Hytera VM685 Manual 

Text of Hytera VM685 User Guide:

• Hytera VM685, Post-recording This feature allows you to record the video for a predefined time period after pressing the Video Recording key to finish recording. To enter post-recording mode, do as follows: 1. Press the Video Recording key to start recording normal video, or press the Emergency Alarm key or Menu/Back key to start recording important video. 2. Press the Video Recording key again to stop recording. The product will enter post-recording mode automatically. To exit post-recording mode:  For normal vi

• No. Part Name No. Part Name 9 Lens 19 Microphone 3 10 Light Compensator 20 Keys (Menu/Back Key, Left Key, Play/Pause/Confirm Key, Right Key) 2.2 LCD Icons Icon Description WLAN is enabled. WLAN hotspot is enabled. BT Feature is enabled. The wireless connection is established. The remaining capacity of t

• Hytera VM685,  2006/66/EC  2011/65/EU  2012/19/EU  2014/53/EU Please note that the above information is applicable to EU countries only. Caution 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2..The product shall only use USB port to charging. 3.The max operating of the EUT is 60°C. and shouldn’t be lower than -30°C. 4.The device complies with RF specifications when the device used at 0cm form your body. Body SAR: 0.23

• Hytera VM685, LED Indication Description Glows orange Call idle. You can press and hold the PTT key to speak. Flashes orange rapidly Idle status in Emergency Alarm mode. Flashes red once every five seconds The battery runs low. Please recharge or replace the battery in time. Flashes red slowly The product is recording video. Flashes orange slowly  The product is recording audio.  The remaining capacity of the TF card is less than 2 GB. The LED indicator flashes red and blue in turn. The BT is pai

• Hytera VM685, 4.11 Taking Photos When Recording Videos To take photos when recording videos, press the Photo Taking key. 4.12 Preview and Playback You can preview and play videos, audios, and photos in the similar way. This section takes video preview and playback as an example. To preview and play videos, do as follows: 1. In the Live View mode, press the Menu/Back key. 2. Press the Left key or the Right key to select Video. 3. Press the Play/Pause/Confirm key to preview the videos. 4. Press the Left key or the Right key to select the video to play. 5. Press the Play/Pause/Confirm key to play. You can do the following during playing:  Pause: Press the Play/Pau

• Hytera VM685, Icon Conventions The following icons are available through this manual: : Indicates references that can further describe the related topics. : Indicates situations that could cause data loss or equipment damage. : Indicates situations that could cause minor personal injury. Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or area. The Company retains the ownership of its trademarks and product names. All other

• Hytera VM685, 3.4 Charging the Product The LED indicator flashes once every five seconds, indicating that the battery is low. To charge the product, do as follows: The LED indicator tells you the charging status of the product. See 0 Description for details.

• Hytera VM685, 3.3 (Optional) Connecting the Accessory Connection Cable Skip this section if you have not purchase the accessory connection cable. The following figure shows how to connect the accessory connection cable. To disconnect the cable, press both sides of the cable connector and remove the connector with proper force. Note

• Hytera VM685, 7. Optional Accessories Use the accessories specified by the Company only; otherwise, we shall not be liable for any losses or damages arising out of the use of any unauthorized accessories. Contact your local dealer for the optional accessories of the product. Caution

• Hytera VM685, Display Type TFT-LCD 262K color display Built-in Storage Capacity  Standard: 16 GB  Optional: 32 GB/64 GB/128 GB Video Format mp4 Video Encoding Format H.264 Video Resolution VGA, 720P, 1080P Video Frame Rate 30FPS/60FPS Audio Format AAC (Advanced Audio Coding) Photo Format JPG Picture Resolution 4608 x 1296 (16-megapixel), 3072 x 1728 (5-megapixel), 2304 x 1296 (3-megapixel) Pre-recording/Post-recording Time 20s/30s Speaker Power 2 W Microphone  One silicon microphone, -38 dB  One Electret microphone, -42 dB WI-FI 802.ll b/g/n (AP mode and STA mode suppor

• Hytera VM685, 6. Care and Cleaning To guarantee optimum performance as well as a long service life of the product, please follow the tips below. Product Care  Do not pierce or scrape the product.  Keep the product away from substances that can corrode the circuitry.  Do not hold the product by connection cable.  Attach the USB port cover when the USB port is not in use. Product Cleaning  Power off the product before cleaning.  Make sure the product is completely dry before use.  Clean up the dust and fine particles on the product's surfa

• Hytera VM685, 4. Basic Functions and Operations 4.1 Turning the Product On or Off Turning the Product On Press and hold the On/Off key for 3s to enter the Live View mode. Turning the Product off Press and hold the On/Off key for 3s. 4.2 Basic Settings Basic settings allow you to set the BT, WLAN, WLAN hotspot, language, screen, volume, silent mode, night vision, and other features. To enter the basic settings screen, press and hold the Menu/Back key in the Live View mode. 4.2.1 BT BT setting allows you to enable or disable BT and Device Match features, view Device Name and MAC Address. To enable the BT feature, do as follows: 1. Press the Play/Pause/Conf

• Hytera VM685, The IR LED has not been turned on automatically when the product is recording videos in the dark. The Night Vision feature is not enabled. Enable the Night Vision feature. The product gives no alert; the indicator does not light up; the display lightness is at the lowest value. The Silent Mode is enabled. Disable the Silent Mode. The product gives no response to operations. The system is crashed. Press the Audio Recording key, the Left key, and the Right key simultaneously to power off the product, and then power on it again. If the above solutions cannot fix your problems, or you ma

• Hytera VM685, and view the IP address. To enable WLAN, do as follows: 1. Press the Play/Pause/Confirm key to enter the Hotspot On/Off screen. 2. Press the Left key or the Right key to select On , and then press the Play/Pause/Confirm key. You can press the Left key or the Right key to select the Network List or IP Address to view detailed information.  To view the network list and select the device to be connected, do as follows: 1. Press the Left key or the Right key to select Network List , and then press the Play/Pause/Confirm key. 2. Press the Left or the Right key to select the device to b

• 4.3 Waking Up the Product To wake up the product after it enters the Sleep Mode, press the On/Off key. 4.4 Turn the Display on or off Turn the Display On To turn the display on, press any key except PTT . Turn the Display Off To turn the display off, press the On/Off key. The display will be turned off automatically if you set a period f

• Hytera VM685, 5. Troubleshooting Phenomena Analysis Solution The product cannot be powered on. The battery may be improperly installed. Remove the battery and attach it again. The battery may run out. Recharge or replace the battery. The radio battery and the charging probes are in poor contact due to dirtied or damaged battery contacts. Clean the battery contacts. Wireless connection cannot be established. The product is out of the communication coverage of the radio. Make sure that the product and t

• Hytera VM685, -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This RVM (Remote Video Speaker Microphone) meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by indepen

• Hytera VM685, 2. Press the Left key or the Right key to select the desired language, and then press the Play/Pause/Confirm key. 4.2.5 Display Brightness To adjust the display brightness, do as follows: 1. Press the Left key or the Right key to select Screen, and then press the Play/Pause/Confirm key. 2. Press the Left or the Right key to select Brightness, and then press the Play/Pause/Confirm key. 3. Press the Left or the Right key to select the brightness value, and then press the Play/Pause/Confirm key. Screen Off To set the time for the screen to be turned off when no operation is detected, do as follows: 1. Press the Left key or the Right key to select Screen, and

• Hytera VM685, 2. Product Introduction 2.1 Product Layout 1 5 6 7 8 9 10 6 7 11 12 15 16 13 17 18 19 20 14 2 3 4 No. Part Name No. Part Name 1 Push-to-Talk (PTT) Key 11 Microphone 1 2 Video Recording Key 12 Speaker 3 Audio Recording Key 13 Accessory Interface (10-pin) 4 Photo Taking Key 14 Battery Latch 5 Light Sensor 15 USB Connector 6 Infrared (IR) LED 16 Emergency Alarm Key 7 LED Indicator 17 On/Off Key 8 Microphone 2 18

• Hytera VM685, Preface Welcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from the product, please carefully read this manual before use. This manual is applicable to the following product: VM68x Remote Video Speaker Microphone

• 4.19 Initiating Emergency Alarm When the product is wirelessly connected to the portable radio, pressing the Emergency Alarm key can initiate an emergency alarm to ask for help from your companion or the control center, and start important video recording simultaneously. The emergency alarm has the highest priority. You can initiate

• Hytera VM685, 3. Before Use 3.1 Attaching the Battery Use only the Hytera standard or optional battery. Polarity reverse and use of other batteries may result in explosion and fire hazards. The following figure shows how to install the battery. To remove the battery, turn off the product, and then go through the following steps reversely. 3.2 Installing the Belt Clip The following figure shows how to install the belt clip. To remove the belt clip, go through the following steps reversely. Caution

• Hytera VM685, 4.15 Adjusting the Volume This feature is available only when the product is wirelessly connected to the multi-mode advanced radio.  To adjust the call volume during a call, press the Left key to decrease the volume, press the Right key to increase it.  To adjust the alert tone volume when the product is in standby mode, press the Left key to decrease the volume, press the Right key to increase it.  To adjust the video/audio volume when playback, press the Left key to decrease the volume, press th

• The Sleep Mode starts when no operation is detected. 4.2.6 Volume This feature allows you to adjust the volume for the alert, video playback, and audio playback. To adjust the volume, do as follows: 1. Press the Left key or the Right key to select Volume, and then press the Play/Pause/Confirm key. 2. Press the Left key or the Right key to

More Instructions:

Hytera VM685 Quick reference manual 07-02-2023 6

DOWNLOAD

Related Products and Documents (Microphone):

Comparable Devices:

Similar Resources:

• Hama Smart 004634 (2 pages) SmartLavalier MicrophoneLavalier Mikrofon00004634Replacing the battery:1. Beforeusing the product for the rst time, please open the battery compart-ment(twisttop). Remove thebattery isolation sheet and close thebattery compartment.2. When replacing the battery,pay attention to the positive and negative polesand insertthe LR44buttoncellinto the batterycomp …

• Kurzweil KM-2U (5 pages) KM-2U User ManualImportant Safety Instructions• Read the instruction manual carefully and completely before using the product.• Always include the instruction manual when passing the product on to third parties.• Do not use the product if defective or damaged.Power Requirements and Compatibility!The KURZWEIL KM-2U receives power supply from the compute …

• Shure SCM810 (15 pages) Models SCM810 and SCM810E User GuideShure Brothers Incorporated222 Hartrey AvenueEvanston IL 60202-3696 U.S.A.27A8504 (OL)1995, Shure Brothers Inc.Printed in U.S.A.AUTOMATIC MICROPHONE MIXERDESCRIPTIONThe Shure Model SCM810 is an automatic microphone mixer us-ing Shure’s patented Intellimix operational concept. Intellimix ac-tivates only those micro …

• ETS SM1-U-PM (2 pages) SM1-U-PM Microphone and Pre-Amplifier Instructions The SM1-U-PM is a high quality, 12V-24VDC powered, pre-amplified, moisture resistant, Uni-directional microphone designed to connect to DRVs, IP cameras, etc. Note- the audio output of the SM1-U-PM is switch selectable “line level” (0db) or “mic …

• Toa WM-4310 (8 pages) OPERATING INSTRUCTIONSUHF WIRELESS MICROPHONE WM-4310WM-4310AWM-4310HPlease follow the instructions in this manual to obtain the optimum results from this unit.We also recommend that you keep this manual handy for future reference.TABLE OF CONTENTS1. SAFETY PRECAUTIONS ............................................................................... 22. GENERA …

• Shure MV51 (70 pages) USB MICROPHONEMV51USER GUIDELe Guide de l’UtilisateurGuia del UsuarioGuida dell’UtenteРуководство пользователяBedienungsanleitung日本語繁體中文Manual do Usuário사용자 가이드Panduan Pengguna用戶指南Gebruikershandleiding© 2015 Shure Incorporated 27A29740 (Rev. 1)Printed in U.S.A. …

Comments, Questions and Opinions: