Asante AWRT-300N Operation & User’s Manual

Text of Asante AWRT-300N User Guide:

• Asante AWRT-300N, Category There are five categories available. Select one of the following: Applications, Online Games, MAC Address, Ethernet Port, or Voice Device. Applications Applications: Select the appropriate application. If you select Add a New Application, follow the instructions in the “Add a New Application “section. Priority: Select the appropriate priority: High, Medium, Normal, or Low. Click Add to save your changes. Your new entry will appear in the Summary list. 44

• Asante AWRT-300N, You can configure the router’s basic wireless settings on this screen. Network Mode: If you have 802.11b/g/n 2.4GHz devices on the wireless network, select BGN-Mixed. If you have 802.11a/n 5GHz devices on the wireless network, select AN-Mixed. Note: If your wireless computer cannot detect the router after you selected AN-Mixed, please make sure your wireless adapter supports 5GHz frequency band. Network Name (SSID): You can change the router’s SSID in this field. Once you have changed the SSID, your network clients need to re-connect themselves using the new SSID. Channel: Select the desired channel. All the network clients

• Asante AWRT-300N, Static IP Select Static IP if your ISP provided you the static IP address, Subnet Mask, Default Gateway and DNS server addresses for Internet connection. PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only. Enter the Internet connection information provided by your ISP accordingly. 15

• Asante AWRT-300N, Extension Channel: Select the extension channel for Wireless N extended radio band. If you are not sure which channel to select, keep the default, Auto. SSID Broadcast : Choose to enable or disable the broadcast of your SSID (wireless network name). 6.2.2 Wireless > Wireless Security You can configure wireless security such as WPA2 or WEP encryption on this screen. Note: WPA2 Personal is the most secured encryption mode for general users. WEP is the most common encryption but the least secured. It is recommended to use WPA2 Personal

• Asante AWRT-300N, 6.1.2 Setup > DDNS Dynamic DNS (DDNS) allows any user who wishes to access your server to reach it by a registered DNS name instead of an IP address. Before you enable DDNS , you need to register an account with one of the DDNS providers listed in the drop-down menu. To Enable DDNS, select the DDNS provider you have registered with and enter the required fields. Click Save Settings to save the settings. 19

• Add a New Application Enter a Name: Enter a name for this application. Port Range: Enter the port range that the application will be using. For example, if you want to allocate bandwidth for FTP, you can enter 21-21. Select the protocol TCP or UDP, or select Both. Priority: Select the appropriate priority: High, Medium, Normal, or Low. Click Add to save your changes.

• Asante AWRT-300N, Remote Access: Select to enable or disable remote management/upgrade of the router. You can allow remote management from any IP Address or a specified IP Address as well as the port number. Backup and Restore Configurations: You can choose to backup the router’s settings so that you don’t have to manually configure the settings again if you reset the router to factory default. UPnP : Universal Plug and Play (UPnP) allows Windows Me and XP to automatically configure the router for various Internet applications, such as gaming and videoconferencing. 6.6.2 Administration > Lo

• Asante AWRT-300N, Start ~ End Port: If you are only forwarding one port, you can put the same port number in both the Start and End Port boxes. Protocol: If you are not sure which protocol to choose, select both. To IP Addres s: This should be the IP address of the computer you want to forward the ports to. Make sure that you check the Enabled box to activate the setting, then click Save Settings to save the settings. 6.5.3 Applications & Gaming > DMZ DMZ (De-Militarized Zone) is a host without the protection of the router’s firewall. It allows a computer to be exposed to unrestricted two-way communication with th

• Asante AWRT-300N, Voice Device Enter a Name: Enter a name for your voice device such as VoIP or IP Phone. MAC Address: Enter the MAC address of your voice device. Priority: Select the appropriate priority: High, Medium, Normal, or Low. Click Add to save your changes. Click Save Settings to save the settings. Summary Summary shows the configuration for various application priorities. You can Remove or Edit the configuration from this list. 49

• Website Blocking You can block the specified clients from accessing certain websites by URL or Keyword. Enter the URL or the Keyword you wish to block. 37 Click Save Settings to save the settings. To view all the policies, click the Summary button. Blocked Applications After you selected Allow Internet accessing for Access Restriction, you can conf

• Asante AWRT-300N, WPA2 Enterprise Select WPA2 Enterprise from the Security Mode. Encryption: Select either TKIP or AES as the encryption method. RADIUS Server: Enter the IP Address of your RADIUS server. RADIUS Port: Enter the port number of your RADIUS server. Default is 1812. Shared Secret: Enter the shared key. Key Renewal: Enter the desired key renewal time in seconds. Click Save Settings to save the settings. 28

• Asante AWRT-300N, Access Policy: Select a policy number from the drop down list. Enter Policy Name: Enter a name for the policy. Status: Choose to Enable or Disable the selected policy. Applied PCs Click on the Edit List button to specify the network clients. Policy only applies to the PCs that are in the list. You can specify each client by its MAC Address or IP Address. You can also specify a group of clients by entering their IP Address Range. Once you have specified all the clients, click Save Settings. Access Restriction & Schedule Select to Deny or Allow the specified clients to access the Internet by Day and Time. 36

• 6.1.4 Setup > Advanced Routing You can configure your own static routing table using the Advanced Routing function. To see the current routing table, click on Show Routing Table button. Be sure to click Save Settings to save each entry. 21

• Asante AWRT-300N, 6.1.3 Setup > MAC Address Clone Some ISPs require a registered MAC address to access the Internet. You can use the following steps to clone your PC’s registered MAC address to access the Internet. Step 1 Check the radio button Enabled . Step 2 Click the Clone My PC’s MAC button. Step 3 Click Save Settings to save the settings. 20

• Asante AWRT-300N, Internet Setup There are six Internet Connection Types: DHCP, PPPoE, Static IP, PPTP, L2TP, and Telstra Cable. Automatic Configuration - DHCP When your ISP provides dynamic IP, you can keep this default setting (This is for most cable modem users). Usually you should be able to connect to the Internet without changing any configuration. If your ISP has provided you with a host name, enter it in the optional Host Name field. Click Save Settings to save the settings. PPPoE Usually DSL service provider uses PPPoE

• Asante AWRT-300N, 6.6.3 Administration -> Diagnostics The Diagnostics screen allows you to perform Ping and Traceroute tests. Ping Test: Enter the IP or URL Address you wish to ping and click Start to Ping. Traceroute: Enter the IP or URL Address you wish to trace and click Start to Traceroute. 52

• If your ISP requires a registered MAC Address, click on the MAC Address Clone tab select Enabled, and click on the Clone My PC’s MAC button. Click Save Settings to save the settings. If you have trouble connecting to the Internet, please refer to Section 4, Veri

• Asante AWRT-300N, 2. Connecting the Router Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router. Step 1 Connect one end of a network cable to the INTERNET(yellow) port of the router and connect the other end of the cable to the DSL/Cable modem. Step 2 With another network cable, connect one end of the cable to your computer’s Ethernet port and connect the other end to one of the LAN ports of the router. Step 3 Power on the DSL/Cable modem and wait for the lights on th

• Asante AWRT-300N, 6.6.4 Administration > Factory Defaults The Factory Defaults screen allows you to set all the router’s settings to the factory default. Click on the Restore Factory Defaults button to restore all the settings to default and click OK to continue. 53

More Instructions:

	Asante AWRT-300N Quick start manual 21-02-2024 2	DOWNLOAD
	Asante AWRT-300N Specification sheet 24-02-2023 3	DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• TP-Link TL-WA801ND (2 pages) 7106507134 REV5.1.0 Before your startCongure the Access PointOperating ModesAccess Point Mode (Default Mode)Repeater/Bridge ModeScenariosYou want to transform your wired (Ethernet) network to a wireless one.Which mode do you need? Please refer to the table to choose a proper mode.Multi-SSID ModeYou want to connect your devices to dierent wireless …

• Asus RT-N53 (58 pages) RT-N53 Dual-band Wireless-N RouterThe ultra-thin and stylish RT-N53 features a 2.4GHz and 5GHz dual bands for an unmatched concurrent wireless HD streaming; with its universal repeater mode and multiple SSID feature, you can easily create various wireless environments to t your needs. User Guide …

• Epson G5150 - Wireless Lan Module 802.11A/B/G (4 pages) Declaration of ConformityAccording to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:We: Epson America, Inc.Located at: 3840 Kilroy Airport WayMS: 3-13Long Beach, CA 90806Telephone: (562) 290-5254Declare under sole responsibility that the product identified herei …

• NETGEAR WNDR4000 - N750 WIRELESS DUAL BAND GIGABIT ROUTER (2 pages) (not included)Step 2:Cable your router.Step 3:Cable your computer.Step 6:Insert Your CD.Click Router Setup and follow the steps to set up a securewireless network.Step 5:Power On Your Router.Wait until the power LEDturns solid green.Step 4:Power On Your Modem.Wait until your modem cycles on(approximately 2 minutes).N750 Wireless RouterModemResource CDLaptop …

• TP-Link TL-WA500G (13 pages) 1 Assign a static IP address 192.168.1.100 for your computer. Please refer tothe T3 in Troubleshooting guide if you need assistance. Connect to the Access Point with the Ethernet cable or via wireless.The default SSID of the Access Point is TP-LINK_XXXXXX. The XXXXXX is the last 6 characters of the Access Point’s MAC address. Plug the pr …

• MikroTik Chateau 5G (24 pages) EN - English -Quick Guide:This "Chateau 5G" series Quick Guide covers models: D53G-5HacD2HnD-TC&RG502Q-EA (Chateau 5G).This is Wireless Network Device. You can find the product model name on the case label (ID).Please visit the user manual page on for the full up-to-date user manual. Or scan the QR code with your mobile phone.https …

Comments, Questions and Opinions: