HP Engage One 2D Operation & User’s Manual

Text of HP Engage One 2D User Guide:

• HP Engage One 2D, © Copyright 2018 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: July 2018 First Edition: June 2017 Document Part Number: 937403-002

• About This Guide This guide provides information on setting up and using the scanner. WARNING! Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT: Indicates information considered important but not hazard-related (for example, m

• HP Engage One 2D, Table of contents 1 Using the scanner .......................................................................................................................................... 1 Connecting the scanner ......................................................................................................................................... 1 Reading techniques ............................................................................................................................................... 1 Scanning in hands-free mode ........................................................................................................................

• HP Engage One 2D, 1 Using the scanner Connecting the scanner 1. Turn o power to the computer. 2. Connect the scanner’s USB cable to a USB Type-A port on the I/O connectivity base. 3. Turn on power to the computer. Reading techniques The view nder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Hold the scanner over the bar code, press the button, and center the aiming beam on the bar code. The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code. Hold the scanner close to smaller bar codes, and farther away from large bar codes to get a proper

• HP Engage One 2D, Scanning in hands-free mode When the scanner is seated in the stand the scanner’s built-in sensor places the scanner in hands-free mode. When the scanner is removed from the stand it operates in its normal hand-held mode. 1. Make sure that all cable connections are secure. 2. Insert the scanner in the stand by placing the scanner onto the stand. 3. To scan a bar code, place the bar code up to the scanner and make sure that the scan line crosses every bar and space of the symbol. 4. Upon successful decode, the scanner beeps and the LED turns green. Standard product defaults The following

• HP Engage One 2D, Save NOTE: For a complete list of country codes, see the HP Engage One 2D Barcode Scanner Programming Guide at http://www.hp.com/support. Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (press the button to read) or Presentation Mode (the scanner is activated when it “sees” a bar code). Manual Trigger - Normal (Default) Presentation Mode Suix If you want a carriage return after the bar code, scan the Add CR Suix bar code. To add a tab after the bar code, scan the Add Tab Suix bar code. Otherwise, scan the Remove Suix bar code to remove the suixes. Add CR Suix Add Tab Suix Remove Su

• HP Engage One 2D, Add code ID Prex to all symbologies Scan the following bar code if you want to add a Code ID prex to all symbologies at once. Add Code ID Prex To All Symbologies (Temporary) NOTE: For a complete list of Code IDs, see the HP Engage One 2D Barcode Scanner Programming Guide at http://www.hp.com/support. Function code transmit When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in the HP Engage One 2D Barcode Scanner Programming Guide a

• HP Engage One 2D, 2 Technical support Contacting support To resolve a hardware or software problem, go to http://www.hp.com/support. Use this site to get more information about your product, including links to discussion forums and instructions on troubleshooting. You can also nd information on how to contact HP and open a support case. Preparing to call technical support If you can not solve a problem, you may need to call technical support. Have the following information available when you call: ● If the product is connected to an HP POS computer, provide the serial number of the POS computer ●

Related Products and Documents (Barcode Reader):

Comparable Devices:

Similar Resources:

• Opticon OPR 3201 (45 pages) Gun-type Laser Barcode Scanner OPR 3201 The OPR 3201 is a gun-Type laser barcode scanner that uses a short-wavelength red laser beam to enhance the visibility of scanning lines. The decoded text of barcode images is output through an RS-232C, USB, or Wedge interface. Specifications Manual …

• PATHFINDER 6057 (62 pages) Avery Dennison® and Pathfinder® are registered trademarks of Avery Dennison Corporation. TC6057(8QR Rev. AA 6/11 ©2011 Avery Dennison Corp. All Rights Reserved. QUICK REFERENCE This Quick Reference contains supply loading information and general care and maintenance procedures for the Pathfinder® 6057 printer. For more detailed information, refer to t …

• Zebra RS5100 (2 pages) RS5100 Back of Hand MountInstallation GuideBack of Hand MountThe Back of Hand Mount (which includes a hand strap), allows the RS5100 to be worn on the back of your hand and provides a remote finger trigger. It is one size to fit all and is ambidextrous.To attach the back of hand mount, perform the following three steps:1. Install the strap to the back of han …

• Syntech Information 1022K (23 pages) User's Manual CIPHER 1022 SERIES Document Number : 1022-52 Ver. 1.520 Release Date : Apr 22, 1996  1996, SYNTECH INFORMATION Co., Ltd.. All rights reserved. CipherLab is a registered trademark of SYNTECH INFORMATION Co., Ltd. …

• KoamTac KDC 470 (25 pages) ©2019 KOAMTAC, Inc. UM_KDC470475_20190517 KDC470 & KDC475 User Manual 116 Village Blvd, Suite 305, Princeton, NJ 08540 USA T: + 1-609-256-4700 F: +1-609-228-4373 [email protected] www.koamtac.com …

• Worth Data LZ165-USB (2 pages) *USBLASERSCANNERS*Worth Data® USB Laser ScannersQuickStart and Installation GuideUSB LasersThe Full USB Laser Scanners Users Manual is available on the Utilities CD-ROMin PDF format. You can also download the Manual and Setup Menus at http://www.worthdata.comWARNING: This equipment generates, uses and can radiate radio frequency energy. If not installed …

Comments, Questions and Opinions: