Manualios.com

Intex ECO20220 Owner's Manual

Intex ECO20220 Manual Online:

3.75, 680 votes
Intex ECO20220 User Manual
Intex ECO20220 User Guide
Intex ECO20220 Online Manual

Text of Intex ECO20220 User Guide:

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 15 Initial startup and operation: Before operating, be sure that: • All the hoses have been connected and tightened securely, and correct amount of filter sand have been loaded. • The entire system is connected to a grounding type receptacle protected by a residual current device (RCD). OPERATING INSTRUCTIONS (continued) CAUTION The filter control valve has a closed position. The pump should never be on when

  • 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 10 SETUP INSTRUCTIONS (continued) Sand loading: IMPORTANT: Use No. 20 silica sand or glass sand with particle size range 0.45 to 0.85 mm (0.018 to 0.033 inches) an

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 2 Warnings ......................................................................................... 3 Parts References ........................................................................... 4-5 Setup Instructions ........................................................................ 6-13 Product Specifications .......................................................

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 8 PRODUCT SPECIFICATIONS SETUP INSTRUCTIONS The sand filter removes suspended particles and sanitize your pool. Pool chemistry is a specialized area and you should consult your local pool service specialist for details. TOOLS REQUIRED: One (1) Phillips screwdriver Pump location and mounting: • Thesystemmustbeinstalledonasolidlevelandvibration-freebase. • Providealocationprotectedfromtheweather,moisture, flooding and f

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 30 TROUBLESHOOTING GUIDE • Line cord must be plugged into a 3 wire outlet that is protected by a Class A Ground Fault Circuit Interrupter, or RCD. • Reset circuit breaker. If circuit breaker trips repeatedly, your electrical system may have a defect. Turn off circuit breaker and call an electrician to correct the problem. • Let th

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 21 INTEX POOLS SALT TABLE This table shows the dosage of salt needed to achieve and maintain the optimal 3000 ppm salt level. Pool Size Water Capacity (Calculated at 90% for Frame Pool and 80% for Easy Set & Oval Pool) Salt Needed for Startup 3.0g/L (3000ppm) Salt Needed when Low Salt Detected (CODE “91”) (Gals) (Liters) ECO20220/ ECO20230 ECO15220/ ECO15230 ECO20220/ ECO20230 ECO15220/ ECO15230 (Lbs) (Kgs) (Lbs

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 14 OPERATING INSTRUCTIONS  • Riskofelectricshock.Connectthisproductonlytoagroundingtypereceptacle protected by a residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by a RCD. Use a qualified electrician to install the RCD, which has

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 12 SAND FILTER PUMP HOSE CONNECTION SETUP The 6-way valve has three hose connection ports. 1. Connect one hose (12) end to the pre-filter inlet and the other end of the hose to the lower plunger valve with the strainer. Ensure the hose nuts are securely tightened. 2. Connect the second hose (12) between the el

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 31 TROUBLESHOOTING GUIDE (continued) INSUFFICIENT CHLORINE WHITE FLAKES IN THE WATER NO LED DISPLAY • Without cyanuric acid. • Insufficient operating hours of the Saltwater System. • The salt level in the pool water is less than 2000ppm. This is insufficient. • Chlorine loss due to intense sunlight exposure. • The bather load has increase

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 11 6-way valve installation: 1. Lower the 6-way valve over the tank slowly, and ensure the bypass pipe protruding underneath the 6-way valve fits securely into the center pipe hub (8) top opening (see drawing 19) . IMPORTANT: There are three hose connection ports on the 6-way valve, ensure the outlet connection (from filter to the pool) on the valve is facing

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 19 LED CODE CHART LED Reading Definitions FP Filter Pump Working Mode 80 Boost Mode 00 Stand-By Mode (Start-up) 01 Minimum Operating Hour (1 hour remaining) 02 Operating Hours (2 hours remaining) 03 Operating Hours (3 hours remaining) 04 Operating Hours (4 hours remaining) 05 Operating Hours (5 hours remaining) 0

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 6 The strainer grid prevents large objects from jamming and/or damaging the filter pump. If your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring. The part numbers here onward refer to the parts depicted in the Parts List section of this manual. To install, do the following: 1. In a counter-clockwise motion unscrew

  • 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 27 MAINTENANCE (continued) POOL CARE & CHEMICALS • All pools require care to keep the water clear and hygienically clean. With proper chemical control, your filter will help attain

  • 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 3 IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To r

  • 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 4 PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. " * ": Optional. NOTE: Drawings for illustratio

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 9 4. In a clockwise motion screw filter housing nut (17) onto the motor water inlet (See drawings 12.1 & 12.2) . 5. Replace the basket (16) and leaf trap cover (14) back to the pre-filter housing (See drawings 13.1 & 13.2) . SETUP INSTRUCTIONS (continued) 13.2 14.1 14.2 14.3 12.2 12.1 17 17 13

  • Intex ECO20220, 261A (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website. Due to a policy of continuous product improvement, Intex reserves the ri

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 34 LIMITED WARRANTY Your Sand Filter Pump & Saltwater system has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Sand Filter Pump & Saltwater system and accessories listed below. The following provision is only valid within the European member states countries: The legal regulation of Directive 1999/

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all risks and or dangers. For additional safeguards, also familiarize yourself with the following general guidelines as well a

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 13 SAND FILTER PUMP HOSE CONNECTION SETUP (continued) For INTEX pool size 16' and below: 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (33). Be careful not to lose the step rubber washer (30). 2. Grasp the plunger valve assembly. Make sure the step wa

  • 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 25 MOTOR PRE-FILTER CLEANING AND MAINTENANCE 1. Make sure the filter pump is switched off, then disconnect the power cord from the electrical outlet. 2. Turn both plunger valve handles ful

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 23 INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID) Pool Size Water Capacity (Calculated at 90% for Frame Pool and 80% for Easy Set & Oval Pool) Operating Time (hours) at different ambient/air temperatures (Gals) (Liters) ECO20220/ECO20230 ECO15220/ECO15230 10 - 19°C (50 - 66°F) 20 - 28°C (68 - 82°F)

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 32 TROUBLESHOOTING GUIDE (continued) LED PANEL CODE PROBLEM SOLUTION LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). 1 . Circulation line is blocked. 2 . Incorrect inlet and outlet hose direction. 3 . Scale on the flow sensor. 4 . Flow sensor cord is loose. 5 . Device is set and operating in backwash, rinse or waste mode. 6 .

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 18 SALTWATER SYSTEM OPERATION (continued) 5. Boost cycle • First time installation, press and hold “BOOST” button for 5 seconds until the indicator lights up and the LED display “80”. This indicates that the saltwater system has started E.C.O. and more chlorine sanitizer production. Y

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 24 SALT TABLE FOR COMMON NON-INTEX POOLS SALT CALCULATION FORMULA FOR ALL POOLS Salt Needed for Startup (Lbs) Salt Needed for Startup (Kgs) Salt Needed when Low Salt Detected (Lbs) Salt Needed when Low Salt Detected (Kgs) Water Capacity (Gals) x 0.025 Water Capacity (Liters) x 0.003 Water Capacity (Gals) x 0.0067 Water Capacity (Liters) x 0.0008 Water Capacity Salt Needed for Startup Salt Needed when Low Salt Detected (CODE “91”) (Gals) (Lit

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 28 POOL MAINTENANCE & CHEMICAL DEFINITIONS Consult with local swimming pool dealer for water treatment. • Do not add pool chemicals directly to the skimmer. This may damage the cell. • Maintaining a salt and sanitizer level above the recommended range can contribute to the corrosion of the pool equipment. • Check the expiry date of the test kit as the test results may be inaccura

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 26 ELECTROLYTIC CELL CLEANING E.C.O. ELECTRODE CLEANING The titanium electrode and E.C.O. electrodes have a self cleaning function incorporated into the electronic control’s programming. In most cases this self cleaning action will keep the electrodes working at optimum efficiency. If the pool water is hard (high mineral content) the electrodes may require periodic manual cleaning. To maintain maximum performance, we recommend that you open

  • Intex ECO20220, 261A SAVE THESE INSTRUCTIONS (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014 English Page 7 POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (33) (see drawing 5). Be careful not to lose the step rubber washer (30). Place the plunger valve on the ground in a safe place. 2. In a counter-clockwise motion unscrew the strainer nut (31) from the threaded connector (33). Leave the flat washer (32) on the connector (33). 3. Install the

Related Products and Documents (Swimming Pool Pump):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 LG LMN126HVT Information sheet lg/lmn126hvt-T78.pdf 23 Jul 2022 2
2 Magnavox 13MC3206 - Tv/dvd Combination Manuel d'utilisation magnavox/13mc3206-tv-dvd-combination-Y5K.pdf 18 Jul 2023 64
3 Waters Network Systems GSM2109 Operating manual waters-network-systems/gsm2109-G4F.pdf 18 Dec 2022 92
4 Brother MFC-8120 Operation & user’s manual brother/mfc-8120-7E6.pdf 29 Jun 2022 213 4.5 Mb
5 Philips CDR570BK99 Instructions for use philips/cdr570bk99-J99.pdf 09 Nov 2022 5 0.47 Mb
6 DLS RC6.2 Owner's manual dls/rc6-2-CVQ.pdf 20 Oct 2023 2

Similar Resources:

  • Utilitech

    UT1100IGPP

    (52 pages)
    1Lowes.com®ITEM #0240058, 0407162IN-GROUND POOL PUMP MODEL #UT1100IGPP, UT11501IGPPEspañol p. 27Date CodePurchase DateUtilitech & UT Design® is a registered trademark of LF, LLC. All rights reserved.Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-994-4148, 8 a.m. - 8 p.m., EST, Monda …
  • Calpeda

    MPC Compact Pool

    (12 pages)
    Self-priming swimming pool pumpswith built-in strainerMPCCompact PoolOPERATING INSTRUCTIONS1. Operating conditionsStandard construction- For water circulation in swimming pool filtrationsystems.- For clean or slightly dirty water with solids insuspension, with a maximum temperature of60 °C.- Maximum permissible hydrostatic pressure andpump discharge pressur …
  • Oase

    AquaMax Eco Premium 4000

    (22 pages)
    22265/08-15Máy bơm AquaMax Eco Premium4000/6000/8000/10000/12000/16000/2000022265 GA AquaMax Eco Premium_end_. 25.08.15 14:11 Seite 2EN Operating InstructionsVI Hướng dẫn vận hành1 …
  • aqua technix

    AQUA Master Series

    (24 pages)
    Original GebrauchsanweisungOriginal installation and operating manualInstructions de montage et d’utilisation originalesAQUA MasterAQUATECHNIUmwälzpumpen, selbstansaugend-primingPompes de circulation, auto-amorçantesDGB *Bean …
  • Pentair Pool Products

    Onga

    (14 pages)
    OWNER’S MANUALLeisure TimePool PumpsThe pump must be supplied through a Residual CurrentDevise (RCD) having a rated residual operating current notexceeding 30mA.Should you the installer or owner be unfamiliar with the correctinstallation or operation of this type of equipment you should contactthe distributor/manufacturer for the correct advice before proc …
  • STA-RITE

    WATERFORD SYSTEMS JWPS5EL

    (16 pages)
    WATERFORD SYSTEMSSWIMMING POOL PUMPO W N E R’ S M A N U A LINSTALLATION, OPERATION & PARTSMODELS1/2 HP 3/4 HP 1 HP 1-1/2 HPJWPA5C JWPA5D JWPA5E JWPA5FJWPA5DL JWPA5EL JWPA5FLJWPA5DL JWPA5E7 JWPA5F7LJWPA5D7L JWPA5E7L JWPS5ELJWPS5EL3/4 HP/2 SPEED 1 HP/2 SPEED 1-1/2 HP/2 SPEEDJWPXYD JWPAXYE JWPA5YFLJWPXYDL JWPAXYEL JWPA5YF7LJWPA5YELJWPA5YE7LJWPA5Y7ELSta-Ri …

Comments, Questions and Opinions: