Apogee ensemble Operation & User’s Manual

Text of Apogee ensemble User Guide:

• Apogee ensemble, APOGEE ELECTRONICS Ensemble – User’s Guide 21 Conguring Audio Software Apps gure 28 gure 29 gure 30 MOTU Digital Performer To select Ensemble as hardware I/O: 1. In Digital Performer, open Setup > Congure Audio System > Congure Hardware Driver. (gure 28) 2. Set Master Device to Ensemble (gure 29) 3. Set Work Priority to Low (gure 29) To control Ensemble’s settings: 1. In Apogee Maestro, open Window > Settings. Steinberg Nuendo To select Ensemble as hardware I/O: 1.In Nuendo, open Devices > Device Setup and select VST Audiobay in the Devices column. (gure 30) 2. Set Master ASIO Driv

• Apogee ensemble, APOGEE ELECTRONICS Ensemble – User’s Guide 3 Introduction Ensemble is a digitally–controlled Firewire audio interface specically designed for Apple Macintosh computers. From mic preamps to Mac Core Audio connectivity to headphone outputs, Ensemble includes all that’s necessary for a high–quality Mac–based recording system. Ensemble includes several of Apogee’s Core technologies, including: SoftLimit Soft Limit is an analog peak limiting circuit that instantaneously and gracefully controls transient peaks, thereby allowing an additional 4 dB of headroom. Soft Limit may be enga

• Apogee ensemble, APOGEE ELECTRONICS Ensemble – User’s Guide 5 3. OS X conguration From your Mac’s Apple menu bar, open the System Preferences window, then click on the sound icon (gure 5). In the Sound Preferences window click on the Output tab and select Ensemble (gure 6). gure 5 gure 6 4. iTunes playback Open iTunes, select an audio le and initiate playback (gure 7). Press the OUTPUT encoder knob until the 1 LED is lit and adjust the level in your head- phones (gure 8). gure 7 gure 8 Getting Started Quickly

• Apogee ensemble, APOGEE ELECTRONICS 26 Ensemble – User’s Guide Be sure to register your Ensemble, either by lling in the enclosed Registration Card or by completing the on–line registration form at our Web site: http://www.apogeedigital.com/support/. If you do so, Apogee can contact you with any update information. As enhancements and upgrades are developed, you will be contacted at the registration address. Firmware updates are free for the rst year of ownership unless otherwise stated. Please address any inquiries to your dealer or directly to Apogee at: APOGEE ELECTRONICS CORPORATION, 1715 Berkele

• Apogee ensemble, APOGEE ELECTRONICS Ensemble – User’s Guide 7 6. Recording Connect a mic to the MIC 1 rear panel connnec- tion (gure 13). or an instrument to the HI–Z 1 front panel con- nection (gure 14). In Logic, set a track’s input to Analog 1 and its output to Analog 1/2 and record-enable the track (gure 15). Press the front panel INPUT encoder knob until the Pre 1 LED is lit, and turn encoder to obtain a proper recording level on the record–enabled track (gure 16). You’re now ready to record! gure 13 gure 15 Getting Started Quickly gure 16 gure 14

• APOGEE ELECTRONICS 8 Ensemble – User’s Guide Making Settings with Software Control Panels All Ensemble settings are made from Apogee’s Maestro Settings panel or Logic Pro’s Apogee Control Panel. Certain settings can be also be made from OS X audio control panels. It’s possible to open multiple control panels simultaneously, as settings made on one control panel a

• Navigating the Front Panel 1. Power Switch – Press this button to apply power to Ensemble. When Ensemble’s AC input is connect- ed, the switch will light dimly to indicate that the unit is in Standby. 2. STATUS LED – This multi–color LED provides a quick visual indication of the status of various param- eters. • A solid blue LED indicates that Ensemble is lo

• Apogee ensemble, APOGEE ELECTRONICS 12 Ensemble – User’s Guide Maestro Control: Settings - Settings All Ensemble settings are made from Apogee’s Maestro Settings panel or Logic Pro’s Apogee Control Panel. If you’re using Logic Pro, please see the description of the Apogee Control Panel in the Logic Pro documentation. Unit select - When multiple Apogee devices are connected to the computer, this selection designates which device is currently being controlled by Maestro. Identify Unit – When checked, all LEDs on the “active” Ensemble’s front panel light, thereby allowing easy identication of the hardware receiving software control panel settings. Clock Source Select – This dro

• Apogee ensemble, APOGEE ELECTRONICS 6 Ensemble – User’s Guide Getting Started Quickly 5. DAW conguration Congure your Core Audio compatible software to communicate with Ensemble hardware I/O. For example, in Logic 8 Pro : Choose Preferences > Audio and click on the Devices tab. In the Devices window, click on the Core Audio tab (gure 9). Check the Enabled box, select Ensemble in the Device eld, and verify that the 24 Bit Record- ing box is checked. Click on Apply Changes when compete (gure 10). To “customize” the I/O routing l

• Apogee ensemble, APOGEE ELECTRONICS 4 Ensemble – User’s Guide Getting Started Quickly 1. Installing software Insert the included CD in your Mac’s optical drive slot, double click on the Ensemble Software Installer icon, and follow the onscreen directions provided by the installer program. After the installa- tion is complete, it will be necessary to restart your Mac. 2. Hardware connections Using the enclosed FireWire cable, connect one of Ensemble’s FireWire ports to a FireWire 400 port on your Mac (gure 2). Connect Ensemble’s AC input to an AC outlet of 90 to 250 volts; Ensemble�

• APOGEE ELECTRONICS Ensemble – User’s Guide 25 Declaration of Conformity—FCC Apogee Ensemble This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been

• Apogee ensemble, APOGEE ELECTRONICS 2 Ensemble – User’s Guide The serial number is located on the rear panel of the unit. We suggest you record the serial number in the space provided below. Refer to it whenever you call an authorized Apogee Electronics repair facility or the manufacturer. Please be sure to return your completed warranty card immediately! Ensemble Serial No._________________________________________________ Purchase Date__________________________________________________________ Dealer_________________________________________________________________ Phone____________________________________

• Apogee ensemble, APOGEE ELECTRONICS 22 Ensemble – User’s Guide Troubleshooting The power switch’s blue LED is lit, but no other LEDs are on; is the unit in operation? – Not yet; when Ensemble is connected to AC power, the power switch illuminates dimly to indicate that the unit is in Standby. Press the power switch to power up Ensemble. How can I quickly verify if the Ensemble system is operating correctly? – Verify that Ensemble’s STATUS LED is solid blue (veries Ensemble hardware clocks); – Check

More Instructions:

	Apogee ensemble Operation & user’s manual 08-08-2022 32	DOWNLOAD
	Apogee ensemble Supplementary manual 17-12-2023 2	DOWNLOAD
	Apogee ensemble Operation & user’s manual 22-04-2023 42	DOWNLOAD
	Apogee ensemble Operation & user’s manual 15-11-2022 59	DOWNLOAD

Related Products and Documents (Desktop):

Comparable Devices:

Similar Resources:

• Intel ASR1500PASBP (27 pages) Intel® Server Board S5000PAL Intel® Server Chassis SR1500 Intel® Server Chassis SR1550 Intel® Server Chassis SR2500 Spares/Parts List and Configuration Guide A reference guide to assist customers in ordering the necessary components to configure the Intel® Server Board S5000PAL with the appropriate 1U and 2U Intel Rack Mount Server Chassis. …

• Havis-Shields C-TCB-3 (2 pages) C-TCB-3-INST-1-05 INSTALL INSTRUCTIONS C-TCB-3 TELESCOPING COMPUTER BASE 1995–1999 CHEVROLET/GMC CK-PICKUP, TAHOE, SUBURBAN, YUKON TOOLS REQUIRED: 3/16” Allen wrench 3/8” Standard Socket Set 3/8” Metric Socket Set 3/8” Ratcheting Wrench Powered drill w/ 3/16” drill bit Open-end wrench set HARDWARE & COMPONENTS: QTY DESCRIPTION PART # 1 P …

• HP ProLiant ML115 (27 pages) Front View:Front View:Front View:Front View:Rear View:Rear View:Rear View:Rear View:1.DVD-ROM Drive1.Power Supply Outlet2.Power LED2.Rear System Fan3.Drive Activity LED3.PCI Slot Cover Lock4.Front Bezel4.PCI Slot Covers5.Full Length Card Retainer5.HP ProLiant100 G5 Lights-Out 100c Remote ManagementCard port(Optional)6.HDD Controller Card (Optional)6.LAN Port …

• Aplex ACS-2685 (82 pages) ACS-2685 User Manual 1 ACS-2685 Box PC User Manual Release Date Revision Nov. 2012 V1.0 ® 2012 Aplex Technology, Inc. …

• CHIEF KWT110 (28 pages) INSTALLATION INSTRUCTIONSAll in One Work StationSpanish Product DescriptionGerman Product Description Portuguese Product Description Italian Product DescriptionDutch Product DescriptionFrench Product DescriptionKWT-110 …

• Rockwell Automation 6181P (20 pages) Installation InstructionsIntegrated Display ComputersCatalog Numbers 6181P, 6181FAbout This PublicationThis publication provides procedures on how to install the integrated display computers. It also describes how to make peripheral, power, and network connections. For information on operating and troubleshooting, refer to the user manual listed under Additi …

Comments, Questions and Opinions: