Jensen JMC-1250 Operation & User’s Manual

Text of Jensen JMC-1250 User Guide:

• Jensen JMC-1250, BLUETOOTH 3-SPEED STEREO TURNTABLE 3 CD CHANGER MUSIC SYSTEM WITH DUAL CASSETTE DECK USER MANUAL JMC-1250 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

• E-1 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure

• Jensen JMC-1250, E-2 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery

• Jensen JMC-1250, E-3 COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ge

• Jensen JMC-1250, E-4 PROTECT YOUR FURNITURE This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self- adhesive felt pads, available at h

• E-6 1 DUST COVER 20 REMOTE SENSOR 2 LCD DISPALY 21 PRE-SET EQ BUTTON 3 VOLUME UP/DOWN BUTTON 22 PLAY/PAUSE BUTTON 4 X-BASS BUTTON 23 DISC SKIP BUTTON 5 STANDBY LED INDICATOR 24 PHONO/BLUETOOTH/AUX BUTTON 6 FM MODE / DUBBING SPEED SELECTOR 25 TUNER/BAND BUTTON 7 POWER ON/STANDBY BUTTON 26 TAPE BUTTON 8 STOP 27 CD DOOR

• Jensen JMC-1250, E-7 REMOTE CONTROL BUTTON DESCRIPTION OPEN/CLOSE PRESS TO OPEN & CLOSE THE CD DOOR POWER PRESS TO TURN THE UNIT ON AND OFF (STANDBY MODE) DISC 1,2,3 PRESS TO SELECT THE DISC FOR PLAYBACK DIRECTLY DISC-CH PRESS TO SELECT THE NEXT DESIRE DISC AND ROTATE THE DISC TRAY SLEEP PRESS TO ACTIVE SLEEP FUNCTION TIMER PRESS TO SET THE ALARM MODE ON/OFF PHONO/BT/AUX PRESS TO ACTIVE PHONO/BLUETOOTH OR AUX MODE EQ PRESS TO SELECT EQ MODE TIMER MODE TO REVIEW AND SET THE ALARAM ON/OFF TIME CD PRESS TO ACTIVE CD MODE TAPE PRESS TO ACTIVE TAPE MODE TUNER/BAND PRESS TO ACTIVE TUNER MODE AND

• Jensen JMC-1250, E-8 BATTERY INSTALLATION The battery compartment is located on the back of the remote control. 1. Remove the battery compartment door by pressing in on the tab and lifting it off. 2. Insert two AAA size batteries (not included) into the battery compartment following the polarity markings inside the battery compartment. 3. Replace the battery compartment door. BATTERY WARNING 1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit. 2. Use only the size and type of batter

• E-9 SETTING THE CLOCK The clock has to be set before using the system for the first time. When you plug the system into an AC outlet for the first time, the LCD DISPLAY (#2) will show 12:00 and need to be set. 1. Press MEMORY / CLOCK-ADJUST BUTTON (#14), the Hour digits will flash. Press OR BUTTON (#12 or #28) to select the correct hour. Press the MEMORY / CLOCK-

• Jensen JMC-1250, E-10 Note : • If no buttons are pressed after 5 seconds when setting the Radio Station Presets, the JMC-1250 will return to tuner mode • The Radio Station Presets may be lost if the main power switch is turned off. If this occurs, you will need to reset the Radio Station Preset. • You can overwrite a present station by saving the new frequency in its place. FM and FM Stereo Reception 1. Release the FM Mode button (#6) to select Stereo Mode. The LCD display (#2) will show “ST” when receiving a stereo program. 2. Press down FM Mode button (#6) to select Mono Mode. The LCD display (#2) will not show “ST” even rec

• Jensen JMC-1250, E-11 Remark : The auto-stop may not work on some records because the play area is out of the preset adjustment, so it may stop before the last track finishes. When this happens disable the the auto-stop feature by placing the auto-stop switch (#34) in the “ off “ position, then it will run to the end of the record but will not stop automatically (turn off the unit by power button or switch back the auto-stop switch (#34) to “on“ position to stop the platter rotate). Then put back the tone arm to the rest position. BLUETOOTH OPERATION Pairing a Bluetooth enabled device with the JMC-1250. 1.

• Jensen JMC-1250, E-12 4. Don't forget to switch off the power of your Bluetooth device as well. 5. The music playback will automatically be paused when you have an incoming call. When the call is ended, the JMC-1250 will start playing again. AUX IN OPERATION You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of the JMC-1250 by connecting the AUX IN Jack (#37) to your external player’s audio out jack or headphone jack. 1. Plug one end of an au

• Jensen JMC-1250, E-13  CD PLAY / PAUSE MODE 1. Press the PLAY/PAUSE BUTTON (#22) to start playback. The first track of the first disc will be played and the play indicator will appear on the LCD DISPLAY (#2). 2. You can also press either the “ DISC 1”, “ DISC 2 ”, “ DISC 3 ” buttons on the remote control to start playing a specific disc in the tray. 3. To interrupt, press the PLAY/PAUSE BUTTON (#22) once, and the display will start flashing. Press again to resume playback.  STOP MODE 1. If the STOP BUTTON (#8) is pressed during PLAY or PAUSE, the system will go into stop mode.  SKIP MODE (SKIP UP /SKI

• E-14 • •• • CD PROGRAMMING Up to 60 tacks can be programmed to be played in any required order from one CD or all CDs in the CD changer. 1. Set in CD mode and press the STOP BUTTON (#8). 2. Press the MEM/CLK-ADJ BUTTON (#14) 3. Press the DISC SKIP BUTTON (#23) to select the desired disc. 4. Press SKIP DOWN BUTTON (#12) or SKIP UP BUTTON (#28) to select the

• Jensen JMC-1250, E-15 CONTINUOUS PLAYBACK OF TWO CASSETTES 1.) Insert a pre-recorded tape into both cassette compartments with the tape you want to play first in DECK 2. 2.) Press the Play button on DECK 2 to begin playback. 3.) Press the Pause button and then Play button of DECK 1. 4.) When the tape in DECK 2 ends, it stops and the Pause key of DECK 1 will release automatically to begin playback on DECK 1. NOTE: Continuous playback will not function if you play the tape in DECK 1 first. RECORDING This cassette recorder features an Automatic Recording Volume Level Control System that prevents over

• Jensen JMC-1250, E-16 C. RECORDING FROM CD  Press the CD BUTTON (#10) to enter CD Mode.  Insert a blank cassette tape in deck 1 which suitable for recording.  Press the “PAUSE” button first and then “RECORD” & “PLAY” key at deck 1. Recording function is now on STANDBY.  Activate the CD player, and then press the “PAUSE” key at deck 1 to start recording.  To stop recording, press the “STOP” button on CD player first, then press the “PAUSE” key and then the “STOP/EJECT” key at deck 1. D. RECORDING FROM THE TURNTABLE  Press the PHONO/BLUETOOTH/AUX BUTT

• Jensen JMC-1250, E-17 7. Press the “MODE” button on remote to confirm, “ ” icon flash and timer source CD/PHONO/TUNER/TAPE appears on the display. 8. Press the MEM/CLOCK-ADJ button (#14) once, timer source flashing. 9. Press the SKIP UP/ DOWN buttons (#28/12) to set source to be controlled by timer and then press the MEM/CLOCK-ADJ button (#14) to finish. 10. You can press the “ MODE ” button repeatedly to review the presets time in order. NOTE: 1. The timer setting will automatically cancel if no button is pressed in a period of about 10 seconds. 2. If you set ON/OFF timer for PHONO or TAPE, plea

• E-18 CARE AND MAINTENANCE 1. Do not subject the unit to excessive force, shock, dust or extreme temperature. 2. Do not tamper the internal components of the unit. 3. Clean your unit with a dry cloth. Solvent or detergent should never be used. 4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. 5. Keep your unit away fr

• Jensen JMC-1250, E-19 • •• • If the cassette feels tight while performing operation shown (see Fig.2), the tape may be jamming due to ridges formed in the winding of the tape (visible through the center window). These may be removed, in most cases, by fast winding of the cassette from one end to the other and back again.  Use only well-known brands of tape. Avoid use of C-120 cassettes. Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch the tape surfaces. HEAD CLEANING The tape heads, pinch roller and capstan require perio

• Jensen JMC-1250, E-20 TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit is disconnected from the AC outlet Reconnect to the AC outlet. The unit does not respond (no power) AC outlet is not functioning. Plug another device into the same outlet to confirm the outlet is working. AM band is too noisy The reception at the set location is poor. Slightly rotate the unit for the best reception. Radio paused about 1 second when switch from phonograph mode to tuner mode This

• Jensen JMC-1250, E-21 SPECIFICATION Power Requirement Main unit: AC120V~ 60Hz Remote control 2 x 1.5V “AAA” (UM-4) size batteries (not included) Frequency Range Radio Band FM 88 ~ 108 MHz AM 520 ~ 1710 KHz Power Consumption Main Unit: 35Watts SPECTRA GREEN NOTICE At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for more information on

• Jensen JMC-1250, E-22 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA

More Instructions:

Jensen JMC-1250 Operation & user’s manual 03-04-2024 12

DOWNLOAD

Related Products and Documents (Micro Music System):

Comparable Devices:

Similar Resources:

• Philips MCD388/55 (6 pages) Register your product and get support atwww.philips.com/welcomeMCD388ES Imprima el manual de usuario en www.philips.com/support.PT-BRImprima o manual do usuário em www.philips.com/support. …

• Philips DCM3120/12 (26 pages) Register your product and get support atwww.philips.com/welcomeEL  ES  FI  FR  EN  C …

• Sharp XL-MP2H (36 pages) 04/12/15 XL-MP2H_FRONT.fmThank you for purchasing this SHARP product. To obtain the best performance from this product, please read thismanual carefully. It will guide you in operating your SHARP product.MICRO COMPONENT SYSTEMXL-MP2H Micro Component System consisting of XL-MP2H (main unit)and CP-MP2H (speaker system).MODELOPERATION MANUALXL-MP2H …

• Sony CMT-BT60 (2 pages) CMT-BT60 (GB) 4-456-707-11 (1)WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.Do not expose the appliance to naked flame sources (for example, lighted candles).To reduce the risk …

• Philips MCD289/58 (30 pages) Register your product and get support atwww.philips.com/welcomeMCD289DVD Micro TheatreUser manualêÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓθÁÓ‚‡ÚÂÎflpg001-pg016_MCD289-58-Eng-A 2008.2.21, 14:311 …

• Philips MCM240 (1 pages) 210 mm (8.26")Speaker RightMain UnitHolesSpeaker LeftWall mounting instructionsDrill holes on wall at hole positions marked.Use screws to mount the main unit on the wall.• Use this sheet as a template. Mark the position where you want to hang the unit on thewall (as shown) and then drill two 6mm diameter holes.• Secure the dowels and screws in the h …

Comments, Questions and Opinions: