HP IEEE-1394b Installation Manual

Text of HP IEEE-1394b User Guide:

• HP IEEE-1394b, IEEE-1394b PCI Express Card installation Introduction This document describes how to install an IEEE-1394b PCI Express (PCIe) card in HP Z series workstations. Kit contents ● IEEE-1394b PCIe card ● External 1394b cable ● SATA power extension cable ● 1394b Unibrain drivers CD ● Warranty information ● Installation instructions Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go/productbulletin. © 2011 Hewlett-Packa

• Warnings and cautions WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching. WARNING! Any surface or area of the equipment marked with this symbol indi

• HP IEEE-1394b, Step 1—Preparing for component installation NOTE: Workstation models vary. All illustrations are examples only. Download and install updates 1. Check for available system BIOS updates specified for your HP workstation model and operating system at http://www.hp.com/go/workstationsupport. 2. Install the system BIOS updates, if available. Accessing the internal components of the computer 1. If you need help preparing the computer for this installation, consult the removal and replacement procedures in the service guide for your computer at http://www.hp.com/support/manuals. 2. Power down t

• HP IEEE-1394b, Step 2—Installing the IEEE-1394b card 1. Install the IEEE-1394b card (1) in the selected PCIe expansion slot. 2. Lower the expansion slot retention clamp and close the retention clamp lever (2). Figure 2 Installing the IEEE-1394b card Step 3—Configuring the cabling 1. Connect the male end (labeled P1) of the SATA power extension cable to the workstation optical drive power supply, according to the following workstation series: ● For the HP Z400 workstation, use the connector labeled P8 ● For the HP Z600 and Z800 workstations, use the connector la

• HP IEEE-1394b, 4. If the 1394 header is not present on the system board, plug the 1394 I/O cable located on the side of the workstation chassis into the 1394b card (1). IMPORTANT: Do not unplug the front I/O connector from the system board. Figure 4 Connecting the 1394 I/O cable to the 1394b card Step 4—Reassembling the workstation 1. Reinstall the card support, if applicable. 2. Reinstall the side access panel. 3. Reconnect power to the workstation and all external devices. 4. Restore power to the workstation and all external devices. Japanese 日本語 This document is available in Jap

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• August VGB300 (12 pages) VGB300USB Video Capture CardUSB Video Capture-KarteCarte de Capture Vidéo USBScheda USB di Acquisizione VideoTarjeta Capturadora de Video USBPLKarta przechwytująca USB …

• YASKAWA DX100 (554 pages) Part Number: 155507-1CDRevision: 7MANUAL NO. 7RE-CSO-A037DX100OPERATOR’S MANUALFOR MATERIAL HANDLING, PRESS TENDING, CUTTING, AND OTHER APPLICATIONSUpon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain for future reference.MOTOMAN INSTRUCTIONSMOTOMAN- INSTRUCTIONSDX100 INSTRUCTIONSDX100 OPERATOR …

• StarTech.com PEX1000MMSC (4 pages) 1000 Mbps Gigabit Ethernet Multi Mode SC Fiber PCI Express Card - 550mStarTech ID: PEX1000MMSCThe PEX1000MMSC 1000 Mbps Gigabit Ethernet Multi Mode SC Fiber PCI Express Card - 550m offers theperfect "Fiber-to-the-desk" solution, turning an available PCIe slot into an SC Multimode fiber connection.A simple solution for connecting a computer directly …

• Addi-Data PC104-PLUS1500 (49 pages) DIN EN ISO 9001:2000 certified Edition: 01.07 - 05/2008 ADDI-DATA GmbHAirpark Business CenterAirport Boulevard B21077836 RheinmünsterGermanyTechnical support:+49 7229 1847– 0Technical description PC104-PLUS1500 Digital I/O board, optically isolated …

• Exsys EX-3650 (2 pages) 6 5 Die EX-3650 ist eine M.2 NGFF Schnittstellenkarte mit einem M.2 NGFF Port, für den Anschluss von M.2 NGFF Module. Die Module M.2 NGFF 2280, 2260 und 2242 können eingesetzt werden. Es werden Module unterstützt mit B-Key sowie auch B+M Key. Die EX-3650 gewährleistet eine sichere Datenübertragung bis zu 6GB/s! Es ist nicht möglich die I/O Adressen und …

• StarTech.com PEX2S953LP (2 pages) Quick-Start GuideTo view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.Manual Revision: February 8, 2019 1:23 PMProduct Diagram (PEX2S953LP)Port Function 1 Serial Port • Used to connect Serial Devices2 Screws• Used to attach the Serial Port to the Bracket• Used to secure a Serial Cable to the …

Comments, Questions and Opinions: