Manualios.com

Appro LC-7222E Installation & Operation Manual

Appro LC-7222E Manual Online:

3.8, 567 votes
Appro LC-7222E User Manual
Appro LC-7222E User Guide
Appro LC-7222E Online Manual

Text of Appro LC-7222E User Guide:

  • Appro LC-7222E, 40 5.1.4 Change the System Setting Please follow the steps below to change the date and time of the system setting through the network if necessary.  Set the Date and Time of the system 1. Click the System button in the home page to enter the “Date And Time” page (default). 2. Choose one of the three modes shown on the page to set the Date and Time of the system. The three modes are “Set Manually”, “Synchronize With Computer Time”, and “Synchronize With SNTP Server”. 3. Click the Submit button to submit the

  • Appro LC-7222E, 74 (3) Select the recording time: Sets the periods of time in recording. Select the Begin time and the End time the time markers will display above. Please use the up (increase) and down (decrease) arrows to adjust the setting. Add the selected period schedule. You can also hold down the left mouse button to drag a period. Erase the selected period schedule. You can also use the right mouse button to cancel the period. (4) Select the recording mode. (5) Press to show the scheduled recording list. (6) Set the secondary schedule: Activate or inactivate the other recording modes besides the primary schedule. (7) Option buttons: Undo: Undo the

  • Appro LC-7222E, 49  Change the Application Setting —Language Setting. Please follow the steps below to change the Language setting via the network if necessary. 1. Click the Language button on the left side to enter the “Language Setting” page. 2. You have an option as to which language to use. The default is “English” 3. Click your selected language and click "Submit" to set it.

  • Appro LC-7222E, 83 3. Choose “ON” from the “PPPoE mode” list to activate it. 4. Enter the Account and the Password which are provided from your ISP. 5. Click the Submit button to submit the setting. NOTE: Please refer to section 5.1.8 for more details. ◇Use the Sub Hostname to view the IP camera 1. Click the URL block at the top of the PC screen. 2. Type in the DDNS Host Name of the IP camera into the URL block and press the “Enter” button to enter the login page. 3. Enter the user name and fill in the password. 4. Click the “OK” button and enter the home page of the IP camera. Question 4: How to add or modify the user

  • Appro LC-7222E, 87 If you have clicked “No”, please manually type in insertions as required in the “Free IP Address”, “Gateway Address”, and “NET Mask”. Follow each insertion you make by typing in the “Login Name” and “Password”, and click “UPDATE” to send your alterations to the IP camera. 2. Automatically search “Free IP Address”. If you clicked “Yes” the “Free IP Address” box will appear on the right. 3. Select and double click any of the addresses in the “Free IP Address” box on the r

  • Appro LC-7222E, 41  Change the System Setting — Timestamp. Please follow the steps below to change/add the timestamp through the network if necessary. 1. Click the Timestamp button on the left side of the “System - Date and Time” page to enter the “System - Timestamp” page. 2. Click “Enable Timestamp” to checkmark the attached box and activate the function 3. Add or modify any timestamp’s data if necessary. 4. Enter the "Timestamp Color" you have chosen. 5. Enter the "Timestamp Location" you have chosen. 6. Enter the "Timestamp Format" you have chosen. 7. Click the Submit button to sub

  • 100 ARP and ping from UNIX or GNU/Linux: 1. Start a shell 2. Type the following as superuser (root): arp -s <IP address> <Ethernet address> [or arp -s <IP address> < MAC address>] ping <IP address> Example: arp -s 192.168.1.100 00-0C-0C-00-00-01 ping 192.168.1.100 The device responds to the ping in the examples above if the ne

  • Appro LC-7222E, 32 Description of function keys: IP Address: Enter the 4-byte IP Address in the appropriate blank space (the value in each box may be anywhere between 0 and 255). Every IP camera has to own an IP address to be identified on the network. Netmask: Fill in the 4-byte Subnet Mask in the required blank spaces (usually any numbers between 0 and 255). It is used to identify the subnet where the IP camera is sited. Default Gateway: Type in the 4-byte Gateway in the relevant blank spaces (each unit value must be between 0 and 255). Primary Nameserver: Enter the 4-byte DNS Server Address in the blank spaces provided (ea

  • Appro LC-7222E, 92 2. Install UPnP Packets As described before, Microsoft Windows XP ® doesn’t start the UPnP service by default; however, we have to install some packets before we initialize it. The following steps will help you to install them. Step1: From the Start menu, point to Set Program Access and Default, and then click it. See Figure 8 Figure 8 Step 2: When the Add or Remove Programs dialog box appears, click the Add/Remove Windows Components button. See Figure 9. Figure 9 Step 3: Check the Network Services in the Windows Component Wizard dialog box,

  • Appro LC-7222E, 19 NOTE: When connecting to a network, each connected IP camera must be assigned a unique IP, which must be in the same class type as your network address. IP addresses are written as four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if the connected network is identified as Class C, for example, the first three sets of numbers of the IP camera IP address must be the same as the network address. If the connected network is identified as Class B, the first two sets of n

  • Appro LC-7222E, 72  Popup Message: Sets the maximum number of the pop-up messages, the displaying time and the pop-up forms. Tick mark the blank space for each device to activate it.  E-mail Notice: Sets each camera to activate the E-mail Notice function of the three situations: "Motion Alarm", "Sensor Alarm", and "DISK Full". Set the SMTP, the E-mail address and the attached file numbers to mail the user when the alarms occur. Tick mark the blank space for each device to activate it.

  • 7 2. DESCRIPTION OF THE FRONT/REAR VIEW 2.1 Front Panel and Rear Panel -- Front Panel -- -- Rear Panel -- 1 6 7 8 2 3 4 5 1 MICROPHONE: The IP camera has an additional audio function. The device has a microphone built into its front panel which records sound. 2 Plug Inlet: A DC 12V inlet that connects to an external power supply. 3 ETHERNET (PoE): This is a standard RJ-45 conne

  • Appro LC-7222E, 106 APPENDIX 6. –PoE Installation Method 1. Provided accessories: IP Box Camera Ethernet (CAT5 UTP/Straight Through) Cable Power over Ethernet Injector (input rating: DC 48V) AC Adapter (input: AC 100-240V; output: DC 48V) Power Cord Warning: Please follow the steps in this instruction carefully. Connecting these adapters incorrectly may result in damage to your network devices.

  • Appro LC-7222E, 43  Change the System Setting — Digital I/O. Please follow the steps below to change the Digital I/O through the network if necessary. 1. Click the Digital I/O button on the left side of the “Date and Time” page to enter the “Digital I/O Setting” page. 2. Mark the “Digital Input” “ON” or “OFF” and the “Digital Output” “ON” or “OFF”. Click your choices to enable. 3. Click the Submit button to submit the new user’s settings. 4. Click the Home button to

  • Appro LC-7222E, 2 5.1 M ICROSOFT INTERNET EXPLORER ......................................................26 5.1.1 Connecting the IP camera ................................................................................................................26 5.1.2 Change Image Setting ......................................................................................................................28 5.1.3 Change the Network Setting ............................................................................................................31 5.1.4 Change the System Setting .......................................................................

  • 84 7. SPECIFICATIONS Model Number LC-7222E (NTSC) Video sensor 1/3" Sony Super HAD CCD (with HQ1 DSP) System NTSC Horizontal resolution 520 TV lines Lens C/CS mount Auto Iris type DC-iris Day and Night Mechanical IR Cut Filter: Auto; Color / Monochrome AWB 2500°K ~ 9500°K AES 1/60 ~ 1/100000 sec Video High speed shutter 1/1000 sec Color 0.5 lux @

  • Appro LC-7222E, 70 3. Device Setting: Provides four pages of settings. (1) Device Setting page (2) Image Setting page NOTE: The IP Surveillance software connects the Internet to a Network camera. There may be a problem if the bandwidth is not enough, in which case the speed rate of the image transmissions may become too low. So if you want a satisfactory speed rate in your displays, you can click the “Device Setting” button, opening a “Device Setting” screen, and set the settings of the Device page where you can change the “Audio Mechanism” function to “OFF”. Turning it “OFF” will save the bandwidth from wastage, and

  • Appro LC-7222E, 12 3. INSTALLATION Please follow the instructions and the diagram below to set up the system. NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP camera factory default Static IP address(192.168.1.168). But the IP camera Static IP address can only appear if there is a connection between the IP camera and another device. If there is no such connection, the IP camera factory default Static IP address will not appear on the monitor screen. 3.1

  • 22 4.5 TCP/IP configuration setting Click Start → Settings → Control Panel → Network. Select TCP/IP , and then click Properties. Before processing the IP camera installation in a WAN, please make sure the Internet connection works properly. If not, please contact your ISP provider.   If you are using a DHCP server, please select Obtain an IP address

  • Appro LC-7222E, 78 5.2.4.4 Lock Press the button to lock the operation of this software, and the IP Surveillance monitor will be minimized into the systray*of the Windows taskbar. To unlock the command, please click the button once, then type in the correct password. *: The Microsoft Windows systray is a portion of the Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, and Windows XP Operating Systems that helps display running programs. The systray is located on the taskbar and is commonly in the bottom right hand corner

  • Appro LC-7222E, 98 4. Scan LANCams ® through My Network Place After your installation and starting services, the UPnP protocol will take effect. You can scan all LANCams ® in My Network Place like Figure21 and Figure22 below. Figure21 Figure22 Just double click the UPnP MPEG4 IP camera the video live stream will pop up automatically without assigning any IP address in Microsoft Internet Explorer ® .

  • 62 6. This page provides the IP Address, the device type, and the MAC Address. After typing the Site name and selecting the Connect Mode, please click the "Next" button to access the next "Connect Network camera Wizard" page. NOTE: Please click the icon to see the details of the Connect Mode. 7. After finishing the setting of

  • Appro LC-7222E, 103 Figure 4 Figure 5 All we have to set in this page is the “Hostname” item. The user can choose a Sub Hostname as s/he likes from the right-hand side of the Hostname’s drop-down list. NOTE: You don’t have to set the “IP Address” in the same format as the camera’s IP Address. It will renew the IP Address automatically. After finishing the setting, please press the “Create Host” button as shown in Figure 5.

  • Appro LC-7222E, 81 6. ADVANCED OPERATION Question 1: How to view the live images of the IP camera via the Microsoft Internet Explorer on the Desktop PCs or the laptop computers in a situation where there are no monitors or television? ◇The way to get the IP address of the IP camera without a monitor: There are three way to get the IP address: Scan IP, Upnp and IP function. Scan IP: Please refer to APPENDIX 1. Upnp: Please refer to APPENDIX 2. IP function: Please refer to APPENDIX 3. Question 2: How to set up the motion detection area and its sensitivity? How to record into the SD card for 30 seconds when the motion has been activated and use t

  • Appro LC-7222E, 99 APPENDIX 3. –The ARP function Setting the IP Address The Ethernet interface on the LANCam has a default IP address (192.168.1.168) that most likely needs to be changed to make it work on your local network. You need to acquire a unique IP address (ask your network administrator). For the initial setting of the IP address the LANCam needs to be connected to the same network segment as your client, and the IP address can then be configured by using a combination of ARP and ping command. Use any of the following ways to set the IP address within thirty seconds after booting the LANCam (re-cycle the power). Setting IP using t

More Instructions:

DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sean Mandrake HB125 Manual  sean-mandrake/hb125-MT5.pdf 19 Sep 2022 4
2 Black & Decker G48TD Use and care book manual black-decker/g48td-977.pdf 21 Aug 2022 10
3 Gardenline GDLM3640 Operation & user’s manual gardenline/gdlm3640-D1R.pdf 03 Feb 2023 15
4 AIRTRONICS RD6000 SPORT Instruction manual airtronics/rd6000-sport-QN5.pdf 22 Feb 2023 63
5 Hasbro GI Joe B.A.T Attack 61975/61874 Instructions hasbro/gi-joe-b-a-t-attack-61975-61874-959.pdf 02 Dec 2023 1 0.58 Mb
6 Klipsch Icon Series Owner's manual klipsch/icon-series-3ZR.pdf 18 Jun 2022 8

Similar Resources:

  • Bosch

    NII-41012-V3

    (2 pages)
    1 2 3 4 56 7 8 9 106 x 30T10x4M4x4x2microSD cardIR versionMenuResetØ6 mm45°180°90°270°0°x4x4Ø6 mmØ 116 mm(4.6 in)M4x4+ -EthernetLine-in Line-outVideo 4 3 2 112VDC7 mm (0.3 in)12 VDCSELVClass 224-28 AWGRJ45Ethernet (PoE)Default: DHCP on(no DHCP: 192.168.0.1)This equipment is only to be connected to PoE networks without routing to outside plantLineG …
  • Elvox

    46216.212

    (12 pages)
    Manuale per l’installazione e l’usoInstallation and operation manual46216.212Telecamera Bullet IR IP full HD, obiettivo 2,8-12 mm, PoEIP IR Bullet Camera, full HD, 2,8-12 mm Lens, PoE …
  • Planet

    ICA-601

    (72 pages)
    ` Indoor / Outdoor Speed Dome Internet Camera ICA-601 / ICA-651 User’s Manual Version: 1.00 1/71 Date: July. 2007 …
  • Vision

    VN6XSFHD

    (2 pages)
    Quick guide VN6XSFHD Full HD CCTV Compact IR Bullet Camera Power option 12VDC Dear Customers! By selecting this product, you have decided to use a professional device that guarantees highest quality and reliability. We would like to thank you very much for your confidence and kindly ask you to read the following instructions carefully before Install …
  • Riva

    RC6702HD-6311

    (8 pages)
    RC6702(63)03-2014-B 1 Quick Installation Guide This manual provides instructions for quick installation and basic configuration of your IP device. 1. Part names and positions Please check names and positions of each part with the following images. * Make sure the polarity is correct. Incorrect connection may cause malfunction or damage the IP device. Ca …
  • INSTEON

    2864-232

    (88 pages)
    UUsseerr MMaannuuaall Outdoor HD IP Camera Model: 2864-232 V1.4 …

Comments, Questions and Opinions: