Overland Storage REO 1000 Setup Manual

Text of Overland Storage REO 1000 User Guide:

• Overland Storage REO 1000, 44 X Configuring the Software Environment Overland Storage REO 1000™ with Protection OS™ Software Device Type: Tape Compression: Dyn. Tape Max. Size: iSCSI Target Name: Disk, Tape, Dyn. Tape Yes or No Device Type: Tape Compression: Dyn. Tape Max. Size: iSCSI Target Name: Disk, Tape, Dyn. Tape Yes or No Device Type: Tape Compression: Dyn. Tape Max. Size: iSCSI Target Name: Disk, Tape, Dyn. Tape Yes or No Device Type: Tape Compression: Dyn. Tape Max. Size: iSCSI Target Name: Disk, Tape, Dyn. Tape Yes or No Device Type: Tape Compression: Dyn. Tape Max. Size: iSCSI T

• Overland Storage REO 1000, 32 X Using the REO SoftKey to Start the REO 1000 Overland Storage REO 1000™ with Protection OS™ Software d In the IPADDR and NETMASK fields, enter the applicable addresses for the management interface for the REO Appliance on your network, and change the ONBOOT field to yes. e Save the file; when asked if you want to replace the existing file, click Yes. 4 To configure Data Port 1, complete the following: a Right-click the ifcfg-eth0 file, and click Properties. b On the General tab, if the Read-only check box is selected, clear it, and then click OK; otherwise, click Cancel. c Right-click the ifcfg-eth0 file aga

• 90 X Creating a Virtual Tape-Library (VTL) Overland Storage REO 1000™ with Protection OS™ Software 2 In the DVT Capacity Limit box, enter the maximum size (up to 2000 gigabytes, depending on space available) that you want to allow each virtual cartridge to reach. Note: If you decide to change the capacity at a later date, you must either delete this VTL and re-creat

• Overland Storage REO 1000, Determining Whether a Disk Drive is Faulty or There is a Problem with the REO Appliance W 125 REO SERIES™ Setup Guide For example, in the iSCSI Initiator Properties dialog box for the Microsoft initiator, you can check the Active Sessions tab to determine if there is a connection that needs to be terminated. 2 Log on to the GUI. 3 In the left pane, under System Menu, click Physical Volume Management. 4 In the Physical Volume Management page, click the Add button next to the disk drive whose Status is NOT PRESENT. When a disk is unavailable, it appears in the FREE DRIVE POOL section o

• Overland Storage REO 1000, Creating Logical Volumes W 65 REO SERIES™ Setup Guide Creating Logical Volumes Using this feature, you can create up to 64 LUNs (volumes) of various sizes in 1 GB increments. Note: The size of a device reflects the space that is available on a disk; one GB equals one billion bytes. (The REO Appliance uses the calculation of 1000 ¯ 1000 ¯ 1000 instead of 1024 ¯ 1024 ¯ 1024.) 1 Under REO Standalone Devices in the left pane, click Logical Volume Management. 2 On the Logical Volume Management page, click Add Volume. 3 In the Volume Size box on the Create New Logical Volume page, enter the size (in

• Overland Storage REO 1000, 22 X Setting Up the REO 1000 Overland Storage REO 1000™ with Protection OS™ Software  Make sure there is unrestricted air flow around the unit and through the vents in the sides and rear of the case.  Route external cables so that they can be connected easily without blocking air vents or impeding air flow.  Protect the appliance from extreme temperature and humidity. Overland Storage recommends that you install the unit in a clean, air- conditioned environment where water and moist

• Overland Storage REO 1000, W 145 REO SERIES™ Setup Guide Sense key. A SCSI error message contains three sections, the first of which is the sense key (also known as “sense”). Additional information is contained in the second section (additional sense code [ASC]) and the third section (additional sense code qualifier [ASCQ]). SMTP server. The Simple Mail Transfer Protocol (SMTP) server is a networked computer that stores and processes incoming and outgoing e-mail. (also known as mail server) Target. The target is a resource that receives and executes client requests. TCP/IP.

• Overland Storage REO 1000, Reviewing Pre-Installation Requirements W 15 REO SERIES™ Setup Guide Reviewing Pre-Installation Requirements Before attempting to operate the REO Appliance with your backup servers, verify that your network meets the minimum requirements specified in the following sections. Important: If you purchased multiple units, be aware that the keys are not interchangeable and Overland strongly recommends that you make a backup copy of the files on the keys before and after you configure them. Network For best results, Overland Storage strongly recommends that you use a dedicated GbE network to share the storage resource

• Overland Storage REO 1000, 92 X Creating a Virtual Tape-Library (VTL) Overland Storage REO 1000™ with Protection OS™ Software 5 To add the initiator and return to the Initiator Configuration page, click Commit. 6 If you want to add another initiator, click Add Initiator, and repeat the process. 7 After you are done creating initiators, click Commit. The VTL Manager page is displayed, with a summary of the new VTL you created listed at the bottom of the page. 8 On each applicable backup system, use the management tool that came with your initiator to specify the target information. For more information, see Configuring the iSCSI Initiator w

• Overland Storage REO 1000, 74 X Configuring REO Devices as Disk or Tape Devices Overland Storage REO 1000™ with Protection OS™ Software After the change is processed, the Device Configuration page reappears and displays the serial number assigned to the device. You can use this serial number to identify the device in your backup software. Any changes you make are also reflected on the Device Summary page. Note: The size of a device reflects the space that is available on a disk; one GB equals one billion bytes. (The REO Appliance uses the calculation of 1000 ¯ 1000 ¯ 1000 instead of 1024 ¯ 1024 ¯ 1024.) This identifies the seri

• Overland Storage REO 1000, 120 X Basic Troubleshooting Overland Storage REO 1000™ with Protection OS™ Software Page Not Found Message (HTTP 500 Internal Server Error) Appears in the GUI If the REO GUI goes blank for a several minutes and then displays a “The page cannot be displayed” message (which is further identified as an HTTP 500 Internal Server Error), it might be because a disk drive has developed a problem or because a disk was removed from the appliance without warning. 1 Make sure that all disks are inserted in the appliance. 2 Close the browser window, and then log back on to the REO GUI. 3 Use the Physical Volume Management page to verify that all

• Overland Storage REO 1000, Understanding the Summary Pages W 97 REO SERIES™ Setup Guide Reviewing the Device Summary Page The Device Summary page provides an immediate view of your REO Appliance and its status. The following shows two examples of what you might see on this page (what you see depends on how you configure your appliance). The following explains each of the columns:  REO Device ID. This entry is automatically designated by the REO Appliance. Depending on the configuration, you might have up to 64 IDs in this list.  iSCSI Target Name. Displays either

• 128 X Basic Troubleshooting Overland Storage REO 1000™ with Protection OS™ Software  If the process succeeds, the volume is re-created. If the Status is OK, you can resume normal operations with the REO Appliance.  If the process fails, an error message appears and the disks remain in the FREE DRIVE POOL section. You must replace the applicable disk with a good disk. For

• 26 X Setting Up the REO 1000 Overland Storage REO 1000™ with Protection OS™ Software 13 Slide the appliance into the rack, and attach the captive screw on each panel extension (left and right sides) to the rack and nut plate. Installing the Disk Carriers and Disk Drives The disk carriers, which contain the disk drives, are packaged separately, which allows you to insert them into the app

• Overland Storage REO 1000, Entering the System Information W 53 REO SERIES™ Setup Guide Entering the System Information 1 In the left pane, under System Menu, click System Configuration. 2 In the System Information section of the right pane, enter the REO Name. Enter up to 16 characters to name the REO Appliance. You can use letters or a mixture of letters and numbers, and you can also use hyphens (-). Overland Storage recommends that you change this name (the default is REO), especially if you use multiple REO Appliances in your network. 3 If you want to make the VTL Manager page

• Overland Storage REO 1000, 6 X Contents Overland Storage REO 1000™ with Protection OS™ Software Entering the System Information . . . . . . . . . . . . . . . . . . 53 Configuring Logon Information . . . . . . . . . . . . . . . . . . 54 Configuring E-mail Alerts . . . . . . . . . . . . . . . . . . . . . 54 Setting the Time and Date Information . . . . . . . . . . . . . . . 56 Connecting the Data Port . . . . . . . . . . . . . . . .

• Overland Storage REO 1000, Using the Log Files W 113 REO SERIES™ Setup Guide Sending the Files to Technical Support 1 In the left pane, under System Menu, click Maintenance. 2 In the REO System Configuration File section, click Create. 3 When the confirmation message appears, click OK to continue. 4 When the completion message appears, click Continue. Click Maintenance.

• 64 X Changing the Volume Setup or Creating Logical Volumes Overland Storage REO 1000™ with Protection OS™ Software Note: Although the volumes are available while they are in an initializing state, performance is impacted. Overland Storage strongly recommends that you wait until the Status is OK before using a volume. 7 If you chose to create logical volumes, complete the steps

• Overland Storage REO 1000, Working with the REO 1000 W 95 CHAPTER 10 Working with the REO 1000 This chapter provides a few tips on working with the REO Appliance including:  Logging on to the Web interface.  Reviewing the information displayed in the Device Summary.  Switching from one configuration to another.  Understanding how disk drives are numbered. Logging On from Any System with Network Access After you have completed configuration of the REO Appliance, you can access the REO GUI from any system that has network access to the IP address of the Management Port. Be aware of the following:  If you log on from

More Instructions:

	Overland Storage REO 1000 Quick start manual 01-01-2023 2	DOWNLOAD
	Overland Storage REO 1000 Setup manual 03-01-2023 124	DOWNLOAD

Related Products and Documents (UPS):

Comparable Devices:

Similar Resources:

• Toshiba UNINTERRUPTIBLE POWER SYSTEM 1600XP (100 pages) UNINTERRUPTIBLE POWER SYSTEM (UPS)Part # 60616-008July 2012Manufactured in the USA© Copyright 2012 TOSHIBA International Corporation All rights reserved.1600XP SERIESINSTALLATION AND OPERATION MANUALSINGLE PHASE - 3.6/6/8/10/14/18/22 KVA …

• Powerware 5140 (15 pages) 5140Integrationwww.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 15140 - pSeries (RS/6000)Integration◆TOPICS◆ Preparation✔Installation◆ Startup◆ Optional Features◆ Help/Resources …

• CyberPower OL6KERT3UDPM (25 pages) User’s Manual OL6000ERT3UD OL8000ERT3UD OL10000ERT3UD OL6KERT3UDPM OL8KERT3UDPM OL10KERT3UDPM Cyber Power Systems Inc. www.cyberpower.com K01-0000424-03 …

• Xtreme Power Conversion 700VA (37 pages) T90 Online UPS700VA, 1000VA, 1500VA, 2000VA, 3000VA ModelsUser & Installaon Manualwww.xpcc.com | © 2014 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 9/15/14) …

• Emerson Liebert itON BX (2 pages) Liebert® itON BX Quick-Start Guide – 600VA, 230V 1BIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during installation and maintenance of the UPS. z Intended for installation in a controlled environment. z Maximum ambient temperature 104°F (40°F). CAUTION! To prevent th …

• Orion SCR2 (9 pages) 1 25,216&5N9$2N-LINE 57UPS User Manual and Instructions Table of contents …

Comments, Questions and Opinions: