JSF Venom 4 Instructions Manual

Text of JSF Venom 4 User Guide:

• JSF Venom 4, • Intelligent R/C System • Smooth ight performance • The four-motor drive gives stable ight. • The Venom can complete several manoeuvres. • A 6-axis gyro and integrated altitude control ensures ne control in the air. Please read the instructions carefully before use. Please keep the instructions for future reference. 4 CH 2.4G CONTROL WITH SIX AXIS GYRO VENOM TY5629

• JSF Venom 4, NO.TY5629 2.4G main technical index VENOM : L:172mm x W:172mm x H:38mm Fuselage weight: 36 g Flight range: 30 M Charging time: Approx 40-50 mins Flying time: Approx 6-8 mins VENOM MAIN TECHNICAL INDEX Using Battery/Charger 1. Venom’s battery (built in): 3.7V/300 mAh Li-poly 2. Remote controller battery: 4 x 1.5”AA”(LR6) (Not included) 2.4G REMOTE CONTROLLER INSTRUCTION

• JSF Venom 4, ASSEMBLY R/C BATTERY INSTRUCTION 1. To install batteries: open the cover of battery case. (Pic1) 2. Place 4 x 1.5 “AA” (LR6) Alkaline batteries into the box with correct polarity orientation. (batteries not included). (Pic 2) 3. Close the battery cover. (Pic1) (Pic2) Tips: When the power indicator of the remote control flashes, replace the battery as per the above Notes: Install or replace the batteries under adult supervision. Retain the instructions for future reference. ATTENTION! Non-rechargeable batteries are not to be charged. Rechargeable batteries are only to be charged under adult supervision. Rechargeable batteries are to be removed from th

• JSF Venom 4, BATTERY CHARGING INSTRUCTIONS To charge the Venom, rst make sure that the power switch is on. Remove the battery cover from the underside of the Venom and connect the charging cable to the battery. Plug the USB plug into a computer USB socket and the Venom will charge. The LED will remain lit while charging, and will extinguish when the battery is fully charged. Notes: The Venom charges in 40 - 50 minutes. The flight time is approx. 6 - 8 minutes. After use, allow the battery to cool for 5 - 10 mins before charging. Ensure the motors have cooled before flying. Warning on Li-poly battery: Do

• JSF Venom 4, SAFETY WARNING: Do not pick up the Venom when the rotors are spinning. When turning the Venom on, be careful to keep long hair away from the rotors. WARNING: NOT SUITABLE FOR CHILDREN UNDER 14 YEARS OLD. Take Off Instructions: Connect the Venom’s power, and place on level ground. The LEDs will ash several times quickly. Turn on the remote control. Push the left stick fully forwards, and then backwards. You will hear a beep. Then push both sticks to the bottom right. The control light will become steady, and the Venom LED’s will ash. The Venom is now ready to be controlled. The Venom’s controls are sensitive. To take off, gradually move

• JSF Venom 4, If the Venom doesn’t y straight, it may need trimming. Follow the instructions below to trim your Venom, and make it easier to control. SPECIAL CONTROLS The right stick moves the Venom left/rightLeft/right In plenty of space, hold the right stick forward and press the roll button. The Venom will do a forward roll. Forward roll In plenty of space, hold the right stick back and press the roll button. The Venom will do a backward roll. Backward roll In plenty of space, hold the right stick left and press the roll button. The Venom will roll to the left. Left roll In plenty of space, h

• FLYING PRACTICE Below are some flying patterns that will help you practice flying your Venom TROUBLESHOOTING Spin on the spot! Fly in a rectangle. When you can go one way, try going the other! Make a landing spot and see how close you can get! Fly in a figure of eight! WARNING: Do not touch the rotors when they are spinning. Fly the Venom away from other people and in plenty of space.

• MAINTENANCE & REPAIR: Clean with a soft, damp cloth. Remove the battery before storing. Do not submerge in water. ATTENTION: Picture refers to the actual product. PARTS Part-01 Foam Set Part-02 Buttom Cover Part-03 2.4G Remote Controller Part-04 3.7V/300mAh Li-Poly Part-05 Main Blade A Part-06 Main Blade B Part-09 Carbon Fiber Tube Part-08 Plastic Of Motor S

Related Products and Documents (Quadcopters):

Comparable Devices:

Similar Resources:

• Lynx Heli Innovations ZAP 4 STD (7 pages) HELI INNOVATIONSZAP 4,5.1,6 INC FPV RACER - USER MANUALREV. 01-Date:09/06/2017 1/7SPECIFICATIONS:Weight: ZAP 4 STD: 68g, ZAP 4 STR: 69g. ZAP 5.1 STD: 84g, ZAP 5.1 STR: 85g. ZAP 6 STD: 87g, ZAP 6 STD: 89g.Material: Carbon Fiber + Plastic + Aluminium.Size: 4,5.1,6 Inches Propeller.Flight controller mount: 30.5mm x 30.5mm (For 4 Holes) …

• Udirc U61 (16 pages) USERMANUALU61▲This product is suitable for users over 14 years old.▲Stay away from the rotating propeller▲Read the<important statement and safety guidelines >carefully.Suitable for indoor flight …

• devention Scout X4 (20 pages) Scou tX4 cleUention • Auto Take off • Auto Landing • Follow me mode • Circle flight • Fence flight • Single Waypoint flight • Altitude hold mode • One key Return To Home • Automatic Cruise • IOC mode • Backtracking • Waypoint record Match with GCS Ground Station Software Quick Start Guide and Systems Flowchart • Specifications: M …

• Eachine Novice-II 1-2S Toothpick RTF (10 pages) Skip to contentManuals+User Manuals Simplified.Eachine Novice-II 1-2S Toothpick RTF Micro Drone User ManualHome » Eachine » Eachine Novice-II 1-2S Toothpick RTF Micro Drone User Manual …

• Carrera RC  370503024 (4 pages) ARRÊTPARADAMARCHE (3 sec.)ARRANQUE (3 seg.)12,4m5m 5m1083 911652x 1.5 V Mignon AA batteries 2x Accus 1, 5 V mignon AA2x Pilas de 1,5 V Mignon AA2x 1.5 V Mignon AA batteries 2x Accus 1, 5 V mignon AA2x Pilas de 1,5 V Mignon AA+‒RLRL2 a bLED OFF = ChargingDEL OFF = En chargeLED OFF = CargandoGreen = ReadyVert = PrêtVerde = Listo7L R+‒RL11122221345612ON0� …

• Snelflight QuadPod 2 (20 pages) 1 QuadPod 2 Brushless Quadcopter Thank you for purchasing the Snelflight QuadPod 2, a compact but powerful brushless-motor Quadcopter. The model can be built up in about an hour, thanks to its delightfully simple construction and plain English instructions. Everything is included, no gluing or soldering is requir …

Comments, Questions and Opinions: