

    (20 pages)
    EnglishVacuum Cleaneruser manual Thank you for purchasing a Samsung product.✻ Please read the User Manual thoroughly before operating the vacuum.✻ For indoor use only.SC06H70*0H Series DJ68-00721J (EN)-00.indd 1 14. 10. 23. �� 11:15 …
  • Sealey

    PC455

    (3 pages)
    INSTRUCTIONS FOR: VACUUM CLEANERS AND FRONT MOUNTED SQUEEGEESMODEL: PC455, PC477, PC455AK1, PC477AK1 1. SAFETY INSTRUCTIONS1.1. ELECTRICAL SAFETY WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check all electrical products, before use, to ensure that they are …
  • SSP

    Jet-Kleen JK-FFP1

    (8 pages)
    JET-KLEENTMSafe Personnel Blow-Off Gun & Drying SystemInstallation & Operation ManualMODELS:JK-FFP1JK-FFP1VJK-FFP2JK-FFP2VJK-WTB1FJK-WTB1FVJK-WTB2FJK-WTB2FVSPECIALIZED SAFETY PRODUCTSA Division of The A.W.T. World Trade GrouppSSWALL-MOUNT UNITPORTABLE UNITOPTIONAL STAINLESS-STEEL ENCLOSUREA Product of …

Comments, Questions and Opinions: