Manualios.com

Apple Xserve Replacement Instructions Manual

Apple Xserve Manual Online:

3.2, 1764 votes
Apple Xserve User Manual
Apple Xserve User Guide
Apple Xserve Online Manual

Text of Apple Xserve User Guide:

  • Apple Xserve,  Xserve (Late 2006) 073-1101 Rev. A Front Panel Board Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Online instructions are available at http://www.apple.com/support/diy/. Working Safely Inside the Xserve Always touch the Xserve enclosure to discharge static electricity before you touch any components inside the Xserve. To avoid generating static electricity, do not walk around the room until you have nished working inside the server and have replaced the cover. To minimize the possibility of damage due to static discharge, wear an a

  • Xserve (Late 2006) Front Panel Board Replacement Instructions 2 Unplug all cables from the Xserve. Note: If you have trouble releasing a cable from the back panel, try using a small screwdriver or other at tool to depress the tab on the cable connector. To avoid inadvertently unlatching a drive module during handling, use the enclosure key to lock the en

  • Apple Xserve, Xserve (Late 2006) Front Panel Board Replacement Instructions 3 Removing the Installed Front Panel Board Note: Before removing the front panel board, you must remove the locking mechanism rod. Locking Mechanism Rod Pull back the latch to release the gear end of the locking mechanism rod. Tilt up the gear end of the rod and remove the rod from the server. Front Panel Board Locate the front panel board. 1. 2. 1.

  • Apple Xserve, Xserve (Late 2006) Front Panel Board Replacement Instructions 4 Release the two locking levers on the front panel board cable connector and disconnect the cable from the front panel board. Remove the two Phillips screws that mount the front panel board to the chassis. 2. 3.

  • Apple Xserve, Xserve (Late 2006) Front Panel Board Replacement Instructions 5 Slide the board back slightly and release the two clips on either side of it. Tilt the board up and remove it from the Xserve. Installing the Replacement Front Panel Board Slide the replacement front panel board into place at the front of the enclosure. Important: When replacing the front panel board, make sure the board slides under the black plastic cover of the light pipe. Press the board down so that it is secured by the two side

  • Apple Xserve, Xserve (Late 2006) Front Panel Board Replacement Instructions 6 Replacing the Locking Mechanism Rod Insert the key-hole end of the rod into the port on the front bezel. Note: Make sure the small circle on the front of the rod points to the left. It should align with the “unlocked” symbol on the bezel. Pull back the latch that secures the rod, and gently press the rod down until it clicks into place. Closing the Xserve Replace and secure the cover. Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve in the rack. If the server case was locked, use the enclosure key to lock the security lock on the front panel. 1.

  • Apple Xserve, Xserve (Late 2006) Front Panel Board Replacement Instructions 7  Apple Computer, Inc. © 2006 Apple Computer, Inc. All rights reserved. Under the copyright laws, this document may not be copied, in whole or in part, without the written consent of Apple. Every eort has been made to ensure that the information in this document is accurate. Apple is not responsible for printing or clerical errors. Apple 1 Innite Loop Cupertino, CA 95014-2084 USA + 1 408 996 1010 http://www.apple.com A

Related Products and Documents (Server Board):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Phanteks PH-PWHUB Installation manual phanteks/ph-pwhub-746.pdf 14 Jul 2022 2
2 Hanna Instruments PCA 300 Series Instruction manual hanna-instruments/pca-300-series-X23.pdf 20 Oct 2022 60
3 Generic TR 125 Operation & user’s manual generic/tr-125-P7E.pdf 31 Jul 2022 52
4 Kohler KD625-3 Owner's manual kohler/kd625-3-9B9.pdf 25 Feb 2023 136
5 Printronix SL5000r Quick reference manual printronix/sl5000r-YFF.pdf 03 Nov 2022 28
6 Sony CDX-GT264MP Installation/connections sony/cdx-gt264mp-87V.pdf 03 Jul 2022 2 0.29 Mb

Similar Resources:

  • Intel

    S2600CP Family

    (187 pages)
    Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide A Guide for Technically Qualified Assemblers of Intel® identified Subassemblies/Products Order Number: G54899-001 …
  • Amulet Hotkey

    CoreCard MX7000

    (2 pages)
    MX7000 CoreCard® Field Replacement Unit (FRU) for the MX7000Quick Start Guidewww.amulethotkey.comQS-MX7K-0010 v1.0 October 2020For Health and safety informaon, refer to the sheet LS-AHKL-0001.The CoreCard Field Replacement Unit (FRU) is an upgrade that will improve the funconality of the CoreModule. This guide tells you how to install a new FRU.Field …
  • Intel

    S2400SC

    (161 pages)
    Intel® Server Board S2400SC Technical Product Specification Intel order number G36516-002 Revision 2.0 December, 2013 Platform Collaboration and Systems Division – Marketing …
  • Intel

    S3000PT

    (2 pages)
    Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Copyright © 2006, Intel Corporation. All rights reserved.Thank you for buying an Intel® Server Board S3000PT. The following information will help you integrate your new serve …
  • VersaLogic

    Grizzly

    (30 pages)
    Remote Management Users Manual REV. September 2020 Grizzly (VL-ESU-5070) A rugged embedded server unit featuring the Intel® C3958 16-core micro-server processor and 10 GbE networking ports. …
  • MSI

    K9ND Speedster2 Series

    (104 pages)
    iK9ND Speedster2 SeriesMS-9661 (V1.X) Server BoardG52-96611X39661v1.2-Preface.p65 2008/11/14, 上午 10:461PDF created with pdfFactory Pro trial version www.pdffactory.com …

Comments, Questions and Opinions: